Panasonic LCD Projector PT-LB3 Network Operation Manual
Here you can view all the pages of manual Panasonic LCD Projector PT-LB3 Network Operation Manual. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
![Page 11
11
Using WebBrowser (cont.)
Monitor information window
This page indicates the projector status.
To access this page from other pages, click [Status] in the main menu (a\
t the left of the window).
Projector status
„
On this window, click the [Projector status] tab.
Network status
„
On this window, click the [Network status] tab.
The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [V iew] →
[Refresh].
If [SELF TEST Error...](http://img.usermanuals.tech/thumb/58/75966/w300_pt-lb3_en_om_d-10.png "Page 11
11
Using WebBrowser (cont.)
Monitor information window
This page indicates the projector status.
To access this page from other pages, click [Status] in the main menu (a\
t the left of the window).
Projector status
„
On this window, click the [Projector status] tab.
Network status
„
On this window, click the [Network status] tab.
The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [V iew] →
[Refresh].
If [SELF TEST Error...")
11 Using WebBrowser (cont.) Monitor information window This page indicates the projector status. To access this page from other pages, click [Status] in the main menu (a\ t the left of the window). Projector status „ On this window, click the [Projector status] tab. Network status „ On this window, click the [Network status] tab. The monitor information is refreshed at fixed intervals, but the current exact information can be checked by clicking [V iew] → [Refresh]. If [SELF TEST Error...
Page 12
![Page 12
12
Using WebBrowser (cont.)
Projector control window
You can make various projector settings.
If you migrate from other page, click [Projector control] in the main me\
nu (at the left of the window).
Basic control window
„
On this window, click the [Basic control] tab.
Advanced control window
„
On this window, click the [Advanced control] tab.
Connection with the projector may not be possible immediately after the \
power is turned on. In this case wait a bit and then
make the connection...](http://img.usermanuals.tech/thumb/58/75966/w300_pt-lb3_en_om_d-11.png "Page 12
12
Using WebBrowser (cont.)
Projector control window
You can make various projector settings.
If you migrate from other page, click [Projector control] in the main me\
nu (at the left of the window).
Basic control window
„
On this window, click the [Basic control] tab.
Advanced control window
„
On this window, click the [Advanced control] tab.
Connection with the projector may not be possible immediately after the \
power is turned on. In this case wait a bit and then
make the connection...")
12 Using WebBrowser (cont.) Projector control window You can make various projector settings. If you migrate from other page, click [Projector control] in the main me\ nu (at the left of the window). Basic control window „ On this window, click the [Basic control] tab. Advanced control window „ On this window, click the [Advanced control] tab. Connection with the projector may not be possible immediately after the \ power is turned on. In this case wait a bit and then make the connection...
Page 13
![Page 13
13
Using WebBrowser (cont.)
3
Complete the detailed settings and click [Next].
When [Next] is clicked, the next page appears, enabling you to
complete the detailed settings as desired.
After all required items have been entered, a confirmation window
appears.
Click [Submit].
4 The settings will be registered.
If you have changed the LAN settings that are currently in use, the conn\
ection may break off.
Adjust clock
„
Click [Detailed set up] →...](http://img.usermanuals.tech/thumb/58/75966/w300_pt-lb3_en_om_d-12.png "Page 13
13
Using WebBrowser (cont.)
3
Complete the detailed settings and click [Next].
When [Next] is clicked, the next page appears, enabling you to
complete the detailed settings as desired.
After all required items have been entered, a confirmation window
appears.
Click [Submit].
4 The settings will be registered.
If you have changed the LAN settings that are currently in use, the conn\
ection may break off.
Adjust clock
„
Click [Detailed set up] →...")
13 Using WebBrowser (cont.) 3 Complete the detailed settings and click [Next]. When [Next] is clicked, the next page appears, enabling you to complete the detailed settings as desired. After all required items have been entered, a confirmation window appears. Click [Submit]. 4 The settings will be registered. If you have changed the LAN settings that are currently in use, the conn\ ection may break off. Adjust clock „ Click [Detailed set up] →...
Page 14
![Page 14
14
Using WebBrowser (cont.)
E-mail set up
„
You can specify two email recipients.
Click [Detailed set up] → [E-mail set up] in the menu.
[MAIL SERVER]
•
ENABLE : Enable or disable email transmission.
SMTP SERVER NAME : Enter the SMTP server name.
[MAIL OPTION]
•
MAIL FROM : Enter the sender’s email address.
MEMO : Enter a description of the sender.
[TEMPERATURE WARNING SET UP]
•
MINIMUM TIME : Enter the interval for sending email.
INPUT AIR TEMPERATURE :Select the temperature of the intake...](http://img.usermanuals.tech/thumb/58/75966/w300_pt-lb3_en_om_d-13.png "Page 14
14
Using WebBrowser (cont.)
E-mail set up
„
You can specify two email recipients.
Click [Detailed set up] → [E-mail set up] in the menu.
[MAIL SERVER]
•
ENABLE : Enable or disable email transmission.
SMTP SERVER NAME : Enter the SMTP server name.
[MAIL OPTION]
•
MAIL FROM : Enter the sender’s email address.
MEMO : Enter a description of the sender.
[TEMPERATURE WARNING SET UP]
•
MINIMUM TIME : Enter the interval for sending email.
INPUT AIR TEMPERATURE :Select the temperature of the intake...")
14 Using WebBrowser (cont.) E-mail set up „ You can specify two email recipients. Click [Detailed set up] → [E-mail set up] in the menu. [MAIL SERVER] • ENABLE : Enable or disable email transmission. SMTP SERVER NAME : Enter the SMTP server name. [MAIL OPTION] • MAIL FROM : Enter the sender’s email address. MEMO : Enter a description of the sender. [TEMPERATURE WARNING SET UP] • MINIMUM TIME : Enter the interval for sending email. INPUT AIR TEMPERATURE :Select the temperature of the intake...
