Panasonic Lcd Tv Tc L32xm6 Operating Instructions

							11
9
13 10
14
12 8
15
Customer’s RecordThe model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model NumberSerial Number
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
M0212-0
© 2013 Panasonic Corporation of North America. All Rights Reserved. Printed in China
Accessory Purchases  
(United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line 
for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com  
or, send your request by E-mail to:  
[email protected] 
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday 
- Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Ave. S., Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, and American 
Express)
 For hearing or speech impaired TTY users, TTY: 1-866-
605-1277
Watching TV
 Turn  power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel with the up/
down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press MENU button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
Picture
 Reset to defaults
Resets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,  
Sharpness [Adjusts the color, brightness, 
etc. for each picture mode to 
suit your preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter :
 Minimizes noise 
and cross-color in the picture.
Color matrix :  Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  :  Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR :  Reduces picture 
noise in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  :  (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Aspect adjustments  :  Screen format  (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto :
 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 :  
(Digital/Analog )
Select audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff : 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All :  Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom :  Locks specified inputs 
of “Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode : (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French 
ratings
Input HDMI1/HDMI2/Component/
Video 
 
Locks external inputs accordingly.
Change 
password [Changes the password. Input 
the new 4-digit password 
twice.]
• This television is designed to support the “Downloadable U.S.   
  Region Rating System” when available.(Available only in the    
  U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual 
Program Set Analogue channel manually 
after Automatic Channel Search.
MTS Stereo/SAP/Mono
 
Selects the Audio mode for watching TVAudio 
LanguageEnglish/Spanish/French
 Selects the language for TV programs
Preferred 
audio typeMain audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer :
 (Off/15/30/60/90 
(minutes))
No signal for 10 minutes  :
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (Off/On
) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : (No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media Player allows you to enjoy photo or music 
recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced 
resolution.
 zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
Access
 Select the data [Photos] / [Music]
How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.13)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders 
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder
•  To return to the thumbnail of all photos Select
 OK
[Slideshow settings]1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Music play
Supported file format  (p.13)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]1無 Display the menu
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are 
not available. Availability depends on the contents you are 
enjoying.
Supported file format in Media 
Player
 Photos
Format File extension
JPEG .jpg
.jpeg
Image resolution  (pixel) Details / Restrictions
4 × 4 to
15,360 × 8,640 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
● Progressive JPEG is not supported.

 Music
Codec File extension
MP3 .mp3
Restrictions
Bit rate support● 32/40/48/56/64/80/96/112/128/160/192/224/256/320   
    kbits/s
● VBR no support
Note: 
 zSome files may not be played back even if they fulfill these 
conditions.
 zDo not use two-byte characters or other special codes for data. zThe device may become unusable with this TV if the file or folder 
names are changed.
 zThe picture may not appear correctly on this TV depending on 
the recording equipment used. 
 zDisplay may take some time when there are many files and 
folders. 
 zThe function cannot display Motion JPEG and still image not 
DCF formatted (i.e. TIFF, BMP). 
 zData modified with a PC may not be displayed.  zImages imported from a PC must be compatible with EXIF 2.0, 2.1 
and 2.2. 
 zPartly degraded files might be displayed at a reduced resolution.  zAll “.JPG” extension data in the USB flash memory will be read 
in Photo viewer Mode. 
 zThe folder and file names may be different depending on the 
digital camera used. 
Specifications
Power rating AC 110-127 V, 60 Hz
Rated Power Consumption
32” : 56 
Watts 
Standby condition32” : 0.3 
Watts 
Visible screen size (diagonal)32” class : 31.5 inch (80cm)
Number of pixels
32” HD (1366X768) 
 
Dimensions (W × H × D)   (Including Stand)
32” : 29.2” × 20.2” × 8.2” (741 mm × 513 mm × 207 mm)
Net Weight 
32” : 17.6Ib. (8 kg)  (Including Stand)
32” : 15.4Ib. (7 kg)  (TV only)
Sound System
 1-way 2 bottom SP System
Channel Capability-ATSC/NTSC (Digital/Analog)
VHF/UHF: 2 - 69, CATV: 1 - 135  
Sound Output
32” : 5W+5W 
Maximum Visible Range
32” : 27.6” × 15.6” (701 mm x 396 mm)
Operating Conditions
Temperature: 32° F - 95° F( 0°C to 35°C)
Humidity: 20 % - 80 % RH (non-condensing)
• Specifications are subject to change without notice.• The On-Screen Menu and figures in this manual may differ  slightly from the product.
• USB Flash Memory format : FAT16, FAT32 (no support 
exFAT or NTFS).• Some USB devices (USB HUB or card adapter) or some USB  stick may not be used with this TV.
Limited Warranty (for U.S.A. and Puerto Rico only)
Panasonic Consumer Marketing Company of North America:  
PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094
Panasonic LCD Televisions  Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North 
America. (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original 
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished 
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.
LCD TV CATEGORIES PARTSLABORSERVICEUp to 42” (diagonal)
1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-
in your product or arrange for on-site service during the Limited warranty period. If non-rechargeable batteries are included, they are not warranted. This 
Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372)
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include removal or 
re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of 
the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or 
cosmetic damage, nor does it cover markings or retained images on the LCD panel resulting from viewing fixed images (including, among other 
things, non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO 
DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures 
which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, 
misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE 
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages 
for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The 
items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how long an 
implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights 
and you may also have others rights which vary from state to state.If a \
problem with this product develops during or after the 
Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, 
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT 
COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L 4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period 
as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, 
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or 
refund will be made by Panasonic Canada Inc.
Viera TV (46” & over)In-home service One (1) year, parts (including panel) and labour.
Viera TV (under 46”) Carry-in service One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include removal or   
re-installation of an installed product. If removal is required to service the product, it will be at the discretion of the Servicer and in no 
Customer Services Directory   
(for U.S.A. and Puerto Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature 
requests by visiting our Web Site at:
http://www.panasonic.com/help  
or, contact us via the web at: 
http://www.panasonic .com/contactinfo
You may also contact us directly at:  
1-877-95-VIERA (958-4372)  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, 
EST.
 For hearing or speech impai red TTY users, TTY: 1-877-
833-8855
event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product 
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by 
Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of 
sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other 
than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. 
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR 
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, 
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not 
exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other 
rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance , please contact: 
Our Customer Care Centre: 1-800 #: 1-866-330-0014or visit our website:   concierge.panasonic. ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of  the defect claimed, and proof of date of original purchase. 
						

