Panasonic LCD Projector Pt Tw342 Operating Instructions
Here you can view all the pages of manual Panasonic LCD Projector Pt Tw342 Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
ENGLISH - 61
[Keystone]
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select one item.
[Keystone] Sets whether or not to keep the keystone correction after turn off the projector or plug out
the power cord.
[H/V Keystone] Adjusts when the horizontal or vertical trapezoid of the projected image is distorted.
[Corner...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-60.png "Page 61
ENGLISH - 61
[Keystone]
You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select one item.
[Keystone] Sets whether or not to keep the keystone correction after turn off the projector or plug out
the power cord.
[H/V Keystone] Adjusts when the horizontal or vertical trapezoid of the projected image is distorted.
[Corner...")
ENGLISH - 61 [Keystone] You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted. 1) Press as to select [Keystone]. 2) Press the button. f The [Keystone] screen is displayed. 3) Press as to select one item. [Keystone] Sets whether or not to keep the keystone correction after turn off the projector or plug out the power cord. [H/V Keystone] Adjusts when the horizontal or vertical trapezoid of the projected image is distorted. [Corner...
Page 62
![Page 62
62 - ENGLISH
Note
f The white arrows indicate that there is no correction.
f A red arrow indicates the direction of correction.
f An arrow disappears at the maximum correction.
[Corner correction]
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [Corner correction].
4) Press the button.
f The Corner correction arrows are displayed on the upper left corner of the projected image.
5) Press asqw to adjust.
[Corner...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-61.png "Page 62
62 - ENGLISH
Note
f The white arrows indicate that there is no correction.
f A red arrow indicates the direction of correction.
f An arrow disappears at the maximum correction.
[Corner correction]
1) Press as to select [Keystone].
2) Press the button.
f The [Keystone] screen is displayed.
3) Press as to select [Corner correction].
4) Press the button.
f The Corner correction arrows are displayed on the upper left corner of the projected image.
5) Press asqw to adjust.
[Corner...")
62 - ENGLISH Note f The white arrows indicate that there is no correction. f A red arrow indicates the direction of correction. f An arrow disappears at the maximum correction. [Corner correction] 1) Press as to select [Keystone]. 2) Press the button. f The [Keystone] screen is displayed. 3) Press as to select [Corner correction]. 4) Press the button. f The Corner correction arrows are displayed on the upper left corner of the projected image. 5) Press asqw to adjust. [Corner...
Page 63
![Page 63
ENGLISH - 63
[Curved
correction X
Offset]Press the w button.
Used to correct the right side vertical
lines. Extend the top and bottom while
keeping the center part as it is.
Press the q button.Used to correct the left side vertical
lines. Extend the top and bottom while
keeping the center part as it is.
Press the a button. Used to correct the both sides of the
vertical lines. Extend the lower corners
while keeping the center part and the
upper part as they are.
Press the s button.Used to...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-62.png "Page 63
ENGLISH - 63
[Curved
correction X
Offset]Press the w button.
Used to correct the right side vertical
lines. Extend the top and bottom while
keeping the center part as it is.
Press the q button.Used to correct the left side vertical
lines. Extend the top and bottom while
keeping the center part as it is.
Press the a button. Used to correct the both sides of the
vertical lines. Extend the lower corners
while keeping the center part and the
upper part as they are.
Press the s button.Used to...")
ENGLISH - 63 [Curved correction X Offset]Press the w button. Used to correct the right side vertical lines. Extend the top and bottom while keeping the center part as it is. Press the q button.Used to correct the left side vertical lines. Extend the top and bottom while keeping the center part as it is. Press the a button. Used to correct the both sides of the vertical lines. Extend the lower corners while keeping the center part and the upper part as they are. Press the s button.Used to...
Page 64
![Page 64
64 - ENGLISH
3) Press as to switch the item.
f The items will switch each time you press the button.
[Logo select] Set the logo display when the projector start-up.
[Capture] The projected image is captured as a still image. The captured image will be displayed as the
startup logo when [Logo select] is set to [User].
[Logo PIN code lock] Set and change the Logo PIN code, and prevents an unauthorized person from changing the PIN
code.
[Logo PIN code change] Change the [Logo PIN code].
[Logo select]...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-63.png "Page 64
64 - ENGLISH
3) Press as to switch the item.
f The items will switch each time you press the button.
[Logo select] Set the logo display when the projector start-up.
[Capture] The projected image is captured as a still image. The captured image will be displayed as the
startup logo when [Logo select] is set to [User].
