Panasonic Lumix Dc-gh5 Operating Instructions

51
Recording
 (ENG) DVQX1052
∫About [More settings] (step 2 in P49)
Rotate the control dial to adjust the correction range, 
and press [MENU/SET]. : Horizontal ([A] to [B])
: Vertical ([G] to [M])
• You can also set the correction range by touching [ ]/[ ]/[ ]/[ ].
∫ About [More settings] (step 2 in P49)
Rotate the control dial to adjust the correction range, 
and press [MENU/SET].
• You can also set the correction range by touching [ ]/[ ].
White Balance Bracket
White Balance Bracket (Color...

Recording
52DVQX1052 (ENG) 
Image Stabilizer
The camera can activate either the In-Lens Image Stabilizer or In-Body Image Stabilizer, or 
it can activate both of them and reduce jitter even more effect ively. (Dual I.S. Mode)
Dual I.S.2 ( ,  ,  ), which provides more effective correction, is  also supported.
For motion picture recording, you can use the 5-Axis Hybrid Image Stabilizer, which makes 
use of the In-Lens Image Stabiliz er, In-Body Image Stabilizer, and Electronic Image 
Stabilizer.
• The...

53
Recording
 (ENG) DVQX1052
Applicable modes: 
• When using an interchangeable lens with O.I.S. switch (such as H-ES12060), stabilizer 
function is activated if the O.I.S. switch of the lens is set to [ON]. ([ ] is set at the time of 
purchase)
Select the menu. (P27)
1Select the menu. (P27)
2Enter a focal length.
2/ 1: Select the item (digit);  3/4: Setting
3Press [MENU/SET]. >
 [Rec] > [Stabilizer]
[Operation 
Mode] []
([Normal])
Camera shake is corrected for up/down, left/right, and 
rotational...

Recording
54DVQX1052 (ENG) 
Raising the telescopic effect
Applicable modes: 
Extended Tele Conversion enables you to take pictures that are further enlarged without 
deteriorating the picture quality.
• Set the picture size to [M] or [S] (picture sizes indicated with  ), and set the quality to 
[A ]  or  [ ›].
∫Increasing the zoom magnification in steps • This can be used only when recording pictures.
1Select the menu. (P27)
2Set a function button to [Zoom Control]. (P29)
3Press the function...

55
Recording
 (ENG) DVQX1052
Taking Pictures with the External Flash 
(Optional)
Applicable modes: 
You can attach a flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) and take 
pictures with it.
• Read the operating instructions of the external flash for how to attach the external flash.
∫ Removing the Hot Shoe Cover
The camera comes with a hot shoe cover attached to the hot 
shoe.
Remove the hot shoe cover by pulling it in the direction 
indicated by arrow  2
 while pressing it in the direction...

Recording
56DVQX1052 (ENG) 
Recording Motion Picture
Applicable modes: 
The camera can record 4K motion pictures in MP4 or MOV format or full high definition 
motion pictures that comply with the AVCHD standard. Audio is r ecorded in stereo.
1Start recording by pressing the motion 
picture button.
A Elapsed recording time
B  Available recording time
• Recording of motion picture appropriate for each mode  is possible.
• The recording state indicator (red)  C will flash while 
recording motion pictures.
•...

57
Recording
 (ENG) DVQX1052
∫Setting the format, size and recording frame rate
>  [Motion Picture]  > [Rec Format]
>  [Motion Picture]  > [Rec Quality]
When [AVCHD] is selected
¢ 1 AVCHD Progressive
¢ 2 Sensor output: 29.97 frames/second
¢ 3 Sensor output: 25.00 frames/second
When [MP4] is selected
[AVCHD] This data format is suitable fo r when playing back on a high-de finition TV, etc.
[MP4]This data format is suitable fo r when playing back on a PC, etc .
[MP4 (LPCM)]The MP4 data format for image...

Recording
58DVQX1052 (ENG) 
When [MP4 (LPCM)], [MOV] is selected
• Motion pictures in 4:2:2/10 bit format are intended for editing on a computer used for video production. As such, they are not supported  by TVs, recorders, and players manufactured by Panasonic.
• When [MP4 (LPCM)] or [MOV] is set  in Creative Video Mode, you can select the following 
settings using [Anamorphic(4:3)].
ItemSystem 
frequencySizeFrame rateBit rateYUV/bitImage 
compression
[C4K/10bit/150M/24p]
59.94Hz(NTSC) 4096
k2160 23.98p...

59
Recording
 (ENG) DVQX1052
Applicable modes: 
Focusing changes depending on the Focus Mode setting (P33) and the [Continuous AF] 
setting in the [Motion Picture] menu.
Applicable modes: 
Applicable modes: 
This unit automatically recor ds time code during motion 
picture recording.
• Time codes are not recorded on motion pictures recorded when 
the [Rec Format] is set to [MP4].
How to set focus when recording a motion picture ([Continuous A F])
Focus mode[Continuous AF]Description of settings...

Recording
60DVQX1052 (ENG) 
∫Conditions for outputting a time code to HDMI output
A time code is outpu t to video from the HDMI output  only when all the following conditions 
are satisfied. >
 [Motion Picture]  > [Time Code]
[Time Code 
Display] Set whether or not the time code is displayed on the recording 
screen/
playback screen.
[Count Up] Sets the time code count method.
[REC RUN]:
Counts the time code only when recording motion pictures.
[FREE RUN]:
Counts the time code even when not recording...