Panasonic Lcd Tv Tc 32lh1 Operating Instructions

							11
Connections
How to connect with other equipment
Connect VCR and other peripheral equipment
L
R
L
R
YY
L
RL
RS-VIDEOVIDEO
VIDEO VIDEOAU DI O
AUDIO AUDIOPBPBPRPR 12
AUDIO OUT
INPUT 1
COMPONENT VIDEO
INPUT
L
R
L
R
YY
L
RL
R
S-VIDEO
VIDEO
VIDEO VIDEOAUDIO
AUDIO AUDIO
PBPB
PRPR 12
AUDIO OUT
INPUT 1
COMPONENT VIDEO
INPUTPr Pb YAudio
OUT
LR
Audio
IN
R L
Audio
OUT R LS-Video
OUT Video
OUT
Notes:
•When connecting video cables, priority is given to the S-Video cable when the S-Video input terminal
and the video input terminal are connected at the same time.
•The volume control output of the LCD TV will be fixed. (SOUND,ADJUST, VOLUME UP/DOWN and
SURROUND ON/OFF are not functional for output signals from the AUDIO OUT terminals.)(Super-VHS VCR)
Connection example
INPUT1 connection
or
INPUT2 connection.
Connect the S-
VIDEO or
VIDEO Terminal S-VIDEO
cable
VIDEO
AUDIO
(DVD/STB)
VIDEO
AUDIO Connection example
component VIDEO
INPUT1 connection
or
component VIDEO
INPUT2 connection.
COMPONENT VIDEO OUT 
						

							12
AN TAU
DIO  I
N
LR
HDMI
∗1 (HDMI : High Definition Multimedia Interface) is the first all digita\
l consumer electronics A/V interface
that supports uncompressed standard. One jack supports both video and au\
dio information.
This HDMI ∗
1 input can be connected to an EIA/CEA-861/861B ∗2 compliant consumer electronic device,
such as a Set Top Box or DVD player equipped with HDMI or DVI output connection.
By inputting a High-bandwidth Digital Content Protection (HDCP) high-d\
efinition picture source to the HDMI
terminal of this television, high-definition pictures can be displayed o\
n the screen in their digital form.
∗1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trad\
emarks or registered trademarks of HDMI Licensing LLC.
∗2. EIA/CEA-861/861B profiles compliance covers profiles for transmission\
 of uncompressed digital video
including high bandwidth digital content protection.
∗3. HDMI-DVI conversion cable part no. (T Y-SCH03DH): available from the Panasonic National Parts
  Center at 1-800-332-5368 or on the Panasonic Website (USA only) at ww w.panasonic.com.
∗4. AUDIO-IN, Please refer to page 24. (HDMI-IN)
If the external device has DVI output only, use a HDMI-DVI
conversion cable ∗3 to connect to the HDMI jack on the LCD.
Also, connect the Audio out signal from the external device.
(Set Top Box or DVD player) to the AUDIO IN ∗
4 jacks beside
the HDMI input.
This model support following format.
Please adjust the format of connecting equipment.
1080i
480P
480i   No. of dots (H 
× ×  × × 
× 
V)
 1,920  × × 
× × 
× 
1,080i
 720  × × 
× × 
× 
480P
 640  × × 
× × 
× 
480P
 720(1,440)  × × 
× × 
× 
480i
Vertical scanning frequency(Hz)
 59.94/60
 59.94/60
 59.94/60
 59.94/60
Applicable VIDEO Signal
This input terminal is not intended for use with computers.
AUDIO signal (L.PCM)
When the digital sound signal is included at connecting HDMI equipment, \
L.PCM sound is available.
Sampling frequency 48KHz / 44.1KHz / 32 KHz
Notes:
(1) This HDMI connector is Type A.
(2) If you cannot display the picture because your Digital Set Top Box does not have a Digital OUT terminal Output setting, use the component Video input (or the S video Input or Video Input). In this case the picture
will be displayed as an analog signal.
HDMI Cable (not included)
HDMI or DVI
signal out Set Top Box
DVD player
Audio Cable
(not included)
How to connect the HDMI Terminal 
						

