Panasonic Lcd Television Tc L24x5 Owners Manual

Owner’s Manual
LCD Television
Model No.
TC-L24X5
TC-L24X5X
For assistance (U.S.A./Puerto Rico), please call:1-877-95-VIERA (958-4372)www.panasonic.com/help
For assistance (Canada), please call:1-866-330-0014concierge.panasonic.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:1-877-95-VIERA (958-4372)www.panasonic.com/help 
Gracias por su decisi\363n de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y gu\341rdelas pa\
ra consultarlas en 
el futuro. Las...

2
Contents
SAFETY PRECAUTIONS ........................................................................\
............................3Note to CATV System Installer ........................................................................\
........................................................................\
......... 3Secure Ventilation ........................................................................\
........................................................................\...

3
SAFETY PRECAUTIONS
CAUTIONRISK OF ELECTRIC SHOCK 
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the...

4
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70ANTENNA 
LEAD IN WIRE
GROUND 
CLAMP
NEC — NATIONAL ELECTRICAL CODE GROUNDING 
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING 
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC 
SERVICE 
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
19. An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, or where it can fall into such power...

5
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that...

6
Standard Accessories
Check you have all the items shown.
 Remote Control(TZZ00000005A) Batteries (AAA) x 2(392GB1TX1A32GP)
 Neck and Base(Neck:X34T0059AFL01L0100Base:X34T0060AFL01L01BA)
 Screws x 3 (Assembly screws for neck and base)(0Q1G 940 18 47 CR3)
 Power Cord(089G202A15N HL/089G202A15N JR)
Attaching the Pedestal
Warning
Do not disassemble or modify the pedestal.•	Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that...

7
Installing Pedestal
1. Place the LCD TV screen facing down on a flat surface place where maintained with soft materials (such as a blanket) for protecting the display screen.2. Use the assembly screw to fasten the neck to the base securely.
3. Use only the supplied assembly screws to fasten the pedestal securely to the TV.
Uninstalling Pedestal
1. Place the LCD TV screen facing down on a flat surface place where maintained with soft materials (such as a blanket) for protecting the display screen.2....

8
PART NAMES AND FUNCTIONS
TV Controls/ Indicators
3
4
5
6
7
12
1 Remote Control Signal Receiver•	Do not place any objects between the TV remote control signal receiver and remote control.2 Power indicator On: Power indicator lights Red. Standby: Power indicator turns off.3 VOL +/-•	Used to change volume.•	Used to adjust the value of the selected item on On-Screen Menu.4 CH a/b
•	Used to change channels.•	Used to select item on On-Screen Menu.5 MENU•	Open or close the On-Screen Menu.6 INPUT/OK•	Use to...

9
Connections
Computer Connection
Cable used for connection (This cable is not supplied with this LCD T V. )•	PC/VGA Cable (D-SUB 15pin)•	Audio Cable
Note:When connecting the cable, AC Power Cords of both LCD TV and external equipment should be disconnected from AC outlet. Turn LCD TV and peripheral equipment on before your computer is switched on.
Note:You can connect the DVI source to HDMI input terminal by using the DVI to HDMI converter then connect audio input to PC audio input terminal .
Video...

10
AC Power Cord Connection
This LCD TV uses nominal input voltages of 110-127V AC.It is designed to work with single-phase power systems. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure the type of power being supplied.Connect the LCD TV with all peripheral equipment before turning the LCD TV on.
Caution
•	For safety, unplug AC power cord when the LCD TV is not in use.
Antenna or Cable Connection...