							11
9
13 10
14
12 8
15
Customer’s RecordThe model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model NumberSerial Number
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
M0212-0
© 2013 Panasonic Corporation of North America. All Rights Reserved. Printed in China
Accessory Purchases  
(United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line 
for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com  
or, send your request by E-mail to:  
[email protected] 
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday 
- Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Ave. S., Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, and American 
Express)
 For hearing or speech impaired TTY users, TTY: 1-866-
605-1277
Watching TV
 Turn  power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel with the up/
down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press MENU button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
Picture
 Reset to defaults
Resets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,  
Sharpness [Adjusts the color, brightness, 
etc. for each picture mode to 
suit your preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter :
 Minimizes noise 
and cross-color in the picture.
Color matrix :  Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  :  Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR :  Reduces picture 
noise in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  :  (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Aspect adjustments  :  Screen format  (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto :
 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 :  
(Digital/Analog )
Select audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff : 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All :  Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom :  Locks specified inputs 
of “Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode : (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French 
ratings
Input HDMI1/HDMI2/Component/
Video 
 
Locks external inputs accordingly.
Change 
password [Changes the password. Input 
the new 4-digit password 
twice.]
• This television is designed to support the “Downloadable U.S.   
  Region Rating System” when available.(Available only in the    
  U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual 
Program Set Analogue channel manually 
after Automatic Channel Search.
MTS Stereo/SAP/Mono
 
Selects the Audio mode for watching TVAudio 
LanguageEnglish/Spanish/French
 Selects the language for TV programs
Preferred 
audio typeMain audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer :
 (Off/15/30/60/90 
(minutes))
No signal for 10 minutes  :
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (Off/On
) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : (No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media Player allows you to enjoy photo or music 
recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced 
resolution.
 zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
Access
 Select the data [Photos] / [Music]
How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.13)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders 
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder
•  To return to the thumbnail of all photos Select
 OK
[Slideshow settings]1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Music play
Supported file format  (p.13)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]1無 Display the menu
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are 
not available. Availability depends on the contents you are 
enjoying.
Supported file format in Media 
Player
 Photos
Format File extension
JPEG .jpg
.jpeg
Image resolution  (pixel) Details / Restrictions
4 × 4 to
15,360 × 8,640 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
● Progressive JPEG is not supported.

 Music
Codec File extension
MP3 .mp3
Restrictions
Bit rate support● 32/40/48/56/64/80/96/112/128/160/192/224/256/320   
    kbits/s
● VBR no support
Note: 
 zSome files may not be played back even if they fulfill these 
conditions.
 zDo not use two-byte characters or other special codes for data. zThe device may become unusable with this TV if the file or folder 
names are changed.
 zThe picture may not appear correctly on this TV depending on 
the recording equipment used. 
 zDisplay may take some time when there are many files and 
folders. 
 zThe function cannot display Motion JPEG and still image not 
DCF formatted (i.e. TIFF, BMP). 
 zData modified with a PC may not be displayed.  zImages imported from a PC must be compatible with EXIF 2.0, 2.1 
and 2.2. 
 zPartly degraded files might be displayed at a reduced resolution.  zAll “.JPG” extension data in the USB flash memory will be read 
in Photo viewer Mode. 
 zThe folder and file names may be different depending on the 
digital camera used. 
Specifications
Power rating AC 110-127 V, 60 Hz
Rated Power Consumption
32” : 56 
Watts 
Standby condition32” : 0.3 
Watts 
Visible screen size (diagonal)32” class : 31.5 inch (80cm)
Number of pixels
32” HD (1366X768) 
 
Dimensions (W × H × D)   (Including Stand)
32” : 29.2” × 20.2” × 8.2” (741 mm × 513 mm × 207 mm)
Net Weight 
32” : 17.6Ib. (8 kg)  (Including Stand)
32” : 15.4Ib. (7 kg)  (TV only)
Sound System
 1-way 2 bottom SP System
Channel Capability-ATSC/NTSC (Digital/Analog)
VHF/UHF: 2 - 69, CATV: 1 - 135  
Sound Output
32” : 5W+5W 
Maximum Visible Range
32” : 27.6” × 15.6” (701 mm x 396 mm)
Operating Conditions
Temperature: 32° F - 95° F( 0°C to 35°C)
Humidity: 20 % - 80 % RH (non-condensing)
• Specifications are subject to change without notice.• The On-Screen Menu and figures in this manual may differ  slightly from the product.
• USB Flash Memory format : FAT16, FAT32 (no support 
exFAT or NTFS).• Some USB devices (USB HUB or card adapter) or some USB  stick may not be used with this TV.
Limited Warranty (for U.S.A. and Puerto Rico only)
Panasonic Consumer Marketing Company of North America:  
PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094
Panasonic LCD Televisions  Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North 
America. (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original 
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished 
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.
LCD TV CATEGORIES PARTSLABORSERVICEUp to 42” (diagonal)
1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-
in your product or arrange for on-site service during the Limited warranty period. If non-rechargeable batteries are included, they are not warranted. This 
Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372)
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include removal or 
re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of 
the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or 
cosmetic damage, nor does it cover markings or retained images on the LCD panel resulting from viewing fixed images (including, among other 
things, non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO 
DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures 
which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, 
misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE 
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages 
for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The 
items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how long an 
implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights 
and you may also have others rights which vary from state to state.If a \
problem with this product develops during or after the 
Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, 
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT 
COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L 4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period 
as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, 
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or 
refund will be made by Panasonic Canada Inc.
Viera TV (46” & over)In-home service One (1) year, parts (including panel) and labour.
Viera TV (under 46”) Carry-in service One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include removal or   
re-installation of an installed product. If removal is required to service the product, it will be at the discretion of the Servicer and in no 
Customer Services Directory   
(for U.S.A. and Puerto Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature 
requests by visiting our Web Site at:
http://www.panasonic.com/help  
or, contact us via the web at: 
http://www.panasonic .com/contactinfo
You may also contact us directly at:  
1-877-95-VIERA (958-4372)  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, 
EST.
 For hearing or speech impai red TTY users, TTY: 1-877-
833-8855
event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product 
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by 
Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of 
sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other 
than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. 
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR 
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, 
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not 
exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other 
rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance , please contact: 
Our Customer Care Centre: 1-800 #: 1-866-330-0014or visit our website:   concierge.panasonic. ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of  the defect claimed, and proof of date of original purchase. 
						

							11
9
13 10
14
12 8
15
Customer’s RecordThe model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model NumberSerial Number
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
M0212-0
© 2013 Panasonic Corporation of North America. All Rights Reserved. Printed in China
Accessory Purchases  
(United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line 
for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com  
or, send your request by E-mail to:  
[email protected] 
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday 
- Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Ave. S., Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, and American 
Express)
 For hearing or speech impaired TTY users, TTY: 1-866-
605-1277
Watching TV
 Turn  power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel with the up/
down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press MENU button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
Picture
 Reset to defaults
Resets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,  
Sharpness [Adjusts the color, brightness, 
etc. for each picture mode to 
suit your preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter :
 Minimizes noise 
and cross-color in the picture.
Color matrix :  Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  :  Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR :  Reduces picture 
noise in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  :  (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Aspect adjustments  :  Screen format  (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto :
 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 :  
(Digital/Analog )
Select audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff : 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All :  Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom :  Locks specified inputs 
of “Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode : (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French 
ratings
Input HDMI1/HDMI2/Component/
Video 
 
