Home > Panasonic > Projector > Panasonic LCD Projector Pt Vx41 Operating Instructions

Panasonic LCD Projector Pt Vx41 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic LCD Projector Pt Vx41 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Manual PC adjust
    ENGLISH - 41
    Settings
    Manual PC adjust
    Select [PC adjust] from the Main Menu (see 
    “Navigating through the menu” on page 35), 
    then select the item from the sub-menu.
    Remote ControlControl Panel
    Some computers employ special signal formats 
    which may not be tuned by Multi-scan system of this 
    projector.  Manual PC adjustment enables you to 
    precisely adjust several parameters to match those 
    signal formats. The projector has 10 independent 
    memory areas to store those parameters manually 
    adjusted. It allows you to recall the setting for a 
    specific computer.
    Fine sync
    Press ▲▼ to select [Fine sync].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the value.3 ) 
    The value can be adjusted from 0 to 31. z
    Total dots
    Press ▲▼ to select [Total dots].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the value.3 ) 
    Horizontal
    Press ▲▼ to select [Horizontal].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the horizontal 3 ) 
    picture position.
    For horizontal (right and left)  J
    adjustment
    OperationAdjustment
    Press ◄.
    The picture 
    position 
    moves to the 
    right.
    Press ►.
    The picture 
    position 
    moves to the 
    left.
    Vertical
    Press ▲▼ to select [Vertical].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the vertical picture 3 ) 
    position.
    For vertical (up and down)  J
    adjustment
    OperationAdjustment
    Press ►.
    The picture 
    position 
    moves up.
    Press ◄.
    The picture 
    position 
    moves down. 
    						
    							Manual PC adjust
    42 - ENGLISH
    Settings
    Current mode
    Press ▲▼ to select [Current mode].1 ) 
    Press ► or the  button 2 ) 
    to enter the next submenu to show 
    H-sync freq. and V-sync freq. of the 
    connected computer.
    Clamp
    Press ▲▼ to select [Clamp].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the clamp level.3 ) 
    When the image has dark bars, try this  z
    adjustment.
    Display area H
    Press ▲▼ to select [Display area H].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the horizontal area 3 ) 
    displayed by this projector.
    Display area V
    Press ▲▼ to select [Display area V].1 ) 
    Press the  button to display 2 ) 
    the dialog box.
    Press ◄► to adjust the vertical area 3 ) 
    displayed by this projector.
    Reset
    To reset the adjusted data, all adjustments will return 
    to their previous figures.
    Press ▲▼ to select [Reset].1 ) 
    Press the  button.2 ) 
    A confirmation box appears and then select [Yes]. z 
    Mode free
    Press ▲▼ to select [Mode free].1 ) 
    Press ► or the  button to 2 ) 
    enter the next submenu.
    Move the highlight to the mode that you want to  z
    clear and then press the  button. 
    A confirmation box appears and then select [Yes]. z
    Store
    Press ▲▼ to select [Store].1 ) 
    Press ► or the  button to 2 ) 
    enter the next submenu.
    Move the highlight to one of the Modes 1 to 10  z
    in which you want to store, and then press the 
     button. 
    A confirmation box appears and then select [Yes]. z 
    						
    							ENGLISH - 43
    Settings
    Image select 
    Select [Image select] from the Main Menu (see 
    “Navigating through the menu” on page 35), 
    then select the item from the sub-menu.
    Remote ControlControl Panel
    Dynamic
    For viewing pictures in a bright room.
    Press ▲▼ to select [Dynamic] and then 
    press the  button.
    Standard
    Normal picture mode preset on the projector.
    Press ▲▼ to select [Standard] and then 
    press the  button.
    Real
    Picture mode with improved halftone for graphics. 
    Press ▲▼ to select [Real] and then press 
    the  button.
    Cinema
    Picture mode adjusted with fine tone.
    Press ▲▼ to select [Cinema] and then 
    press the  button.
    Blackboard(Green)
    For the image projected on a blackboard.
    Press ▲▼ to select [Blackboard(Green)] 
    and then press the  button.
    This mode helps enhance the image projected  z
    on a blackboard. This is mainly effective on a 
    green colored board, not truly effective on a 
    black colored board.
    Colorboard
    For the image projected on a colorboard.
    Press ▲▼ to select [Colorboard].1 ) 
    Press ► or the  button to 2 ) 
    display the submenu.
    At the time of simple projection on the colored  z
    wall, you can get the close color image to the 
    color image projected on a white screen by 
    selecting the similar color to the wall color from 
    the preset four colors.
    Image 1-4
    For viewing with the user preset image mode in the 
    Image adjust Menu. This Image memory is provided 
    in each computer, component and video input source.
    Press ▲▼ to select [Image 1-4] and then 
    press the  button.  
    						
