Panasonic LUMIX DMC F7 User Manual

51
Deleting Images (Continued)
[Delete all images]
Once deleted images cannot be 
recovered.
1Press the [ ] button.
2Press 3/4 to select [ALL] and  press 
1.
3Press 2/1 to select [DELETE] and 
press the [REVIEW/SET] button.
All images are deleted.
During deleting, do not take out the memory card or do not turn the power off.
When displaying 9 images, delete the images by 
pressing the [ ] button after 
selecting a images with
2/1and the [REVIEW/SET] button.
1
3
2



52
Writing the Print Information in the Card 
(DPOF Setting)
It is possible to write on the card 
information (DPOF data) about the images 
that you want to print and the number of 
sheets.
DPOF is an abbreviation of Digital Print 
Order Format. To use the DPOF 
corresponding system, you can add print 
information to the images on the memory 
card.
[Preparation]
Set the playback [ ]/power switch to 
[ON].
[Single copy setting]
1Press the [MENU] button.
2Press 3/4 to select [DPOF] and 
then press 
1....

53
[All copy setting]
1Press the [MENU] button.
2Press 3/4 to select [DPOF] and 
then press 
1.
3Press 3/4 to select [ALL] and then 
press 
1.
When DPOF data have been written, 
cancel all DPOF settings.
4Press 3/4 to set the number of 
sheets to be printed and then press 
1.
The number of sheets can be set 
from 1 to 15.
5Press the [MENU] button.
The DPOF setting is written on the 
card.
6Press the [MENU] button twice.
The menu will disappear.
When setting DPOF by this camera for 
images that have...

54
Writing the Print Information in the Card 
(DPOF Setting) (Continued)
[To cancel all settings]
1Press the [MENU] button.
2Press 3/4 to select [DPOF] and 
then press 
1.
3Press 3/4 to select [RESET] and 
then press 
1.
4Select [RESET].
5Press the [MENU] button.
All DPOF settings are cancelled.
6Press the [MENU] button three times.
The menu will disappear.
[Index setting]
1Press the [MENU] button.
2Press 3/4 to select [DPOF] and 
then press 
1.
3Press 3/4 to select [INDEX] and 
then press 
1.
4Press...

55
Protecting Images on the Card
It is possible to protect the important 
images recorded on the card from 
accidental erasure.
[Preparation]
Set the playback [ ]/power switch to 
[ON].
1Press the [MENU] button.
2Press 3/4 to select [PROTECT] 
and then press 
1.
3Press 3/4 to select [SELECT]/[ALL] 
and then press 
1.
4Only when setting [SELECT], press 
2/1 to select 1 image.
5Press the [REVIEW/SET] button.
6Press the [MENU] button three times.
The menu will disappear.
Even if an image is protected, it...

56
Playing Back with Slide Show 
(Automatic Playback)
All pictures selected in the card can be 
played back one-by-one automatically.
[Preparation]
Set the playback [ ]/power switch to 
[ON].
1Press the [MENU] button.
2Press 3/4 to select [SLIDE SHOW] 
and then press 
1.
3Press 3/4 to select [ALL]/[DPOF] 
and then press 
1.
ALL: for playback of all pictures
DPOF: for playback of the DPOF set 
pictures
4Press 3/4 to set [DURATION] and 
press 
1.
DURATION: it can be set from 1 to 10 
seconds.
5Press 2/1...

57
Formatting the Card
Usually, it is not necessary to format the 
card (initializing). Format the card when 
this message is displayed 
[MEMORY 
CARD ERROR].
[Preparation]
Set the playback [ ]/power switch to 
[ON].
1Press the [ ] button.
2Press 3/4 to select [FORMAT] and 
then press 
1.
3Press 2/1 to select [FORMAT].
4Press the [REVIEW/SET] button.
The card is formatted.
After formatting, recorded images 
and any other data cannot be 
recovered.
When the card is formatted by PC or other equipments,...

58
Adjusting the LCD Monitor Brightness
[Preparation]
Set the REC/power switch to [ON]. (P18)
1Press the [MENU] button.
2Press 3/4 to select [MONITOR].
3Press 2/1 to adjust the brightness.
4Press the [MENU] button.
The menu will disappear.1,4
2,3
MONITOR
PICT.SIZE
QUALITY
SENSITIVITY
SPOT MODE
ISO
640
400
2 / 3
µ´
2,3



59
Using the Auto Review
Recording with the auto review set to [ON], 
the recorded picture is automatically 
displayed on the LCD monitor for about 2 
seconds.
[Preparation]
Set the REC/power switch to [ON].
1Press the [MENU] button.
2Press 3/4 to select [SETUP] and 
then press 
1.
The setup menu will be displayed.
3Press 3/4 to select [AUTO 
REVIEW].
4Press 2/1 to select [ON].
5Press the [MENU] button twice.
The menu will disappear.
In burst mode [ ], only the first recorded picture is displayed....

60
Setting up the Beep Sound
It is possible to set the electronic sound 
when the menu is operated.
[Preparation]
Set the REC/power switch to [ON].
1Press the [MENU] button.
2Press 3/4 to select [SETUP] and 
then press 
1.
The setup menu will be displayed.
3Press 3/4 to select [BEEP].
4Press 2/1 to select [ON].
5Press the [MENU] button twice.
The menu will disappear.
1,5
2,3,4
yBEEP
AUTO REVIEW
POWER SAVE
NO.RESET
MEMORY1 / 2
3,4