Locks external inputs accordingly.
Change 
password [Changes the password. Input 
the new 4-digit password 
twice.]
• This television is designed to support the “Downloadable U.S.   
  Region Rating System” when available.(Available only in the    
  U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual 
Program Set Analogue channel manually 
after Automatic Channel Search.
MTS Stereo/SAP/Mono
 
Selects the Audio mode for watching TVAudio 
LanguageEnglish/Spanish/French
 Selects the language for TV programs
Preferred 
audio typeMain audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer :
 (Off/15/30/60/90 
(minutes))
No signal for 10 minutes  :
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (Off/On
) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : (No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media Player allows you to enjoy photo or music 
recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced 
resolution.
 zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
Access
 Select the data [Photos] / [Music]
How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.13)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders 
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder
•  To return to the thumbnail of all photos Select
 OK
[Slideshow settings]1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Music play
Supported file format  (p.13)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]1無 Display the menu
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are 
not available. Availability depends on the contents you are 
enjoying.
Supported file format in Media 
Player
 Photos
Format File extension
JPEG .jpg
.jpeg
Image resolution  (pixel) Details / Restrictions
4 × 4 to
15,360 × 8,640 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
● Progressive JPEG is not supported.

 Music
Codec File extension
MP3 .mp3
Restrictions
Bit rate support● 32/40/48/56/64/80/96/112/128/160/192/224/256/320   
    kbits/s
● VBR no support
Note: 
 zSome files may not be played back even if they fulfill these 
conditions.
 zDo not use two-byte characters or other special codes for data. zThe device may become unusable with this TV if the file or folder 
names are changed.
 zThe picture may not appear correctly on this TV depending on 
the recording equipment used. 
 zDisplay may take some time when there are many files and 
folders. 
 zThe function cannot display Motion JPEG and still image not 
DCF formatted (i.e. TIFF, BMP). 
 zData modified with a PC may not be displayed.  zImages imported from a PC must be compatible with EXIF 2.0, 2.1 
and 2.2. 
 zPartly degraded files might be displayed at a reduced resolution.  zAll “.JPG” extension data in the USB flash memory will be read 
in Photo viewer Mode. 
 zThe folder and file names may be different depending on the 
digital camera used. 
Specifications
Power rating AC 110-127 V, 60 Hz
Rated Power Consumption
32” : 56 
Watts 
Standby condition32” : 0.3 
Watts 
Visible screen size (diagonal)32” class : 31.5 inch (80cm)
Number of pixels
32” HD (1366X768) 
 
Dimensions (W × H × D)   (Including Stand)
32” : 29.2” × 20.2” × 8.2” (741 mm × 513 mm × 207 mm)
Net Weight 
32” : 17.6Ib. (8 kg)  (Including Stand)
32” : 15.4Ib. (7 kg)  (TV only)
Sound System
 1-way 2 bottom SP System
Channel Capability-ATSC/NTSC (Digital/Analog)
VHF/UHF: 2 - 69, CATV: 1 - 135  
Sound Output
32” : 5W+5W 
Maximum Visible Range
32” : 27.6” × 15.6” (701 mm x 396 mm)
Operating Conditions
Temperature: 32° F - 95° F( 0°C to 35°C)
Humidity: 20 % - 80 % RH (non-condensing)
• Specifications are subject to change without notice.• The On-Screen Menu and figures in this manual may differ  slightly from the product.
• USB Flash Memory format : FAT16, FAT32 (no support 
exFAT or NTFS).• Some USB devices (USB HUB or card adapter) or some USB  stick may not be used with this TV.
Limited Warranty (for U.S.A. and Puerto Rico only)
Panasonic Consumer Marketing Company of North America:  
PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094
Panasonic LCD Televisions  Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North 
America. (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original 
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished 
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.
LCD TV CATEGORIES PARTSLABORSERVICEUp to 42” (diagonal)
1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-
in your product or arrange for on-site service during the Limited warranty period. If non-rechargeable batteries are included, they are not warranted. This 
Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372)
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include removal or 
re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of 
the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or 
cosmetic damage, nor does it cover markings or retained images on the LCD panel resulting from viewing fixed images (including, among other 
things, non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO 
DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures 
which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, 
misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE 
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages 
for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The 
items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how long an 
implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights 
and you may also have others rights which vary from state to state.If a \
problem with this product develops during or after the 
Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, 
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT 
COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L 4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period 
as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, 
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or 
refund will be made by Panasonic Canada Inc.
Viera TV (46” & over)In-home service One (1) year, parts (including panel) and labour.
Viera TV (under 46”) Carry-in service One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include removal or   
re-installation of an installed product. If removal is required to service the product, it will be at the discretion of the Servicer and in no 
Customer Services Directory   
(for U.S.A. and Puerto Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature 
requests by visiting our Web Site at:
http://www.panasonic.com/help  
or, contact us via the web at: 
http://www.panasonic .com/contactinfo
You may also contact us directly at:  
1-877-95-VIERA (958-4372)  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, 
EST.
 For hearing or speech impai red TTY users, TTY: 1-877-
833-8855
event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product 
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by 
Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of 
sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other 
than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. 
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR 
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, 
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not 
exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other 
rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance , please contact: 
Our Customer Care Centre: 1-800 #: 1-866-330-0014or visit our website:   concierge.panasonic. ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of  the defect claimed, and proof of date of original purchase. 
						

							11
9
13 10
14
12 8
15
Customer’s RecordThe model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model NumberSerial Number
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
M0212-0
© 2013 Panasonic Corporation of North America. All Rights Reserved. Printed in China
Accessory Purchases  
(United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line 
for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com  
or, send your request by E-mail to:  
[email protected] 
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday 
- Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Ave. S., Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, and American 
Express)
 For hearing or speech impaired TTY users, TTY: 1-866-
605-1277
Watching TV
 Turn  power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel with the up/
down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press MENU button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
Picture
 Reset to defaults
Resets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,  
Sharpness [Adjusts the color, brightness, 
etc. for each picture mode to 
suit your preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter :
 Minimizes noise 
and cross-color in the picture.
Color matrix :  Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  :  Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR :  Reduces picture 
noise in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  :  (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Aspect adjustments  :  Screen format  (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto :
 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 :  
(Digital/Analog )
Select audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff : 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All :  Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom :  Locks specified inputs 
of “Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode : (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French 
ratings
Input HDMI1/HDMI2/Component/
Video 
 
Locks external inputs accordingly.
Change 
password [Changes the password. Input 
the new 4-digit password 
twice.]
• This television is designed to support the “Downloadable U.S.   
  Region Rating System” when available.(Available only in the    
  U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual 
Program Set Analogue channel manually 
after Automatic Channel Search.
MTS Stereo/SAP/Mono
 
Selects the Audio mode for watching TVAudio 
LanguageEnglish/Spanish/French
 Selects the language for TV programs
Preferred 
audio typeMain audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer :
 (Off/15/30/60/90 
(minutes))
No signal for 10 minutes  :
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (Off/On
) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : (No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media Player allows you to enjoy photo or music 
recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced 
resolution.
 zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
Access
 Select the data [Photos] / [Music]
How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.13)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders 
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder
•  To return to the thumbnail of all photos Select
 OK
[Slideshow settings]1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Music play
Supported file format  (p.13)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]1無 Display the menu
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are 
not available. Availability depends on the contents you are 
enjoying.
Supported file format in Media 
Player
 Photos
Format File extension
JPEG .jpg
.jpeg
Image resolution  (pixel) Details / Restrictions
4 × 4 to
15,360 × 8,640 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
● Progressive JPEG is not supported.