							13
Power ON / OFF
Connecting the Plug to the Wall Outlet
Note:
The TV’s power cord must first be plugged into the wall outlet.
How to Turn the Power On
Press the Main POWER switch on the front of TV to turn
the set on.
POWER-ON: Green
When the set is on or in standby mode press the Main
POWER switch on the TV to turn the set off.
POWER-OFF: No light
Example: The screen below is displayed for a while after
the TV is turned on. (setting condition is an
example.)
Press the POWER button on the remote
control to turn the TV off: Red (standby)
Press the POWER button on the remote
control to turn the TV on: Green
POWERDTV
AUXDV D
VCR
DBS
RCVR
RETURN
EXITMENU
SAP
MUTEASPECTTV/VIDEOLIGHT
POWER
CBL
CH
CH VOL VOLOK
TV
Main POWER switchCH 6STEREO
SAP
MONOZOOM
Note:
The TV will still consume some power as long as the power
cord is still plugged into the wall outlet. 
						

							14
Illuminated Remote Control
Power button
Press to turn the TV ON or OFF.
Note: The TV’s power cord must first be plugged into the wall outlet and
then turned on at the POWER switch (standby mode).
R-TUNE button
Switches to previously viewed channel or video mode. MUTE button
Press this button to mute the sound, press again to cancel the mute.
Operation of other Device
Mode Selection buttons
VCR Mode Selection for
Remote ControlDigital Video Disc Mode Selection
for Remote ControlAux Mode Selection for Remote Control
TV Mode Selection for
Remote ControlDigital Broadcasting Satellite
for Remote Control Receiver/Amplifier Mode
Selection for Remote Control
Digital TV Mode Selection for
Remote ControlCable TV Mode Selection for
Remote Control ASPECT button
Change of screen size (See page 20).
R-TUNE
Location of Controls
JUST ZOOM FULL
NORMAL
DTV
AUXDVD
VCR
DBS
RCVR
CBL
TV
TV/VCR Switch
-
-
-
VCR CH up/down
CABLE CH up/down
SLOW +
/--  /RAND. REP
Center +
/--  
-
-
OPEN/CLOSE
-
VCR
CABLE/DBS
DVD/CD
RCVR
VCR
CABLE/DBS
DVD/CD
RCVRVCR REW/FF
-
Skip Search REW/FF
Surround +
/
--
PLAY
-
PLAY
-
VCR RECORD
CABLE RECORD
-
-
Pause
-
Pause
-
STOP
-
STOP
-
Buttons Buttons
DeviceFFSTOPREWPLAYPAUSE
Buttons Buttons
DeviceOPEN/CLOSERECTV/VCRVCR CH 
						

							15
Lights the remote control buttons.
The selected button blinks when lit. TV/VIDEO button
The input mode changes each time this button is pressed.
SAP button
Selects Audio mode (See page 24).
STEREO SAP MONO
Location of Controls
COMPONENT 2 TV
COMPONENT 1
HDMI VIDEO 1VIDEO 2
123
456
78
09
DTV
AUXDV D
VCR
DBS
RCVR
RETURN
EXITMENU
PLAY R-TUNE SLEEP/PROGGUIDESAP
PA G E RECALL
STOP PAUSERECFF REW
TV/VCR
VCR CHOPEN/CLOSE
MUTEASPECTTV/VIDEOLIGHT
POWER
CBL
CH
CH VOL VOLOK
TV
T V
Direct program number
selection buttonsPress to display the current system status, for example, Aspect
mode, Channel number, Stereo mode, Picture menu, TV/VIDEO,
Power save, Off timer and Color system.GUIDE button
for DBS. Page up/down for DBS,
skip +/- for DVD & CD.
PROG dash button / SLEEP TIMER button
Program dash channel numbers for DTV and DBS.
Sleep timer (MINUTES)
SLEEP/PROG
Reduces volume
Moves cursor to
the left during
menu mode.
Displays menu
Press to access
TV, DTV, DBS or
DVD menus.
Changes to the next
channel down
Moves cursor downward
during menu mode.Increases volume
Moves cursor to
the right during
menu mode. Changes to the next channel up
Moves cursor upward during menu mode.
Press to Return
to previous
MENU or EXIT
from menu.
RETURN
EXITMENU
CH
CH VOL VOLOK
GUIDE PAGE RECALL
3060 90
0 
						