[Logo PIN code lock] Set and change the Logo PIN code, and prevents an unauthorized person from changing the PIN
code.
[Logo PIN code change] Change the [Logo PIN code].
[Logo select]...")
64 - ENGLISH 3) Press as to switch the item. f The items will switch each time you press the button. [Logo select] Set the logo display when the projector start-up. [Capture] The projected image is captured as a still image. The captured image will be displayed as the startup logo when [Logo select] is set to [User]. [Logo PIN code lock] Set and change the Logo PIN code, and prevents an unauthorized person from changing the PIN code. [Logo PIN code change] Change the [Logo PIN code]. [Logo select]...
Page 65
![Page 65
ENGLISH - 65
4) Press the button.
f The [Logo PIN code] input screen is displayed.
5) Press the button.
6) Enter the Logo PIN code you have set according to the steps in "Enter a \
Logo PIN code".
r Enter a Logo PIN code
i) Press as to select a number from 0 to 9.
ii) Press the button.
f The fixed number change to , the cursor move to the next digit.
iii) Repeat the above steps, and enter a three-digit number.
f Move the cursor to [Set] after fixing the three-digit number.
iv)...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-64.png "Page 65
ENGLISH - 65
4) Press the button.
f The [Logo PIN code] input screen is displayed.
5) Press the button.
6) Enter the Logo PIN code you have set according to the steps in \"Enter a \
Logo PIN code\".
r Enter a Logo PIN code
i) Press as to select a number from 0 to 9.
ii) Press the button.
f The fixed number change to , the cursor move to the next digit.
iii) Repeat the above steps, and enter a three-digit number.
f Move the cursor to [Set] after fixing the three-digit number.
iv)...")
ENGLISH - 65 4) Press the button. f The [Logo PIN code] input screen is displayed. 5) Press the button. 6) Enter the Logo PIN code you have set according to the steps in "Enter a \ Logo PIN code". r Enter a Logo PIN code i) Press as to select a number from 0 to 9. ii) Press the button. f The fixed number change to , the cursor move to the next digit. iii) Repeat the above steps, and enter a three-digit number. f Move the cursor to [Set] after fixing the three-digit number. iv)...
Page 66
![Page 66
66 - ENGLISH
3) Press as to switch the item.
f The items will switch each time you press the button.
[PIN code lock] The [PIN code] screen will be displayed when turn on the projector
. The projector cannot be
operated without entering the PIN code.
[PIN code change] Change the PIN code.
Attention
f The initial PIN code is "111".
f Change the PIN code periodically that is hard to guess.
[PIN code lock]
Set the PIN code (three-digit).
1) Press as to select [Security].
2) Press the...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-65.png "Page 66
66 - ENGLISH
3) Press as to switch the item.
f The items will switch each time you press the button.
[PIN code lock] The [PIN code] screen will be displayed when turn on the projector
. The projector cannot be
operated without entering the PIN code.
[PIN code change] Change the PIN code.
Attention
f The initial PIN code is \"111\".
f Change the PIN code periodically that is hard to guess.
[PIN code lock]
Set the PIN code (three-digit).
1) Press as to select [Security].
2) Press the...")
66 - ENGLISH 3) Press as to switch the item. f The items will switch each time you press the button. [PIN code lock] The [PIN code] screen will be displayed when turn on the projector . The projector cannot be operated without entering the PIN code. [PIN code change] Change the PIN code. Attention f The initial PIN code is "111". f Change the PIN code periodically that is hard to guess. [PIN code lock] Set the PIN code (three-digit). 1) Press as to select [Security]. 2) Press the...
Page 67
![Page 67
ENGLISH - 67
7) Enter the New PIN code according to the steps in "Enter a PIN code".
[Power management]
This function optimizes lamp power according to the operating status to reduce power consumption.
[Power management]
Set the operation as following if there is no signal input.
1) Press as to select [Power management].
2) Press the button.
f The [Power management] screen is displayed.
3) Press as to switch the item.
f The items will switch each time you press the button.
[Ready] The...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-66.png "Page 67
ENGLISH - 67
7) Enter the New PIN code according to the steps in \"Enter a PIN code\".
[Power management]
This function optimizes lamp power according to the operating status to reduce power consumption.
[Power management]
Set the operation as following if there is no signal input.
1) Press as to select [Power management].
2) Press the button.
f The [Power management] screen is displayed.
