Panasonic Lcd Tv Tc 22lh1 Operating Instructions

 LCD TV
Operating Instructions
TQBC0633-1
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
English
Model No.TC-22LH1
For assistance, please call : 1-800-211-PANA (7262)
or send e-mail to : [email protected]
or visit us at www.panasonic.com                                (U.S.A)
For assistance, please call : 787-750-4300
or visit us at www.panasonic.com                      (Puerto Rico)
For...

2
Important Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are in
the papers with the appliance.

 Note to CATV System Installer: This reminder is provided to direct the CATV system installer’s
attention to Article 820–40 of the NEC that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding...

3
15) If an outside antenna is connected to the
television
 equipment, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built up static
charges. In the U.S. Selection 810-21 of the
National Electrical Code provides information
with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to  an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding...

4
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
Dear Panasonic Customer
Welcome to the Panasonic family of customers.
We hope that you will have many years of enjoyment from your new LCD TV.
To obtain maximum benefit from your set, please read these instructions before
making any adjustments, and retain them for future reference.
Retain your purchase receipt, and record the model number and serial number
of your set in the...

5
Table of Contents
Important Safety Instructions .............................. 2
Installation ............................................................. 6
SUPPLIED ACCESSORIES ................................ 6
Remote control battery installation ...................... 7
Maintenance .......................................................... 7
Connections .......................................................... 8
Connecting the Antenna Cable to the Antenna Terminal ....8
Antenna cover removal and...

6
Installation
Receiver LocationLocate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For
best...

7
 
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control
transmitter.
Observe the following precautions:
1.   Always use new batteries when replacing the old set.
2.   Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
3.   Battery replacement is necessary when remote control acts sporadically or stops operating this unit.
Notes:
• Do not drop, apply shock to or step on the remote control.
• Do not...

8
S
-V
ID
E
OS
-V
ID
E
O
Y
Y
L
RL
RVIDEO
VIDEO
AUDIO
AUDIOPBPBPRPR 1
2 1
2C
O
M
P
O
N
EN
T
 VID
E
O
IN
P
U
TL
RL
RVIDEO
VIDEO
AUDIO
AUDIOIN
PU
T
21
Connections
Connecting the Antenna Cable to the Antenna Terminal
S-VIDEO S-VIDEOL
R
YY
L
RL
R
VIDEO VIDEO
AUDIO AUDIOPBPBPRPR 12 12
AUDIO OUTHPJ
COMPONENT VIDEO
INPUTL
RL
RVIDEO VIDEO
AUDIO AUDIOINPUT
ANT
Antenna Connection - For proper reception of VHF/UHF channels, an external antenna is required. For best
reception an outdoor antenna is recommended....

9
Connections
Use this configuration when connecting the TV to a cable TV system using a Cable Box.
Antenna Connection (Cable Box, no VCR)
Use this configuration when connecting the TV to a cable TV system using a Cable Box and VCR.
Antenna Connection (Cable Box, and VCR)
S-VIDEO S-VIDEOL
R
YY
L
RL
R
VIDEO VIDEO
AUDIO AUDIOPBPBPRPR 12 12
AUDIO OUTHPJ
COMPONENT VIDEO
INPUTL
RL
RVIDEO VIDEO
AUDIO AUDIOINPUT
ANT
Connect the cable from the Output
terminal on the back of the Cable
Box to the ANTENNA terminal...

10
Cable cover removal and fitting
Connections
Note:
Depending on the type of cable used it may not be possible to close the cover. In such cases the cable may be routed
through the antenna cover.
Connect camcorder and video game console.
How to connect the input/output terminals
Removal
1. Disengage the claws at
the uppermost end.
2. Slowly pull out in the
upward direction.
Fitting
1. Insert the claws (at 2
points) at the bottom.
2. Push in the TOP.
S-VIDEO S-VIDEO
L
R
YY
L
RL
R
VIDEO VIDEO
AUDIO...