 Music
Codec File extension
MP3 .mp3
Restrictions
Bit rate support● 32/40/48/56/64/80/96/112/128/160/192/224/256/320   
    kbits/s
● VBR no support
Note: 
 zSome files may not be played back even if they fulfill these 
conditions.
 zDo not use two-byte characters or other special codes for data. zThe device may become unusable with this TV if the file or folder 
names are changed.
 zThe picture may not appear correctly on this TV depending on 
the recording equipment used. 
 zDisplay may take some time when there are many files and 
folders. 
 zThe function cannot display Motion JPEG and still image not 
DCF formatted (i.e. TIFF, BMP). 
 zData modified with a PC may not be displayed.  zImages imported from a PC must be compatible with EXIF 2.0, 2.1 
and 2.2. 
 zPartly degraded files might be displayed at a reduced resolution.  zAll “.JPG” extension data in the USB flash memory will be read 
in Photo viewer Mode. 
 zThe folder and file names may be different depending on the 
digital camera used. 
Specifications
Power rating AC 110-127 V, 60 Hz
Rated Power Consumption
32” : 56 
Watts 
Standby condition32” : 0.3 
Watts 
Visible screen size (diagonal)32” class : 31.5 inch (80cm)
Number of pixels
32” HD (1366X768) 
 
Dimensions (W × H × D)   (Including Stand)
32” : 29.2” × 20.2” × 8.2” (741 mm × 513 mm × 207 mm)
Net Weight 
32” : 17.6Ib. (8 kg)  (Including Stand)
32” : 15.4Ib. (7 kg)  (TV only)
Sound System
 1-way 2 bottom SP System
Channel Capability-ATSC/NTSC (Digital/Analog)
VHF/UHF: 2 - 69, CATV: 1 - 135  
Sound Output
32” : 5W+5W 
Maximum Visible Range
32” : 27.6” × 15.6” (701 mm x 396 mm)
Operating Conditions
Temperature: 32° F - 95° F( 0°C to 35°C)
Humidity: 20 % - 80 % RH (non-condensing)
• Specifications are subject to change without notice.• The On-Screen Menu and figures in this manual may differ  slightly from the product.
• USB Flash Memory format : FAT16, FAT32 (no support 
exFAT or NTFS).• Some USB devices (USB HUB or card adapter) or some USB  stick may not be used with this TV.
Limited Warranty (for U.S.A. and Puerto Rico only)
Panasonic Consumer Marketing Company of North America:  
PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094
Panasonic LCD Televisions  Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North 
America. (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original 
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished 
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.
LCD TV CATEGORIES PARTSLABORSERVICEUp to 42” (diagonal)
1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-
in your product or arrange for on-site service during the Limited warranty period. If non-rechargeable batteries are included, they are not warranted. This 
Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372)
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include removal or 
re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of 
the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or 
cosmetic damage, nor does it cover markings or retained images on the LCD panel resulting from viewing fixed images (including, among other 
things, non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO 
DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures 
which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, 
misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE 
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages 
for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The 
items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how long an 
implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights 
and you may also have others rights which vary from state to state.If a \
problem with this product develops during or after the 
Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, 
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT 
COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L 4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period 
as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, 
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or 
refund will be made by Panasonic Canada Inc.
Viera TV (46” & over)In-home service One (1) year, parts (including panel) and labour.
Viera TV (under 46”) Carry-in service One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include removal or   
re-installation of an installed product. If removal is required to service the product, it will be at the discretion of the Servicer and in no 
Customer Services Directory   
(for U.S.A. and Puerto Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature 
requests by visiting our Web Site at:
http://www.panasonic.com/help  
or, contact us via the web at: 
http://www.panasonic .com/contactinfo
You may also contact us directly at:  
1-877-95-VIERA (958-4372)  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, 
EST.
 For hearing or speech impai red TTY users, TTY: 1-877-
833-8855
event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product 
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by 
Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of 
sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other 
than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. 
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR 
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, 
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not 
exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other 
rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance , please contact: 
Our Customer Care Centre: 1-800 #: 1-866-330-0014or visit our website:   concierge.panasonic. ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of  the defect claimed, and proof of date of original purchase. 
						

							11
9
13 10
14
12 8
15
Customer’s RecordThe model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model NumberSerial Number
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
M0212-0
© 2013 Panasonic Corporation of North America. All Rights Reserved. Printed in China
Accessory Purchases  
(United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line 
for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com  
or, send your request by E-mail to:  
[email protected] 
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday 
- Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Ave. S., Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, and American 
Express)
 For hearing or speech impaired TTY users, TTY: 1-866-
605-1277
Watching TV
 Turn  power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel with the up/
down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press MENU button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
Picture
 Reset to defaults
Resets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,  
Sharpness [Adjusts the color, brightness, 
etc. for each picture mode to 
suit your preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter :
 Minimizes noise 
and cross-color in the picture.
Color matrix :  Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  :  Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR :  Reduces picture 
noise in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  :  (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Aspect adjustments  :  Screen format  (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto :
 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 :  
(Digital/Analog )
Select audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff : 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All :  Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom :  Locks specified inputs 
of “Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode : (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French 
ratings
Input HDMI1/HDMI2/Component/
Video 
 
Locks external inputs accordingly.
Change 
password [Changes the password. Input 
the new 4-digit password 
twice.]
• This television is designed to support the “Downloadable U.S.   
  Region Rating System” when available.(Available only in the    
  U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual 
Program Set Analogue channel manually 
after Automatic Channel Search.
MTS Stereo/SAP/Mono
 
Selects the Audio mode for watching TVAudio 
LanguageEnglish/Spanish/French
 Selects the language for TV programs
Preferred 
audio typeMain audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer :
 (Off/15/30/60/90 
(minutes))
No signal for 10 minutes  :
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (Off/On
) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : (No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media Player allows you to enjoy photo or music 
recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced 
resolution.
 zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
Access
 Select the data [Photos] / [Music]
How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.13)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders 
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder
•  To return to the thumbnail of all photos Select
 OK
[Slideshow settings]1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Music play
Supported file format  (p.13)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]1無 Display the menu
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are 
not available. Availability depends on the contents you are 
enjoying.
Supported file format in Media 
Player
 Photos
Format File extension
JPEG .jpg
.jpeg
Image resolution  (pixel) Details / Restrictions
4 × 4 to
15,360 × 8,640 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
● Progressive JPEG is not supported.