							16
123
456
78
09
DTV
AUXDV D
VCR
DBS
RCVR
RETURN
EXITMENU
R-TUNE SLEEP/PROGGUIDESAP
PA G E RECALL
MUTEASPECTTV/VIDEOLIGHT
POWER
CBL
CH
CH VOL VOLOK
TV
CH
VOL VOLOK
CHMENU
Flow Chart of MENU
All adjustments and setting functions available in this set can be made using the menu buttons.
The menu screen is composed of 2 menus: the ADJUST menu and the SET UP menu.
MENUADJUSTSET  UP
LANGUAGE
PROGRAM  CH
LOCK
CLOSED  CAPTION
INPUT  LABEL
OTHER  ADJUST
2
CH
CH VOL VOLOK
MENUADJUSTSET  UP
LANGUAGE
PROGRAM  CH
LOCK
CLOSED  CAPTION
INPUT  LABEL
OTHER  ADJUST
MENU selection
orPress to display MENU
screen, press again to
clear.
MENUADJUST
PICTURE
AUDIOSET  UP
PICTURE  ADJUST
POSITION / SIZE
AUDIO  ADJUST
MENUADJUST
PICTURE
AUDIOSET  UP
PICTURE  ADJUSTPOSITION / SIZE
AUDIO  ADJUST
MENUADJUST
PICTURE
AUDIOSET  UP
PICTURE  ADJUST
POSITION / SIZE
AUDIO  ADJUST
An On Screen Help box is displayed whenever a menu is displayed
on the TV. This Help box indicates which keys on the remote control
are used to navigate the menu shown. See above for descriptions
of button functions.
Please refer to the On Screen Help
ON SCREEN HELP
‘Instruction’ boxLANGUAGE
ENGLISHLANGUAGE
RETURN CHANGE
1 
						

							17
Flow Chart of MENU
OFF          ONCOOLCOOL
PICTURE  ADJUST
NORMALIZE
PIC  MODE
BACK  LIGHT
PICTURE
BRIGHTNESS
COLOR
TINT
SHARPNESS
AI  PICTURE
+ 20
+ 20
0
-  1
0
0
OFF     ON
STANDARD
TO PICTURE ADJUST
menu
(See page 21)
Press the RETURN
button to return to
previous screen. Press the RETURN
button to return to
previous screen.
CH
CH VOL VOLOK
• To return to previous screen :
• To end adjustments :Press to return.
RETURN
EXIT
Press to exit from the MENU screen.
This returns the set to the normal viewing condition.
MENU
Press to select the desired MENU (ADJUST or SET UP).
Press to select each item.
Press to display each adjustment screen.
Proceed to the adjustment.
Press to display each
adjustment screen. Press to display each
adjustment screen.
LOCK
BLOCK  PROGRAMS
STATUSU. S.   MOVIES
CHANGE  SETTING
ENTER  CODE  FIRST
OFF  ON
TO LOCK
selection screen
(See page 25) TO AUDIO ADJUST
menu
(See page 24)
AUDIO  ADJUST
NORMAL
 + 10
+   8
0
DYNAMIC
OFF     ON
OFF     ON
AUTO MODE
BASS
TREBLE
BALANCE
SURROUND
EQUALIZER
STEREO    SAP      MONO
HDMI INPOSITION/SIZE
NORMAL
NORMALIZE
  SIZE
    1
RETURN
LANGUAGE
ENGLISHLANGUAGE
TO LANGUAGE
Allows you to select the
language used for On
Screen Displays.
PROGRAM  CHANNELS
MODE
AUTO  PROGRAM
MANUAL  PROGRAM     TV    CABLE
TO PROGRAM
CHANNELS
(See page 18,19)
TO INPUT LABEL
selection screen
(See page 30)
INPUT  LABEL
COMPONENT1
COMPONENT2
VIDEO1
VIDEO2
HDMI
COMPONENT1
COMPONENT2
VIDEO1
VIDEO2
HDMI
TO OTHER ADJUST
 screen
(See page 30)
OTHER  ADJUST
VIDEO NROFF  ON
3D  Y/C  
COLOR  MATRIX
OFF   ON
POWER SAVESTANDARD
SD  HD
CLOSED  CAPTION
MODEOFF
ON MUTENO
TO CLOSED
CAPTION
(See page 29)RETURN
EXIT
RETURN
EXIT
OK
OK 
						

