Panasonic Lcd Tv Tc L39em60 Operating Instructions

							11
9
13 10
14
12 8
15
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are not 
available. Availability depends on the contents you are enjoying.
Watching TV
 Turn 
power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu. 
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel
with the up/down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press  MENU  button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
PictureReset to defaultsResets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,   
Sharpness [Adjusts the color, brightness, etc. 
for each picture mode to suit your 
preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter 
: Minimizes noise 
and cross-color in the picture.
Color matrix  : Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  : Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR  : Reduces picture noise 
in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  : (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Motion picture setting  : (Off/
Weak/Medium/Strong) Improves 
motion picture quality by reducing 
motion blur.
Aspect adjustments  : Screen format (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto : 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 : Digital/AnalogSelect audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff 
: 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All  : Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom  : Locks specified inputs of 
“Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode: (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French ratings
Input HDMI1/HDMI2/Component/
Video 
 Locks external inputs accordingly.Change 
password [Changes the password. Input 
the new 4-digit password twice.]
• This television is designed to support the “Downloadable U.S. 
 
  Region Rating System” when available.(Available only in the U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual ProgramSet Analogue channel manually 
after Automatic Channel Search. 
MTS Stereo/SAP/Mono
Audio LanguageEnglish/Spanish/French
Preferred 
audio type Main audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer : (Off/15/30/60/90 
(minutes))
No signal for 10 minutes 
:
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (
Off/On ) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : ( No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media player allows you to enjoy photos, videos or 
music recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced resolution. zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
AccessVideos
 Select the data [Photos] / [Music] / [Videos]How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.14)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders  
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder 
•   To return to the thumbnail of all photos Select
 OK
[Slideshow settings]
1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Videos view
Supported file format  (p.14)
The thumbnail of all the Videos in the USB Flash 
Memory will be displayed.
OPTION
Title/Folders viewMedia player  Videos
Trip1
Nature2
2010_9 Trip2
Nature3
Trip3
Nature4Trip4
Nature5 Trip5
Nature6Room
2010_4 Nature1
2010_7
USB
EXIT
Select RETURN
Play folder
Drive select
Info
 Access
Video options
Media select
Operation guide
Features
● Play folder   
● Drive select  
● Media select  
● Aspect change  
[Video options]1無 Display the “Video options” screen OPTION
2無 Set the play repeat function to your preference zRepeat (“Off” / “On”)
SelectVi d eo  o p t i o n s
Rep eat Of f
Music play
Supported file format  (p.14)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]
1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]
1無 Display the menu
Supported file format in Media Player
 Photos
Format File extension Image resolution (pixel) Details / Restrictions
JPEG .jpg
.jpegBaseline jpeg:
4 x 4 to 15,360 x 8,640
Progressive jpeg:
4 x 4 to 4,000 x 4,000 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
 zProgressive JPEG is not supported.

 Videos
Container File extension Video codec Audio codecDetails / Restrictions
AVI 
						

							11
9
13 10
14
12 8
15
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are not 
available. Availability depends on the contents you are enjoying.
Watching TV
 Turn 
power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu. 
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel
with the up/down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press  MENU  button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
PictureReset to defaultsResets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,   
Sharpness [Adjusts the color, brightness, etc. 
for each picture mode to suit your 
preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter 
: Minimizes noise 
and cross-color in the picture.
Color matrix  : Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  : Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR  : Reduces picture noise 
in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  : (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Motion picture setting  : (Off/
Weak/Medium/Strong) Improves 
motion picture quality by reducing 
motion blur.
Aspect adjustments  : Screen format (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto : 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 : Digital/AnalogSelect audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff 
: 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All  : Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom  : Locks specified inputs of 
“Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode: (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French ratings
Input HDMI1/HDMI2/Component/
Video 
 Locks external inputs accordingly.Change 
password [Changes the password. Input 
the new 4-digit password twice.]
• This television is designed to support the “Downloadable U.S. 
 