 Music
Codec File extension
MP3 .mp3
Restrictions
Bit rate support● 32/40/48/56/64/80/96/112/128/160/192/224/256/320   
    kbits/s
● VBR no support
Note: 
 zSome files may not be played back even if they fulfill these 
conditions.
 zDo not use two-byte characters or other special codes for data. zThe device may become unusable with this TV if the file or folder 
names are changed.
 zThe picture may not appear correctly on this TV depending on 
the recording equipment used. 
 zDisplay may take some time when there are many files and 
folders. 
 zThe function cannot display Motion JPEG and still image not 
DCF formatted (i.e. TIFF, BMP). 
 zData modified with a PC may not be displayed.  zImages imported from a PC must be compatible with EXIF 2.0, 2.1 
and 2.2. 
 zPartly degraded files might be displayed at a reduced resolution.  zAll “.JPG” extension data in the USB flash memory will be read 
in Photo viewer Mode. 
 zThe folder and file names may be different depending on the 
digital camera used. 
Specifications
Power rating AC 110-127 V, 60 Hz
Rated Power Consumption
32” : 56 
Watts 
Standby condition32” : 0.3 
Watts 
Visible screen size (diagonal)32” class : 31.5 inch (80cm)
Number of pixels
32” HD (1366X768) 
 
Dimensions (W × H × D)   (Including Stand)
32” : 29.2” × 20.2” × 8.2” (741 mm × 513 mm × 207 mm)
Net Weight 
32” : 17.6Ib. (8 kg)  (Including Stand)
32” : 15.4Ib. (7 kg)  (TV only)
Sound System
 1-way 2 bottom SP System
Channel Capability-ATSC/NTSC (Digital/Analog)
VHF/UHF: 2 - 69, CATV: 1 - 135  
Sound Output
32” : 5W+5W 
Maximum Visible Range
32” : 27.6” × 15.6” (701 mm x 396 mm)
Operating Conditions
Temperature: 32° F - 95° F( 0°C to 35°C)
Humidity: 20 % - 80 % RH (non-condensing)
• Specifications are subject to change without notice.• The On-Screen Menu and figures in this manual may differ  slightly from the product.
• USB Flash Memory format : FAT16, FAT32 (no support 
exFAT or NTFS).• Some USB devices (USB HUB or card adapter) or some USB  stick may not be used with this TV.
Limited Warranty (for U.S.A. and Puerto Rico only)
Panasonic Consumer Marketing Company of North America:  
PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094
Panasonic LCD Televisions  Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North 
America. (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original 
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished 
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.
LCD TV CATEGORIES PARTSLABORSERVICEUp to 42” (diagonal)
1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-
in your product or arrange for on-site service during the Limited warranty period. If non-rechargeable batteries are included, they are not warranted. This 
Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372)
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include removal or 
re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of 
the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or 
cosmetic damage, nor does it cover markings or retained images on the LCD panel resulting from viewing fixed images (including, among other 
things, non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO 
DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures 
which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, 
misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE 
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages 
for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The 
items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how long an 
implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights 
and you may also have others rights which vary from state to state.If a \
problem with this product develops during or after the 
Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, 
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT 
COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L 4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period 
as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, 
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or 
refund will be made by Panasonic Canada Inc.
Viera TV (46” & over)In-home service One (1) year, parts (including panel) and labour.
Viera TV (under 46”) Carry-in service One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include removal or   
re-installation of an installed product. If removal is required to service the product, it will be at the discretion of the Servicer and in no 
Customer Services Directory   
(for U.S.A. and Puerto Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature 
requests by visiting our Web Site at:
http://www.panasonic.com/help  
or, contact us via the web at: 
http://www.panasonic .com/contactinfo
You may also contact us directly at:  
1-877-95-VIERA (958-4372)  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, 
EST.
 For hearing or speech impai red TTY users, TTY: 1-877-
833-8855
event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product 
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by 
Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of 
sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other 
than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. 
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR 
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, 
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not 
exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other 
rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance , please contact: 
Our Customer Care Centre: 1-800 #: 1-866-330-0014or visit our website:   concierge.panasonic. ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of  the defect claimed, and proof of date of original purchase. 
						