    							Image adjust
    44 - ENGLISH
    Settings
    Select [Image adjust] from the Main Menu (see 
    “Navigating through the menu” on page 35), 
    then select the item from the sub-menu.
    Remote ControlControl Panel
    Note
    Make sure you selected [Store] after adjusting 
    settings. Some settings can not be stored if not 
    registered with [Store] function.
    Contrast
    Press ▲▼ to select [Contrast].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the setting value.3 ) 
    OperationAdjustmentAdjustment 
    range
    Press ►.increase the contrastMaximum 
    value 63
    Press ◄.decrease the 
    contrast
    Minimum 
    value 0
    Brightness
    Press ▲▼ to select [Brightness].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the setting value.3 ) 
    OperationAdjustmentAdjustment 
    range
    Press ►.increase the 
    brightness
    Maximum 
    value 63
    Press ◄.decrease the 
    brightness
    Minimum 
    value 0
    Color
    Press ▲▼ to select [Color].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the setting value.3 ) 
    OperationAdjustmentAdjustment 
    range
    Press ►.increase the 
    intensity of the color
    Maximum 
    value 63
    Press ◄.decrease the 
    intensity of the color
    Minimum 
    value 0
    Note
    When input video signal to the projector, [Color] will be  z
    available.
    Tint 
    Press ▲▼ to select [Tint].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the tint value to 3 ) 
    get a proper color balance.
    Adjustments can be made between z 0 and 63.
    Note
    When you select [NTSC] or [NTSC4.43] in System menu  z
    under Video input signal, [Tint] will be available.
    Color temp.
    Press ▲▼ to select [Color temp.].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to select the desired Color 3 ) 
    temp. level.
    You can select the desired [Color temp.] from  z
    [XLow], [Low], [Mid] or [High].
    Note
    [Color temp.] level displays [Blackbord] or [Colorboard]  z
    when the [Blackboard(Green)] or [Colorboard] is selected 
    in the [Image select] menu.
    Image adjust 
    						
    							Image adjust
    ENGLISH - 45
    Settings
    Red 
    Press ▲▼ to select [Red].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the setting value.3 ) 
    OperationAdjustmentAdjustment 
    range
    Press ►.deepen red toneMaximum 
    value 63
    Press ◄.lighten red toneMinimum 
    value 0
    Green
    Press ▲▼ to select [Green].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the setting value.3 ) 
    OperationAdjustmentAdjustment 
    range
    Press ►.deepen green 
    tone
    Maximum 
    value 63
    Press ◄.lighten green 
    tone
    Minimum 
    value 0
    Blue 
    Press ▲▼ to select [Blue].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the setting value.3 ) 
    OperationAdjustmentAdjustment 
    range
    Press ►.deepen blue toneMaximum 
    value 63
    Press ◄.lighten blue toneMinimum 
    value 0
    Sharpness
    Press ▲▼ to select [Sharpness].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the setting value.3 ) 
    OperationAdjustmentAdjustment 
    range
    Press ►.
    increase the 
    sharpness of the 
    image
    Maximum 
    value 15
    Press ◄.
    decrease the 
    sharpness of the 
    image
    Minimum 
    value 0
    Gamma
    Press ▲▼ to select [Gamma].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to adjust the gamma value 3 ) 
    to obtain a better balance of contrast.
    Adjustments can be made between z 0 and 15.
    Noise reduction
    Press ▲▼ to select [Noise reduction].1 ) 
    Press the  button to display 2 ) 
    the adjustment dialog box.
    Press ◄► to select the desired item3 ) 
    OffDisabled
    L1Lower reduction
    L2Higher reduction
    Noise interference on the screen can be  z
    reduced. Select one of the above options to get 
    smoother images.
    [Noise reduction] cannot be selected when  z
    [480p], [576p], [720p], [1 035i] or [1 080i] is 
    selected.
    Note
    When input video signal to the projector, [Noise  z
    reduction] will become available. 
    						