  Region Rating System” when available.(Available only in the U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual ProgramSet Analogue channel manually 
after Automatic Channel Search. 
MTS Stereo/SAP/Mono
Audio LanguageEnglish/Spanish/French
Preferred 
audio type Main audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer : (Off/15/30/60/90 
(minutes))
No signal for 10 minutes 
:
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (
Off/On ) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : ( No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media player allows you to enjoy photos, videos or 
music recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced resolution. zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
AccessVideos
 Select the data [Photos] / [Music] / [Videos]How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.14)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders  
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder 
•   To return to the thumbnail of all photos Select
 OK
[Slideshow settings]
1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Videos view
Supported file format  (p.14)
The thumbnail of all the Videos in the USB Flash 
Memory will be displayed.
OPTION
Title/Folders viewMedia player  Videos
Trip1
Nature2
2010_9 Trip2
Nature3
Trip3
Nature4Trip4
Nature5 Trip5
Nature6Room
2010_4 Nature1
2010_7
USB
EXIT
Select RETURN
Play folder
Drive select
Info
 Access
Video options
Media select
Operation guide
Features
● Play folder   
● Drive select  
● Media select  
● Aspect change  
[Video options]1無 Display the “Video options” screen OPTION
2無 Set the play repeat function to your preference zRepeat (“Off” / “On”)
SelectVi d eo  o p t i o n s
Rep eat Of f
Music play
Supported file format  (p.14)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]
1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]
1無 Display the menu
Supported file format in Media Player
 Photos
Format File extension Image resolution (pixel) Details / Restrictions
JPEG .jpg
.jpegBaseline jpeg:
4 x 4 to 15,360 x 8,640
Progressive jpeg:
4 x 4 to 4,000 x 4,000 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
 zProgressive JPEG is not supported.

 Videos
Container File extension Video codec Audio codecDetails / Restrictions
AVI 
						

							11
9
13 10
14
12 8
15
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are not 
available. Availability depends on the contents you are enjoying.
Watching TV
 Turn 
power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu. 
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel
with the up/down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press  MENU  button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
PictureReset to defaultsResets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,   
Sharpness [Adjusts the color, brightness, etc. 
for each picture mode to suit your 
preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter 
: Minimizes noise 
and cross-color in the picture.
Color matrix  : Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  : Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR  : Reduces picture noise 
in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  : (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Motion picture setting  : (Off/
Weak/Medium/Strong) Improves 
motion picture quality by reducing 
motion blur.
Aspect adjustments  : Screen format (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto : 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 : Digital/AnalogSelect audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff 
: 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All  : Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom  : Locks specified inputs of 
“Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode: (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French ratings
Input HDMI1/HDMI2/Component/
Video 
 Locks external inputs accordingly.Change 
password [Changes the password. Input 
the new 4-digit password twice.]
• This television is designed to support the “Downloadable U.S. 
 
  Region Rating System” when available.(Available only in the U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual ProgramSet Analogue channel manually 
after Automatic Channel Search. 
MTS Stereo/SAP/Mono
Audio LanguageEnglish/Spanish/French
Preferred 
audio type Main audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer : (Off/15/30/60/90 
(minutes))
No signal for 10 minutes 
:
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (
Off/On ) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : ( No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media player allows you to enjoy photos, videos or 
music recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced resolution. zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
AccessVideos
 Select the data [Photos] / [Music] / [Videos]How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.14)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders  
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder 
•   To return to the thumbnail of all photos Select
 OK
[Slideshow settings]
1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Videos view
Supported file format  (p.14)
The thumbnail of all the Videos in the USB Flash 
Memory will be displayed.
OPTION
Title/Folders viewMedia player  Videos
Trip1
Nature2
2010_9 Trip2
Nature3
Trip3
Nature4Trip4
Nature5 Trip5
Nature6Room
2010_4 Nature1
2010_7
USB
EXIT
Select RETURN
Play folder
Drive select
Info
 Access
Video options
Media select
Operation guide
Features
● Play folder   
● Drive select  
● Media select  
● Aspect change  
[Video options]1無 Display the “Video options” screen OPTION
2無 Set the play repeat function to your preference zRepeat (“Off” / “On”)
SelectVi d eo  o p t i o n s
Rep eat Of f
Music play
Supported file format  (p.14)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]
1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]
1無 Display the menu
Supported file format in Media Player
 Photos
Format File extension Image resolution (pixel) Details / Restrictions
JPEG .jpg
.jpegBaseline jpeg:
4 x 4 to 15,360 x 8,640
Progressive jpeg:
4 x 4 to 4,000 x 4,000 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
 zProgressive JPEG is not supported.