							11
9
13 10
14
12 8
15
Customer’s RecordThe model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model NumberSerial Number
Panasonic Consumer Marketing Company of North America,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA
M0212-0
© 2013 Panasonic Corporation of North America. All Rights Reserved. Printed in China
Accessory Purchases  
(United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books on line 
for all Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com  
or, send your request by E-mail to:  
[email protected] 
You may also contact us directly at:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday 
- Friday 9 am to 9 pm, EST.)  
Panasonic National Parts Center  
20421 84th Ave. S., Kent, WA 98032  
(We Accept Visa, MasterCard, Discover Card, and American 
Express)
 For hearing or speech impaired TTY users, TTY: 1-866-
605-1277
Watching TV
 Turn  power on  zSelect correct input. Select a channel numberTo directly enter the digital channel number
Also press CH V / CH V buttons on Side Controls or CH V / CH V buttons on Remote Controls to select programs.
● Press CH V button to select next channel.
● Press CH V button to select previous channel.For Cable/Satellite box connection- 
Use your connected box’s remote control.
Note:  z Reselect “Cable” or “Antenna” in “ANT in” of “TV” settings menu 
to switch the signal reception between cable TV and antenna. 
 zThe channel number and volume level remain the same even 
after the TV is turned off.
Listen with SAP (Secondary 
Audio Programming)
 Select the Audio mode for watching TV  Digital mode
Press [SAP] to select next Audio track (if available) when 
receiving a digital channel.
Analog mode
Press [SAP] to select the desired Audio mode.
● Each press of [SAP] will change the Audio mode.   
   (“Stereo” / “SAP” / “Mono”)
 z The selected mode is only set for the program you are 
watching at the moment.
 zSAP is not available when watching TV with a Cable or 
Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling SAP with their box.
Closed Caption (CC)
 Press [CC] to select the CC1/CC2/CC3/
     CC4, receiving mode and CC setting in   
     menu
 z The selected mode is only set for the program you are 
watching at the moment.
 zClosed Caption is not available when watching TV with a 
Cable or Satellite box connected via HDMI.
 zContact your Cable or Satellite operator for instructions on 
enabling CC with their box.
 zThe CC service is depend on the input signal.
Displaying information
 Displays or hides information. Shows the 
     channel banner when watching programs   
     via the Antenna/Cable input.
14-1
A B C-HD
A n t en n a 7: 00 A M - 8: 00 A M
SA P
TV-G CC1 480i  SD
Th e New s  480iStation
identifier Channel Program Program duration SAP indication
Rating
levelFavorite
channel Closed
Caption Signal
resolution
Input
signal
Visually impaired
e
Hearing impaired
Display the “Options menu”
 Press [OPTION] to show the “Options 
     menu”  
This menu consists of shortcuts to convenient functions.
This menu is only available when the TV is using the Antenna/
Cable input, not when using Cable or Satellite box.
Channel surf mode
Specify favorites or type of channels to view when pressing the   
[
 /  Left / Right] button.● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
Signal meterCheck the signal strength if interference is found or freezing 
occurs on a digital image.
 z If the signal is weak, check the antenna. If a problem is found, 
consult your local dealer.
Call up a Favorite channel
 FAVORITE  Channel numbers registered in Favorite are displayed on the 
“Favorite list” screen. Select the desired channel with the up/
down cursor.
To set Favorite channels
While viewing the channel that you want to set:
● “All” / “Favorite” / “Digital only” / “Analog only”
“Favorite”: Only channels registered as FAVORITE.
 zWhen watching a Favorite channel, the icon “” will be displayed on the channel banner. zYou can set up to 10 channels as Favorite. zIf you set a new channel in a used slot, the original Favorite 
channel will be deleted first then you can add a new one.
 zYou can set Favorite channels when using Cable or Satellite 
box.
To delete Favorite channels zSelect the channel you want to remove, then press OK button. zThe icon “” will be removed from the channel banner.
Password setting/entering
You need to enter the password when you access locked 
channel or inputs. 
 Input your 4-digit password   zIf it is your first time entering the password, please enter “1234”. 
This is the default password.
 zTo change password 
- Input the new 4-digit password twice. zMake a note of your password. Do not forget it. (If you have 
forgotten your password, consult your local dealer.) 
 zWhen you select a locked channel, a message will be displayed 
that allows you to view the channel after you input your password.  
Set the “Sleep timer”
The TV automatically goes into Standby after the selected 
period.
 Press [SLEEP] repeatedly until the 
     desired time appears.  
Note:  z It is also possible to set the time from “Sleep timer” in the “Setup” 
menu.
 zTo cancel, set to “Off ” or turn off the TV. zWhen the remaining time is within 3 minutes, the remaining time 
will flash on screen.
● “Off ” / “15” / “30” / “60” / “90” (minutes)
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and 
other functions so that you can enjoy watching TV best suited for you.
1無 Press MENU button, the menu will be displayed.2無 Press ▲▼ buttons to select item desired.3無 Press ◄► buttons to adjust value.4無 Press RETURN  button return to the previous menu. Display the menu zShows the functions that can be adjusted. zSome functions will be disabled depending on the type of 
input signal.
Menu structure
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e
Adjust Return
Sel ec t
/OK
Pi c t u r e m o d e Reset to defaults
Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Menu barPress [OK] or [right cursor] to move to the menu items.
Menu items
Press [OK] to enter 
submenu page 
if available. 
Operation guide Item option Intensity bar
(example: “Picture” menu)
Select the menu
Lock
TV
Setup
Picture
AudioPicture settings
Audio settings
Lock settings 
(Channel, Program, etc.)TV settings 
(Tuning, Audio language, Preferred audio type)
Setup (other settings)
Adjust or select a menu item
/
L o c k
TV
Set u p
Pi c t u r e
A u d i o
Pi c t u r e Ret u r n
Sel ec t
Pi c t u r e m o d e Vi v i d
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p . Adjust or select option Select item
R e s e t   t o   d e f a u l t s
 z Some items have submenus, press the [OK] button to enter 
the submenu.
Pi c t u r e
Ret u r n
Sel ec t
/
L o c k
TV
Set u p
Pi c t u r e
A u d i oA.I. picture
OnEnter submenuWeak
Video NRAdvanced picture
Settings Items Option
Picture
 Reset to defaults
Resets all picture adjustments 
to factory default settings.
Picture mode Vivid/Standard/Cinema/Game/
Custom
Back light [Adjusts the luminance of the 
back light.]
Contrast, 
Brightness, 
Color,  
Tint,  
Sharpness [Adjusts the color, brightness, 
etc. for each picture mode to 
suit your preference]
Color temp. Cool/Normal/Warm
• Selects a choice of Cool (blue), 
Normal, or Warm (red) color.
A.I. picture  Off/On• Controls dark areas without 
affecting the black level or 
brightness in the overall picture. 
Video NR(DOT NOISE 
REDUCTION)Off/Weak/Medium/Strong•  Reduces noise, commonly called 
snow. Leave it off when receiving a 
strong signal. 
• Some menus are grayed out depending on the input 
signal or condition.
Advanced 
picture 3D Y/C Filter :
 Minimizes noise 
and cross-color in the picture.
Color matrix :  Selects image 
resolution of component-connected 
devices.
SD: Standard-Definition
HD: High-Definition
Only used with 480p video signal.
Black level  :  Selects Dark or 
Light. Valid only for external input 
signals.
MPEG NR :  Reduces picture 
noise in MPEG-compressed video.
• For Digital TV only 
3:2 pulldown  :  (Off/Auto) Adjusts 
the picture recorded in 24 fps for 
optimum quality.
Aspect adjustments  :  Screen format  (FULL/4:3/JUST/
ZOOM/H-FILL) Changes the format 
(aspect ratio). Lets you choose the 
aspect depending on the format of 
received signal. 
H size (Size1/Size2) Adjusts the 
horizontal display range to reduce 
noise of both side edges of an image.
Size 2: Adjusts the image size 
according to the aspect mode to 
reduce noise.
HD size (Size1/Size2) 1: Display 
95% of HD signal, to trim noise at the 
edges of the screen.
2: Full image.
Zoom adjustments
 (V-position/ 
V-size) Adjusts vertical alignment 
and size when aspect setting is 
“Zoom”.
Settings Items Option
AudioReset to defaultsResets all audio adjustments to 
factory default settings.
Bass [Increases or decreases the 
bass response.]
Treble [Increases or decreases the 
treble response.]
Balance [Emphasizes the left / right 
speaker volume.]
Surround Off/On
 
Enhances audio L/R response when 
listening to stereo.
TV speakers Off/On
 Switches to “Off” when using 
external speakers.Off: “Surround” 
does not work if “Off” is selected.
Digital audio 
out Auto :
 
Bypass DTS signal if input 
source is DTS format, or fixed output 
to Dolby Digital besides DTS source.
PCM : Digital output signal is fixed 
to PCM.
Audio input HDMI1-2 in
 :  
(Digital/Analog )
Select audio input terminal when 
DVI cable is connected.
(Analog audio input signal)
You will be asked to enter your password each time you display 
the “Lock” menu.
Settings Items Option
Lock
ModeOff : 
Unlocks all the Lock settings 
of “Channel”, “Program” and “Input”.
All :  Locks all the inputs regardless 
of the Lock settings of “Channel”, 
“Program” and “Input”.
Custom :  Locks specified inputs 
of “Channel”, “Program” and “Input”.
Channel  (These channels 
will be blocked 
regardless of the 
program rating.)[Select a channel to lock.]
Program  
(To set a rating 
level)
Mode : (Off/On)Set program lock 
status. “V-chip” technology enables 
restricted shows to lock according to 
TV ratings.
On: Set each rating level (U.S.TV 
Ratings, U.S. Movie Ratings, 
Canadian English ratings., Canadian 
French ratings.)  
U.S.TV ratings/U.S. Movie 
ratings/Canadian English 
ratings/Canadian French 
ratings
Input HDMI1/HDMI2/Component/
Video 
 
