Panasonic Lens I/f Card Aw Pb308 Operating Instructions

-11-
In case of using a remote control unit (RCU) WV-RC550
• Connect RCU to the camera with the RCU cable AW-CA50A26 (15 m) (300 m in maximum extension length).
• To extend the RCU cable, use the cable joint adaptor WV-CA26T26 and studio cable WV-CA26U15 (15 m), or WV-
CA26U30(30 m) or WV-CA26U100 (100 m).
• A remote control unit for zoom lens and pan/tilt head is also necessary.
ZOOM/FOCUSPAN/TILT
VIDEO OUT
G/L INI/F REMOTE OPTION CARD
IRIS
DC12V IN
MENUITEM/AWCYES/ABCNO/BAR
ONPOWEROFFPOWERO    I...

-12-
Connecting Receiver and Control Cable AW-CA12T11
• The control cable AW-CA12T11 is provided with a circuit board and spacers.
• Assemble the circuit board and spacers with the receiver WV-RC100 (WV-RC150), and connect the control cable to that
circuit board.
Screws
wFit the two spacers on the connector board and fas-
ten the circuit board with the screws removed in Step
q.
Circuit board, an accessory to the cable
Spacer
qRemove the two screws on the connector board
shown from inside the receiver. 

-13-
eDisconnect the wired connector that is connected to
connector CN4 on the process circuit board, and
connect it to connector P3 on the installed circuit
board.  (Either cut or remove the band that binds the
wires.)
rRemove the wired connector that is connected to
connector CN3 on the process circuit board, and
connect it to connector P2 on the installed circuit
board.
GND terminal
Process circuit board
CN3 (6-pin)
CN4 (8-pin)
Circuit board, an accessory to the cable
Connect the 12-pin connector to...

-14-
APPEARANCE
Unit: mm (inch)
ZOOM/FOCUSPAN/TILT
98
91.721.5
70 

-15- Source voltage: 12 V DC (supplied from camera)
Power consumption: 0.02 W
Operating temperature:−10°C to +45°C (14°F to +113°F)
Operating humidity: 30 % to 90 %
Dimensions: 21.5 (W) x 70 (H) x 98 (D) mm [27/32” x 2-3/4” x 3-7/8”]
Weight: 75 g
Weight and dimensions indicated are approximate.
Specifications are subject to change without notice.
SPECIFICATIONS
STANDARD ACCESSORIES
Screw (6 mm long) ............................................... 2 pcs.
Screw (8 mm long)...

NM1199-0 7J1A395A Printed in Japan
PANASONIC BROADCAST & DIGITAL SYSTEMS COMPANYDIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA
Executive Office:3330 Cahuenga Blvd W., Los Angeles, CA 90068 
(323) 436-3500 
EASTERN ZONE:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-76
   Mid-Atlantic:One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-76
   Southeast Region:1225 Northbrook Parkway, Ste 1-160 Suwanee, GA 30024 
(770) 338-6845
   Central Region:1707 N Randall Road E1-C-1, Elgin, IL 60123...

17
Nomenclature
 Live View shooting/
Movie shooting button (p.152/172) Focal plane mark
 Menu button (p.46)
Viewfinder eyepiece Eyecup (p.124)
Dioptric adjustment knob (p.39)
Power switch (p.28)
 Erase
button (p.215)
LCD monitor (p.27, 217) Tripod socket
 Playback button (p.190)
 Info button
(p.127, 154, 176, 190, 266)  Quick
Control
button (p.44)
 
Quick Control Dial lock-release button/
Direct print button (p.42/241)  Setting button (p.46) Card slot (p.32) Quick Control Dial (p.42)
 Multi-controller...

18
Nomenclature
LCD Panel
The display will show only the settings currently applied.
Shutter speed
Busy (buSY) 
Built-in flash recycling ( buSY)
 Highlight tone priority (p.255)
Battery check (p.29)
 White balance
 correction (p.99)
Aperture
Card full warning ( FuLL)
Card error warning ( Card Err)
No card warning ( Card) 
Error code (Err)
Cleaning image sensor ( CLn)
Shots remaining
Shots remaining
during WB bracketing
Self-timer countdown
Bulb exposure time
AF mode (p.76)
X
One-Shot AF
9
AI Focus AF
Z...

19
Nomenclature
Viewfinder Information
The display will show only the settings currently applied.
Spot metering circle
AF points 
(Superimposed display)
 AE lock/
 AEB in-progress
 Flash-ready 
  Improper FE lock
 warning
 High-speed sync
 (FP flash)
 FE lock/
 FEB in-progress Exposure level indicator
  Exposure compensation amount
 
Flash exposure compensation amount AEB range
Red-eye reduction lamp-on indicator
Electronic level Focus
 confirmation
 light
Focusing screen
Shutter speed
FE lock (FEL)
Busy...

20
Nomenclature
Mode Dial
Turn the Mode Dial while holding down the Mode Dial lock-release 
button at the center.
Basic Zone
All you do is press the shutter 
button. Fully-automatic shooting 
suiting the subject.
1: Full Auto  (p.54)
7 : Flash Off (p.58)
C : Creative Auto  (p.59)
Creative Zone
These modes give you more 
control for shooting various 
subjects.
d
: Program AE (p.112)
s : Shutter-priority AE (p.114)
f : Aperture-priority AE (p.116)
a : Manual exposure (p.118)
F : Bulb (p.123)
Image Zone 2 :...