 Videos
Container File extension Video codec Audio codecDetails / Restrictions
AVI 
						

							11
9
13 10
14
12 8
15
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are not 
available. Availability depends on the contents you are enjoying.
Watching TV
 Turn 
power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu. 
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel
with the up/down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press  MENU  button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
PictureReset to defaultsResets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,   
Sharpness [Adjusts the color, brightness, etc. 
for each picture mode to suit your 
preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter 
: Minimizes noise 
and cross-color in the picture.
Color matrix  : Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  : Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR  : Reduces picture noise 
in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  : (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Motion picture setting  : (Off/
Weak/Medium/Strong) Improves 
motion picture quality by reducing 
motion blur.
Aspect adjustments  : Screen format (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto : 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 : Digital/AnalogSelect audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff 
: 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All  : Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom  : Locks specified inputs of 
“Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode: (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French ratings
Input HDMI1/HDMI2/Component/
Video 
 Locks external inputs accordingly.Change 
password [Changes the password. Input 
the new 4-digit password twice.]
• This television is designed to support the “Downloadable U.S. 
 
  Region Rating System” when available.(Available only in the U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual ProgramSet Analogue channel manually 
after Automatic Channel Search. 
MTS Stereo/SAP/Mono
Audio LanguageEnglish/Spanish/French
Preferred 
audio type Main audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer : (Off/15/30/60/90 
(minutes))
No signal for 10 minutes 
:
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (
Off/On ) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : ( No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media player allows you to enjoy photos, videos or 
music recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced resolution. zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
AccessVideos
 Select the data [Photos] / [Music] / [Videos]How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.14)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders  
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder 
•   To return to the thumbnail of all photos Select
 OK
[Slideshow settings]
1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Videos view
Supported file format  (p.14)
The thumbnail of all the Videos in the USB Flash 
Memory will be displayed.
OPTION
Title/Folders viewMedia player  Videos
Trip1
Nature2
2010_9 Trip2
Nature3
Trip3
Nature4Trip4
Nature5 Trip5
Nature6Room
2010_4 Nature1
2010_7
USB
EXIT
Select RETURN
Play folder
Drive select
Info
 Access
Video options
Media select
Operation guide
Features
● Play folder   
● Drive select  
● Media select  
● Aspect change  
[Video options]1無 Display the “Video options” screen OPTION
2無 Set the play repeat function to your preference zRepeat (“Off” / “On”)
SelectVi d eo  o p t i o n s
Rep eat Of f
Music play
Supported file format  (p.14)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]
1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]
1無 Display the menu
Supported file format in Media Player
 Photos
Format File extension Image resolution (pixel) Details / Restrictions
JPEG .jpg
.jpegBaseline jpeg:
4 x 4 to 15,360 x 8,640
Progressive jpeg:
4 x 4 to 4,000 x 4,000 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
 zProgressive JPEG is not supported.

 Videos
Container File extension Video codec Audio codecDetails / Restrictions
AVI 
						

							11
9
13 10
14
12 8
15
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are not 
available. Availability depends on the contents you are enjoying.
Watching TV
 Turn 
power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu. 
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel
with the up/down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press  MENU  button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
PictureReset to defaultsResets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,   
Sharpness [Adjusts the color, brightness, etc. 
for each picture mode to suit your 
preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter 
: Minimizes noise 
and cross-color in the picture.
Color matrix  : Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  : Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR  : Reduces picture noise 
in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  : (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Motion picture setting  : (Off/
Weak/Medium/Strong) Improves 
motion picture quality by reducing 
motion blur.
Aspect adjustments  : Screen format (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto : 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 : Digital/AnalogSelect audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff 
: 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All  : Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom  : Locks specified inputs of 
“Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode: (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French ratings
Input HDMI1/HDMI2/Component/
Video 
 Locks external inputs accordingly.Change 
password [Changes the password. Input 
the new 4-digit password twice.]
• This television is designed to support the “Downloadable U.S. 
 