Locks external inputs accordingly.
Change 
password [Changes the password. Input 
the new 4-digit password 
twice.]
• This television is designed to support the “Downloadable U.S.   
  Region Rating System” when available.(Available only in the    
  U.S.A.)
• The Off rating is independent of other ratings.
• When placing a lock on a specific-age-based-rating level, the Off   
  rating and any other more restrictive ratings will also be blocked.
Settings Items Option
TVANT inCable/Antenna
Auto program Automatically retune the channels 
received in the area.
Manual 
Program Set Analogue channel manually 
after Automatic Channel Search.
MTS Stereo/SAP/Mono
 
Selects the Audio mode for watching TVAudio 
LanguageEnglish/Spanish/French
 Selects the language for TV programs
Preferred 
audio typeMain audio/Hearing impaired/
Visually impaired
Narration settings for impaired users
Hearing Impaired: Activates closed 
captioning when available on 
broadcasts.
Visual Impaired: Activates the 
narration soundtrack when available 
on broadcasts.
• For Digital TV only.
Settings
Items Option
SetupLanguageEnglish/Español/Français
Timer set Sleep Timer :
 (Off/15/30/60/90 
(minutes))
No signal for 10 minutes  :
 (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically turns 
off when NO SIGNAL and NO OPERATION 
continue for more than 10 minutes.
No activity for 3 hours  : (Stay 
on/ Power TV off)   
To conserve energy, the TV automatically 
turns off when no operation of remote and side 
panel key continues for more than 3 hours.
Closed Caption Displays subtitles (Closed caption) 
Input labels You can label the terminal with the 
type of equipment connected to it. 
HDMI control CEC function
 : (Off/On
) On:  The 
TV is turned on automatically and 
switches to the appropriate HDMI 
input whenever an HDMI connected 
equipment is initially turned on and 
the Play mode is selected.
Power off link : (No/Yes) 
On:  When the TV is turned off, all 
HDMI connected equipment is also 
automatically turned off.  
• A Panasonic DVD Recorder will not 
turn off if it is still in Rec mode.  
• The TV remains on even if the HDMI 
connected equipment is turned off. 
About Displays TV version and 
software license.
Reset to 
defaults Performing reset will clear all 
settings made in the “Setup” 
menu, such as channel 
settings.
After reset, “First time setup” 
will launch when you next 
power on the TV.
• The television includes a built-in decoder that is capable of   
  providing a text display of the audio. The program being viewed   
  must be transmitting the Closed Caption (CC) information. 
• The settings in “Analog” or “Digital” depend on the broadcaster.
Using Media player
Media Player allows you to enjoy photo or music 
recorded on a USB Flash Memory.
The picture may not appear correctly on this TV 
depending on the recording equipment used.
 z Display may be delayed when there are many files and folders. zPartly degraded files might be displayed at a reduced 
resolution.
 zPicture settings may not take effect depending on the 
conditions.
 zThe folder and file names may be different depending on the 
digital camera or digital video camera used.
Starting Media Player

 Insert the USB Flash Memory to the TV 
 z Insert the device zRemove the device
Insert
straight inPull straight 
out
 zMedia player only supports USB Mass storage class devices.
COMPLIANCE:
- Supports only USB1.1 or USB2.0 standard.
- Supports file format of FAT16 or FAT32.
- Maximum USB capacity supported is 32GB.
- USB Hub or card adapter is not supported.
Viewing Contents

 Start Media PlayerMEDIA
PLAYER
 Select the contents
Photos Music
Media selectUSB EXIT
Select
RETURN
Access
 Select the data [Photos] / [Music]
How to view the data differs depending on data storage 
conditions.
1無 Select Title/Folder 2無 Select file
 View or play
Thumbnail / Playback view image and operation differ 
depending on selected contents.
Photos view
Supported file format  (p.13)
The thumbnail of all the photos in the USB Flash 
Memory will be displayed.
EXIT
Select RETURN
Slideshow View select Info
View
Slideshow settings USB
Media player  Photos 
All photos
Operation guide
Media select
Drive select
Features
● Slideshow  
 
● View select  
● Drive select  
● Media select  
 : Error display
Displays data information (file name, date, size, 
etc.) and differs depending on selected data. 
INFO
[View select]
1無 Display the viewing mode selection screen 
2無 Select the view type
Fo l d er s Select
 OK
 zFolder view: Displays the thumbnails grouped by folders 
3無 Select folder view to display the thumbnails of the selected 
group
OPTION
2010/10/23
2010/11/24 2010/10/25
2010/12/012010/11/01
2010/12/032010/11/05
2010/12/202010/11/10
2010/12/222010/11/22 2010/11/23
Med i a pl ay er   Ph o t os
USBEXIT
Select RETURN View select
Slideshow Info
View
Slideshow settings
Drive select Media select
 Select
 Display thumbnails of the  selected folder
•  To return to the thumbnail of all photos Select
 OK
[Slideshow settings]1無 Display the “Slideshow settings” screen OPTION
2無 Select the items and set 
Sl i d es h o w  s et t i n g sTr an s i t i o n  ef f ec t Wipe
Di s p l ay  i n t er v al
Ph o t o  s i ze
No r m al5 s ec o n d sRep eat Of f
Bac kground music Of f
 Select OK
  Transition effectEffect for photo switching during slideshow.  [None] / 
[Dissolve] / [Wipe  g] / [Wipe 
] / [Wipe 
h] / [Wipe 
] / 
[Box in] / [Box out] / [Random]
  Photo sizeSelects enlarged or normal viewing mode on Single view 
and Slideshow.  [Normal] / [Zoom]  
• Depending on the photo size, the photo may not be  enlarged.
 Display intervalSets the interval for each image to be displayed in the 
Slideshow mode.  [5] / [10] / [15] / [30] / [60] / [90] / [120]  
(seconds)
  RepeatTurn the slideshow repeat (cycle) function on or off.   
[Off] / [On]
  Background musicSelects the background music during Photo mode  
[Off] / [Type1] / [Type2] / [Type3]   
• [Type1], [Type2] and [Type3] are the fixed music each   
  installed in this TV.
Note: 
 z Picture quality may suffer depending on the slideshow settings. zPicture setting may not work depending on the slideshow 
settings.
Music play
Supported file format  (p.13)
Music folders in the USB Flash Memory will be 
displayed.
My Music_1 My Music_2 My Music_3
Media player sredloF
 cisuM 
USB
EXIT
Select RETURN
 yalP Info
Access
Music options
Drive select
Operation guide
Media select
folder
Features
● Play folder   
 
● Drive select  
● Media select  
[Music options]1無 Display the “Music options” screen OPTION
2無 Set the play repeat mode to your preference  Repeat
     ([Off] / [One] / [Folder])
Mu s i c  o p t i o n s
Rep eat On eSelect
[Other settings in Media player]1無 Display the menu
2無 Select the “Picture” item  Select
 NextLock
TV
Picture
Audio
3無 Set Adjust the Picture and Audio
      Select AdjustPi c t u r e
A u d i o
Pi c t u r e Return
Sel ec t
/
Co o l
B ac k  l i g h t
100
100
60
60
0
70
Co n t r as t
B r i g h t n es s
Co l o r
Ti n t
Sh ar p n es s
Co l o r  t em p .
Pi c t u r e m o d e
Vi v i d
R e s e t   t o   d e f a u l t s
 z
Some items are grayed out to indicate that these items are 
not available. Availability depends on the contents you are 
enjoying.
Supported file format in Media 
Player
 Photos
Format File extension
JPEG .jpg
.jpeg
Image resolution  (pixel) Details / Restrictions
4 × 4 to
15,360 × 8,640 DCF and EXIF standards
Sub-sampling: 4:4:4, 4:2:2, 4:2:0
● Progressive JPEG is not supported.