Page 15
![Page 15
15
Using WebBrowser (cont.)
Example of email message sent
If [NORMAL] is selected under [MAIL CONTENTS]
„
`rvny $[| $ $ $ $ $ $ $ $ $ $ $ $ $ $ $G $Q?@ABCDNO $
aRZ]R_Nab_R $dN_[V[T $`Rab] $
V[]ba $NV_ $aRZ]R_Nab_R $ $\ƒr $h $@EP $==S $j $
R__\_ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $\[ $ $j $
V[]ba $NV_ $aRZ]R_Nab_R $ $ $h $\[ $ $j $
]R_V\QVP $_R]\_a $...](http://img.usermanuals.tech/thumb/58/75966/w300_pt-lb3_en_om_d-14.png "Page 15
15
Using WebBrowser (cont.)
Example of email message sent
If [NORMAL] is selected under [MAIL CONTENTS]
„
`rvny $[| $ $ $ $ $ $ $ $ $ $ $ $ $ $ $G $Q?@ABCDNO $
aRZ]R_Nab_R $dN_[V[T $`Rab] $
V[]ba $NV_ $aRZ]R_Nab_R $ $\ƒr $h $@EP $==S $j $
R__\_ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $\[ $ $j $
V[]ba $NV_ $aRZ]R_Nab_R $ $ $h $\[ $ $j $
]R_V\QVP $_R]\_a $...")
15 Using WebBrowser (cont.) Example of email message sent If [NORMAL] is selected under [MAIL CONTENTS] „ `rvny $[| $ $ $ $ $ $ $ $ $ $ $ $ $ $ $G $Q?@ABCDNO $ aRZ]R_Nab_R $dN_[V[T $`Rab] $ V[]ba $NV_ $aRZ]R_Nab_R $ $\ƒr $h $@EP $==S $j $ R__\_ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $h $\[ $ $j $ V[]ba $NV_ $aRZ]R_Nab_R $ $ $h $\[ $ $j $ ]R_V\QVP $_R]\_a $...
Page 16
![Page 16
16
Using WebBrowser (cont.)
Authentication set up
„
Click [Detailed set up] → [Authentication set up] in the menu.
Auth : Change the authentication method as desired.
SMTP Auth : For SMTP authentication, change the
authentication method to use, as desired.
Pop Server name : Enter the POP server name.
User name : Enter the user name for the SMTP or POP server.
Password : Enter the password for the SMTP or POP server.
SMTP server port :
Enter the SMTP server port number.
POP server port : Enter the...](http://img.usermanuals.tech/thumb/58/75966/w300_pt-lb3_en_om_d-15.png "Page 16
16
Using WebBrowser (cont.)
Authentication set up
„
Click [Detailed set up] → [Authentication set up] in the menu.
Auth : Change the authentication method as desired.
SMTP Auth : For SMTP authentication, change the
authentication method to use, as desired.
Pop Server name : Enter the POP server name.
User name : Enter the user name for the SMTP or POP server.
Password : Enter the password for the SMTP or POP server.
SMTP server port :
Enter the SMTP server port number.
POP server port : Enter the...")
16 Using WebBrowser (cont.) Authentication set up „ Click [Detailed set up] → [Authentication set up] in the menu. Auth : Change the authentication method as desired. SMTP Auth : For SMTP authentication, change the authentication method to use, as desired. Pop Server name : Enter the POP server name. User name : Enter the user name for the SMTP or POP server. Password : Enter the password for the SMTP or POP server. SMTP server port : Enter the SMTP server port number. POP server port : Enter the...
Page 17
![Page 17
17
Using PJLink protocol
The projector’s network functions conform to PJLink Class 1 standards, enabling the fo\
llowing operations from a computer using
the PJLink protocol.Setting the projector
•
Querying the projector status•
To use PJLink protocol, turn [ON] the [NETWORK CONTROL] in the NETWORK me\
nu for the projector. (See page 7)
Applicable commands
The following commands are used to control the projector with the PJLink\
protocol.
Command Control details Notes
POWR Power control Parameters
0...](http://img.usermanuals.tech/thumb/58/75966/w300_pt-lb3_en_om_d-16.png "Page 17
17
Using PJLink protocol
The projector’s network functions conform to PJLink Class 1 standards, enabling the fo\
llowing operations from a computer using
the PJLink protocol.Setting the projector
•
Querying the projector status•
To use PJLink protocol, turn [ON] the [NETWORK CONTROL] in the NETWORK me\
nu for the projector. (See page 7)
Applicable commands
The following commands are used to control the projector with the PJLink\
protocol.
Command Control details Notes
POWR Power control Parameters
0...")
17 Using PJLink protocol The projector’s network functions conform to PJLink Class 1 standards, enabling the fo\ llowing operations from a computer using the PJLink protocol.Setting the projector • Querying the projector status• To use PJLink protocol, turn [ON] the [NETWORK CONTROL] in the NETWORK me\ nu for the projector. (See page 7) Applicable commands The following commands are used to control the projector with the PJLink\ protocol. Command Control details Notes POWR Power control Parameters 0...
Page 18
18 Glossary ItemDescriptions Page LAN Abbreviation for Local Area Network. This is a network with a relatively narrow range such as inside a company. 4 DHCP Abbreviation for Dynamic Host Configuration Protocol. This function automatically assigns IP addresses to the connected equipment. If a device with the DHCP server function is present within a LAN, it automatically assigns IP addresses to the connected equipment. 6 IP address Internet Protocol (IP) is a protocol for distributing data, and the ad\...
Page 19
Web Site : http://panasonic.net/avc/projector / © Panasonic Corporation 2011