    							Image adjust
    46 - ENGLISH
    Settings
    Progressive
    Press ▲▼ to select [Progressive].1 ) 
    Press the  button to display 2 ) 
    the dialog box.
    Press ◄► to select the desired item.3 ) 
    An interlaced video signal can be displayed in  z
    progressive mode. Select one of the following 
    options.
    [Progressive] cannot be selected when [480p],  z
    [576p], [720p], [1 035i] or [1 080i] is selected.
    OffDisabled
    L 1For an active picture
    L 2For a still picture
    FilmFor watching a film
    Note
    When input video signal to the projector, [Progressive]  z
    will become available.
    Reset
    To reset the adjusted data, all adjustments will return 
    to their previous figures.
    Press ▲▼ to select [Reset].1 ) 
    Press the  button.2 ) 
    A confirmation box appears and then select [Yes]. z 
    Store
    Press ▲▼ to select [Store].1 ) 
    Press ► or the  button.2 ) 
    Press ▲▼ to select one from Image 1 3 ) 
    to 4 and press the  button.
    A confirmation box appears and then select [Yes]. z  
    						
    							Screen 
    ENGLISH - 47
    Settings
    Screen 
    Select [Screen] from the Main Menu (see 
    “Navigating through the menu” on page 35), 
    then select the item from the sub-menu.
    Remote ControlControl Panel
    Normal
    Provide the image to fit the screen size while 
    maintaining the aspect ratio of the input signal.
    Press ▲▼ to select [Normal] and then 
    press the  button.
    Full 
    Provide the full screen image.
    Press ▲▼ to select [Full] and then press 
    the  button.
    Wide(16:9)
    Provide the image at the 16:9 wide screen ratio.
    Press ▲▼ to select [Wide(16:9)] and then 
    press the  button.
    Zoom
    Scale the image proportionally to fit the entire screen. 
    Either side of image may go over the screen.
    Press ▲▼ to select [Zoom] and then 
    press the  button.
    True 
    Provide the image in its original size. When the 
    original image size is larger than the panel size (1 
    024 x 768), the projector enters to the panning mode 
    automatically.
    Press ▲▼ to select [True] and then 1 ) 
    press the  button.
    Press ▲▼◄► to pan the image.2 ) 
    When adjusted, the arrows will turn red. When  z
    reached to the correction limits, the arrows will 
    disappear.
    Note
    When input computer signal to the projector, [True] will  z
    be available.
    [True] is disabled and cannot be displayed when [480i],  z
    [576i], [480p], [576p], [720p], [1 035i] or [1 080i] is 
    selected in the PC System Menu.
    When [True] is selected in the Screen menu, [Digital  z
    zoom +/-] can not be selected.
    Custom
    Provide the last stored aspect screen image.
    Press ▲▼ to select [Custom] and press 
    the  button.  
    						
    							48 - ENGLISH
    Settings
    Custom adj.
    Adjust the screen scale and position manually with 
    this function.
    Press ▲▼ to select [Custom adj.].1 ) 
    Press ► or the  button to 2 ) 
    enter the next submenu.
    Press ▲▼ to choose the item you 3 ) 
    want to adjust.
    You can choose one from the items as below: z
    Scale H/VAdjust the Horizontal/Vertical screen 
    scale.
    H&VWhen set to [On], the aspect ratio is 
    fixed.
    Position H/VAdjust the Horizontal/Vertical screen 
    position.
    CommonSave the adjusted scale or position 
    to all the inputs.
    ResetReset the all adjusted values.
    Digital zoom +
    Zoom in the images.
    Press ▲▼ to select [Digital zoom +] 1 ) 
    and then press the  button.
    The On-Screen Menu disappears and  z
     [D. zoom + ] appears.
    Press the  button to zoom in 2 ) 
    the image size and press ▲▼ ◄► to 
    move the image to the top/bottom/left/
    right of the screen.
    The Panning function can work only when the  z
    image is larger than the screen size. A projected 
    image can be also expanded by pressing the 
     or the  button.
    Digital zoom -
    Zoom out the images.
    Press ▲▼ to select [Digital zoom -] 1 ) 
    and then press the  button.
    The On-Screen Menu disappears and   z
    [D.zoom - ] appears.
    Press the  button to zoom 2 ) 
    out image size.
    The projected image can be also compressed  z
    by pressing the  or the 
     button.
    To exit the Digital zoom +/– mode, press any button 
    except the ,  and 
    ▲▼◄► buttons.
    To return to the previous screen size, select a screen 
    size from the Screen Size Adjustment Menu or select 
    an input source from the Input Source Selection Menu 
    (Æpage 38) again, or adjust the screen size with the 
     buttons.
    Note
    When input computer signal to the projector, this function  z
    will be available.
    [Digital zoom +/-] cannot be selected when [True] is  z
    selected in the Screen aspect.
    [Digital zoom +/–] are disabled and cannot be displayed  z
    when [480i], [576i], [480p], [576p], [720p], [1 035i] or  
    [1 080i] is selected in the PC System Menu (Æpage 38).
    When [Digital zoom +/–] functions are disabled,  z
    mark will appear.
    Keystone
    This function is used to adjust keystone distortion of 
    the projected image.
    Press ▲▼ to select [Keystone].1 ) 
    Press ► or the  button.2 ) 
    Press ▲▼ to choose the item you 3 ) 
    want to adjust.
    KeystoneTo correct keystone distortion
    StoreTo store or reset the keystone 
    correction
    Store
    Keep the keystone correction even 
    when the AC power cord is plugged 
    out or turned off the projector. 
    Reset
    Release the keystone correction 
    when the AC power cord is plugged 
    out. 
    Screen 
    The following items are the 
    submenus of [Store]. 
    						