 Music
Codec File extension
MP3 .mp3
Restrictions
Bit rate support● 32/40/48/56/64/80/96/112/128/160/192/224/256/320   
    kbits/s
● VBR no support
Note: 
 zSome files may not be played back even if they fulfill these 
conditions.
 zDo not use two-byte characters or other special codes for data. zThe device may become unusable with this TV if the file or folder 
names are changed.
 zThe picture may not appear correctly on this TV depending on 
the recording equipment used. 
 zDisplay may take some time when there are many files and 
folders. 
 zThe function cannot display Motion JPEG and still image not 
DCF formatted (i.e. TIFF, BMP). 
 zData modified with a PC may not be displayed.  zImages imported from a PC must be compatible with EXIF 2.0, 2.1 
and 2.2. 
 zPartly degraded files might be displayed at a reduced resolution.  zAll “.JPG” extension data in the USB flash memory will be read 
in Photo viewer Mode. 
 zThe folder and file names may be different depending on the 
digital camera used. 
Specifications
Power rating AC 110-127 V, 60 Hz
Rated Power Consumption
32” : 56 
Watts 
Standby condition32” : 0.3 
Watts 
Visible screen size (diagonal)32” class : 31.5 inch (80cm)
Number of pixels
32” HD (1366X768) 
 
Dimensions (W × H × D)   (Including Stand)
32” : 29.2” × 20.2” × 8.2” (741 mm × 513 mm × 207 mm)
Net Weight 
32” : 17.6Ib. (8 kg)  (Including Stand)
32” : 15.4Ib. (7 kg)  (TV only)
Sound System
 1-way 2 bottom SP System
Channel Capability-ATSC/NTSC (Digital/Analog)
VHF/UHF: 2 - 69, CATV: 1 - 135  
Sound Output
32” : 5W+5W 
Maximum Visible Range
32” : 27.6” × 15.6” (701 mm x 396 mm)
Operating Conditions
Temperature: 32° F - 95° F( 0°C to 35°C)
Humidity: 20 % - 80 % RH (non-condensing)
• Specifications are subject to change without notice.• The On-Screen Menu and figures in this manual may differ  slightly from the product.
• USB Flash Memory format : FAT16, FAT32 (no support 
exFAT or NTFS).• Some USB devices (USB HUB or card adapter) or some USB  stick may not be used with this TV.
Limited Warranty (for U.S.A. and Puerto Rico only)
Panasonic Consumer Marketing Company of North America:  
PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way Secaucus, New Jersey 07094
Panasonic LCD Televisions  Limited Warranty
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North 
America. (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original 
purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished 
equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.
LCD TV CATEGORIES PARTSLABORSERVICEUp to 42” (diagonal)
1 (ONE) YEAR1 (ONE) YEAR Carry-In
46” (diagonal) and larger On-Site
During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. You must carry-
in your product or arrange for on-site service during the Limited warranty period. If non-rechargeable batteries are included, they are not warranted. This 
Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser of a new product which was not sold “as is”. A purchase receipt or other proof of the original purchase date is required for warranty service.
On-Site or Carry-in Service
For On-Site or Carry-In Service in the United States and Puerto Rico call 1-877-95-VIERA (1-877-958-4372)
On-site service where applicable requires clear, complete and easy access to the product by the authorized servicer and does not include removal or 
re-installation of an installed product. It is possible that certain on-site repairs will not be completed on-site, but will require that the product or parts of 
the product, at the servicer’s discretion be removed for shop diagnosis and/or repair and then returned.
Limited Warranty Limits And Exclusions
This Limited warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or 
cosmetic damage, nor does it cover markings or retained images on the LCD panel resulting from viewing fixed images (including, among other 
things, non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). The Limited Warranty ALSO 
DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures 
which result from accidents, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, 
misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a 
hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service Center or other Authorized 
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”.THE 
WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF 
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this excludes damages 
for lost time, cost of having someone remove or re-install an installed unit if applicable, or travel to and from the servicer. The 
items listed are not exclusive, but are for illustration only.)  ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE 
LIMITED WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or co\
nsequential damages, or limitations on how long an 
implied Limited Warranty lasts, so the exclusions may not apply to you.This Limited Warranty gives you specific legal rights 
and you may also have others rights which vary from state to state.If a \
problem with this product develops during or after the 
Limited Warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, 
then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE (INCLUDING COST OF AN ON-SITE SERVICE CALL, WHERE APPLICABLE) WHICH ARE NOT 
COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.
Limited Warranty (for Canada)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L 4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period 
as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, 
(b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or 
refund will be made by Panasonic Canada Inc.
Viera TV (46” & over)In-home service One (1) year, parts (including panel) and labour.
Viera TV (under 46”) Carry-in service One (1) year, parts (including panel) and labour.
In-home Service will be carried out only to locations accessible by roads and within 50 km of an authorized Panasonic service facility.
In-home service requires clear, complete and easy access to the product by the Authorized Servicer and does not include removal or   
re-installation of an installed product. If removal is required to service the product, it will be at the discretion of the Servicer and in no 
Customer Services Directory   
(for U.S.A. and Puerto Rico)
Obtain Product Information and Operating Assistance; locate 
your nearest Dealer or Service Center; purchase Parts and 
Accessories; or make Customer Service and Literature 
requests by visiting our Web Site at:
http://www.panasonic.com/help  
or, contact us via the web at: 
http://www.panasonic .com/contactinfo
You may also contact us directly at:  
1-877-95-VIERA (958-4372)  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, 
EST.
 For hearing or speech impai red TTY users, TTY: 1-877-
833-8855
event will Panasonic Canada Inc. or the Servicer be liable for any special, indirect or consequential damages.
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product 
mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging. IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS REQUIREDLIMITATIONS AND EXCLUSIONSThis warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by 
Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, 
set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of 
sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other 
than a Authorized Servicer, or damage that is attributable to acts of God. Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. 
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR 
ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, 
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not 
exhaustive, but for illustration only.)In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other 
rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance , please contact: 
Our Customer Care Centre: 1-800 #: 1-866-330-0014or visit our website:   concierge.panasonic. ca
For product repairs, please contact Viera Customer Care Agent using the above contact info.
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in th\
e original carton. Include details of  the defect claimed, and proof of date of original purchase.