  Region Rating System” when available.(Available only in the U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual ProgramSet Analogue channel manually 
after Automatic Channel Search. 
MTS Stereo/SAP/Mono
Audio LanguageEnglish/Spanish/French
Preferred 
audio type Main audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer : (Off/15/30/60/90 
(minutes))
No signal for 10 minutes 
:
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (
Off/On ) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : ( No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media player allows you to enjoy photos, videos or 
music recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced resolution. zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
AccessVideos
 Select the data [Photos] / [Music] / [Videos]How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.14)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders  
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder 
•   To return to the thumbnail of all photos Select
 OK
[Slideshow settings]
1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Videos view
Supported file format  (p.14)
The thumbnail of all the Videos in the USB Flash 
Memory will be displayed.
OPTION
Title/Folders viewMedia player  Videos
Trip1
Nature2
2010_9 Trip2
Nature3
Trip3
Nature4Trip4
Nature5 Trip5
Nature6Room
2010_4 Nature1
2010_7
USB
EXIT
Select RETURN
Play folder
Drive select
Info
 Access
Video options
Media select
Operation guide
Features
● Play folder   
● Drive select  
● Media select  
● Aspect change  
[Video options]1無 Display the “Video options” screen OPTION
2無 Set the play repeat function to your preference zRepeat (“Off” / “On”)
SelectVi d eo  o p t i o n s
Rep eat Of f
Music play
Supported file format  (p.14)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]
1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]
1無 Display the menu
Supported file format in Media Player
 Photos
Format File extension Image resolution (pixel) Details / Restrictions
JPEG .jpg
.jpegBaseline jpeg:
4 x 4 to 15,360 x 8,640
Progressive jpeg:
4 x 4 to 4,000 x 4,000 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
 zProgressive JPEG is not supported.

 Videos
Container File extension Video codec Audio codecDetails / Restrictions
AVI 
						

							11
9
13 10
14
12 8
15
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are not 
available. Availability depends on the contents you are enjoying.
Watching TV
 Turn 
power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu. 
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel
with the up/down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press  MENU  button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
PictureReset to defaultsResets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,   
Sharpness [Adjusts the color, brightness, etc. 
for each picture mode to suit your 
preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter 
: Minimizes noise 
and cross-color in the picture.
Color matrix  : Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  : Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR  : Reduces picture noise 
in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  : (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Motion picture setting  : (Off/
Weak/Medium/Strong) Improves 
motion picture quality by reducing 
motion blur.
Aspect adjustments  : Screen format (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto : 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 : Digital/AnalogSelect audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff 
: 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All  : Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom  : Locks specified inputs of 
“Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode: (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French ratings
Input HDMI1/HDMI2/Component/
Video 
 Locks external inputs accordingly.Change 
password [Changes the password. Input 
the new 4-digit password twice.]
• This television is designed to support the “Downloadable U.S. 
 
  Region Rating System” when available.(Available only in the U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual ProgramSet Analogue channel manually 
after Automatic Channel Search. 
MTS Stereo/SAP/Mono
Audio LanguageEnglish/Spanish/French
Preferred 
audio type Main audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer : (Off/15/30/60/90 
(minutes))
No signal for 10 minutes 
:
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (
Off/On ) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : ( No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media player allows you to enjoy photos, videos or 
music recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced resolution. zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
AccessVideos
 Select the data [Photos] / [Music] / [Videos]How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.14)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders  
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder 
•   To return to the thumbnail of all photos Select
 OK
[Slideshow settings]
1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Videos view
Supported file format  (p.14)
The thumbnail of all the Videos in the USB Flash 
Memory will be displayed.
OPTION
Title/Folders viewMedia player  Videos
Trip1
Nature2
2010_9 Trip2
Nature3
Trip3
Nature4Trip4
Nature5 Trip5
Nature6Room
2010_4 Nature1
2010_7
USB
EXIT
Select RETURN
Play folder
Drive select
Info
 Access
Video options
Media select
Operation guide
Features
● Play folder   
● Drive select  
● Media select  
● Aspect change  
[Video options]1無 Display the “Video options” screen OPTION
2無 Set the play repeat function to your preference zRepeat (“Off” / “On”)
SelectVi d eo  o p t i o n s
Rep eat Of f
Music play
Supported file format  (p.14)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]
1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]
1無 Display the menu
Supported file format in Media Player
 Photos
Format File extension Image resolution (pixel) Details / Restrictions
JPEG .jpg
.jpegBaseline jpeg:
4 x 4 to 15,360 x 8,640
Progressive jpeg:
4 x 4 to 4,000 x 4,000 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
 zProgressive JPEG is not supported.

 Videos
Container File extension Video codec Audio codecDetails / Restrictions
AVI