    							ENGLISH - 49
    Settings
    Ceiling
    This function is used to project the image from a 
    ceiling-mounted projector.
    Press ▲▼ to select [Ceiling] and then 1 ) 
    press the  button.
    Press ▲▼ to change the image.2 ) 
    When this function is set to [On], the picture will  z
    be top/bottom and left/right reversed.
    Rear
    This function is used to project the image from rear of 
    the screen.
    Press ▲▼ to select [Rear] and then 1 ) 
    press the  button.
    Press ▲▼ to change the image.2 ) 
    When this function is set to [On], the picture will  z
    be left/right reversed.
    Reset
    To reset the adjusted data, all adjustments will return 
    to their previous figures.
    Press ▲▼ to select [Reset] and then 
    press the  button.
    A confirmation box appears and then select  z
    [Yes].
    Screen  
    						
    							Sound
    50 - ENGLISH
    Settings
    Sound
    Select [Sound] from the Main Menu (see 
    “Navigating through the menu” on page 35), 
    then select the item from the sub-menu.
    Remote ControlControl Panel
    Volume
    Press ▲▼ to select [Volume] and then 1 ) 
    Press the  button.
    Press ◄► to adjust the volume.2 ) 
    Press  button to set the volume. z
    OperationAdjustmentAdjustment 
    range
    Press ►.turn up the 
    volume
    Maximum 
    value 63
    Press ◄.turn down the 
    volume
    Minimum 
    value 0
    You can also press  buttons on  z
    the remote control or control panel to adjust the 
    volume.
    Mute
    Press ▲▼ to select [Mute] and then 1 ) 
    Press the  button.
    Press the  button to switch 2 ) 
    the mute function [On]/[Off].
    Press the  button on the remote  z
    control to temporarily turn off the sound. To turn 
    the sound back on, press the  button 
    again or press the  buttons.
    MIC 
    Press ▲▼ to select [MIC] and then 1 ) 
    Press the  button.
    Press ▲▼ to switch the [MIC] function 2 ) 
    [On]/[Off].
    When [Off] is selected in [MIC] function, the [MIC  z
    gain] and [Standby MIC out] functions are not 
    available.
    Connect the computer 2 audio input signals to  z
    COMPUTER AUDIO IN 1 terminal as Sound 
    function is set to Computer 2 and MIC function 
    is turned on.
    If the [MIC] function is turned on when  z
    connecting PC audio to the AUDIO IN (a mini 
    jack), loud sound may be output suddenly 
    depending on the setting value of [MIC gain].
    MIC gain
    Press ▲▼ to select [MIC gain] and 1 ) 
    then Press the  button.
    Press ◄► to adjust the MIC mixing 2 ) 
    gain.
    Press  button to set the [MIC gain]. z
    OperationAdjustmentAdjustment 
    range
    Press ►.turn up the MIC 
    mixing gain
    Maximum 
    value 63
    Press ◄.turn down the  
    MIC mixing gain
    Minimum 
    value 0
    Standby MIC out
    Press ▲▼ to select [Standby MIC out]1 ) 
    and then Press the  button.
    Press ▲▼ to switch the [Standy MIC 2 ) 
    out] function [On]/[Off].
    When setting the [Standby MIC out] function   z
    to [On] and in Standby mode status, only 
    [MIC] input volume can be output. Press the 
     buttons on the control panel or 
    on the remote control to adjust the MIC input 
    volume. 
    Only the Standby mode is set to [Network],  z
    [Standby MIC out] can be selected. 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic LCD Projector Pt Vx41 Operating Instructions