							18
Tuning channels (Automatic channel programming)
Automatically scans all TV channels and stores them in memory.
Notes:
• When buttons are pressed with AUTO PROGRAM running, the TV set will return to normal viewing.
(Channels searched up to this point are added.)
• After AUTO PROGRAM is finished, the lowest channel number added will be received.
• When there are no receivable channels, channel 69 is displayed for TV and channel 125 is displayed
for cable TV.Press to select PROGRAM CH.
Press to display the PROGRAM
CHANNELS screen.
2
3
Press to select MODE.
Press to select TV or CABLE.
4
Press to select AUTO PROGRAM.
Press to display the confirmation
screen.
5Press to select YES.
Press to select NO.
Press to run AUTO PROGRAM. Press the MENU button to display the MENU screen and select SET UP.
CH
CH VOL VOLO K
CH
CH VOL VOLO K
CH
CH VOL VOLO K
CH
CH VOL VOLO K
Channels will automatically advance until all channels have been
scanned. Channel numbers with a video signal present will be stored
in the Channel Scan Memory.
MENU
ADJUSTSET  UP
LANGUAGE
PROGRAM  CH
LOCK
CLOSED  CAPTION
INPUT  LABEL
OTHER  ADJUST
AUTO  PROGRAM
Activate
AUTO  PROGRAM?
YES                 NO
AUTO  PROGRAM
In  AUTO  PROGRAM
STOP
CHANNEL                         59     
MENU
1Turn the Power on and press the TV/VIDEO button to display the TV channel.
PROGRAM  CHANNELS
MODE
AUTO  PROGRAM
MANUAL  PROGRAM     TV    CABLE
Press to exit from the MENU screen.
This returns the set to the normal viewing condition.MENU 
						

							19
PROGRAM  CHANNELS
MODE
AUTO  PROGRAM
MANUAL  PROGRAM     TV    CABLE
Adding or deleting channels
MANUAL  PROGRAM
ENTER  CHANNEL
121
RETURN DELETE
CH  SELECTADD
MANUAL  PROGRAM
ENTER  CHANNEL
121
RETURN DELETE
CH  SELECTADD
Press to select MANUAL PROGRAM.
Press to display the MANUAL
PROGRAM screen.
1
Press to select channel
(or number keys).2
3
Press to add channels to memory (Channel
number turns blue).
Press to delete channels from memory
(Channel number turns yellow).
4Repeat steps 2 and 3 to continue adding or deleting channels.
CH
CH VOL VOLO K
CH
CH VOL VOLO K
Press to exit from the MENU screen.
This returns the set to the normal viewing condition.MENU
Tuning channels (Manual channel programming)
Use this setting when changing setting of receiving channels or changing the channel display.
Turn the TV on and select the broadcast channel. Follow the steps on the previous page to display the
PROGRAM CHANNELS screen.
CH
CH VOL VOLO K 
						

							20
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen
cinema format picture.
ASPECT button
The aspect mode changes each time the ASPECT button
is pressed.
Note:
When a 1080i signal is being received, the mode is set to
FULL, and aspect switching is not possible.
ASPECT
NORMAL mode will display a 4:3
picture at its standard 4:3 size.
ZOOM mode magnifies the central
section of the picture.
FULL will display the picture at its
maximum size but with slight
elongation. JUST mode will display a 4:3 picture
at its maximum size but with aspect
correction applied to the sides of the
screen so that elongation is only
apparent at the left and right edges of
the screen. The size of the picture will
depend on the original signal.
Mode
Picture Explanation
NORMAL
ZOOM
FULL JUST
JUST4
39 16
ZOOM4
316
9
FULL4
316
9
NORMAL
3 4
ASPECT Controls
JUST ZOOM FULL
NORMAL
DTV
AUXDVD
VCR
DBS
RCVR
RETURN
EXITMENU
SAP
MUTEASPECTTV/VIDEOLIGHT
POWER
CBL
CH
CH VOL VOLOK
TV
MUTEASPECTTV/VIDEOLIGHT