3) Press as to switch the item.
f The items will switch each time you press the button.
[Ready] The...")
ENGLISH - 67 7) Enter the New PIN code according to the steps in "Enter a PIN code". [Power management] This function optimizes lamp power according to the operating status to reduce power consumption. [Power management] Set the operation as following if there is no signal input. 1) Press as to select [Power management]. 2) Press the button. f The [Power management] screen is displayed. 3) Press as to switch the item. f The items will switch each time you press the button. [Ready] The...
Page 68
![Page 68
68 - ENGLISH
[Filter counter]Displays the using time of the filter.
[Timer] Sets the time to display the warning
icon.
[Filter counter reset] Resets the filter counter.
Setting [Timer]
If you want to clean the air filter periodically according to the operating environment, the filter warning icon [ ]
can be displayed on the projected screen.
1) Press as to select [Timer].
2) Press the button.
3) Press as to switch the setting of the time.
f The items will switch each time you press the...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-67.png "Page 68
68 - ENGLISH
[Filter counter]Displays the using time of the filter.
[Timer] Sets the time to display the warning
icon.
[Filter counter reset] Resets the filter counter.
Setting [Timer]
If you want to clean the air filter periodically according to the operating environment, the filter warning icon [ ]
can be displayed on the projected screen.
1) Press as to select [Timer].
2) Press the button.
3) Press as to switch the setting of the time.
f The items will switch each time you press the...")
68 - ENGLISH [Filter counter]Displays the using time of the filter. [Timer] Sets the time to display the warning icon. [Filter counter reset] Resets the filter counter. Setting [Timer] If you want to clean the air filter periodically according to the operating environment, the filter warning icon [ ] can be displayed on the projected screen. 1) Press as to select [Timer]. 2) Press the button. 3) Press as to switch the setting of the time. f The items will switch each time you press the...
Page 69
![Page 69
ENGLISH - 69
[Network setting]
1) Press as to select [Network].
2) Press the button.
f The [Network] screen is displayed.
3) Press the button.
f The [Network setting] screen is displayed.
4) Press as to select an item, and change the setting according to the instructions\
.
[DHCP] [On]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[Off]: If a DHCP server does not exist in the network to which the projector is...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-68.png "Page 69
ENGLISH - 69
[Network setting]
1) Press as to select [Network].
2) Press the button.
f The [Network] screen is displayed.
3) Press the button.
f The [Network setting] screen is displayed.
4) Press as to select an item, and change the setting according to the instructions\
.
[DHCP] [On]:
If a DHCP server exists in the network to which the projector is connected,
the IP address will automatically be acquired.
[Off]: If a DHCP server does not exist in the network to which the projector is...")
ENGLISH - 69 [Network setting] 1) Press as to select [Network]. 2) Press the button. f The [Network] screen is displayed. 3) Press the button. f The [Network setting] screen is displayed. 4) Press as to select an item, and change the setting according to the instructions\ . [DHCP] [On]: If a DHCP server exists in the network to which the projector is connected, the IP address will automatically be acquired. [Off]: If a DHCP server does not exist in the network to which the projector is...
Page 70
![Page 70
70 - ENGLISH
4) Press the button.
f [Remote control] is set.
Note
f To specify an ID number for individual control, the ID number of a remote\
control must match the ID number of the projector.
f When the ID number is set to [ALL], the projector will operate regardless of the ID number specified by remote control. If
multiple projectors are set up side by side with ID set to [ALL], they cannot be controlled separately from the projectors with
other ID numbers.
f Refer to "Setting the...](http://img.usermanuals.tech/thumb/58/75998/w300_pt-tw342_en_om_d-69.png "Page 70
70 - ENGLISH
4) Press the button.
f [Remote control] is set.
Note
f To specify an ID number for individual control, the ID number of a remote\
control must match the ID number of the projector.
f When the ID number is set to [ALL], the projector will operate regardless of the ID number specified by remote control. If
multiple projectors are set up side by side with ID set to [ALL], they cannot be controlled separately from the projectors with
other ID numbers.
f Refer to \"Setting the...")
70 - ENGLISH 4) Press the button. f [Remote control] is set. Note f To specify an ID number for individual control, the ID number of a remote\ control must match the ID number of the projector. f When the ID number is set to [ALL], the projector will operate regardless of the ID number specified by remote control. If multiple projectors are set up side by side with ID set to [ALL], they cannot be controlled separately from the projectors with other ID numbers. f Refer to "Setting the...