Panasonic LCD Projector PT-FW300NTU PT-FW300U Operating Instructions

Menu Navigation
ENGLISH - 31
Settings
 PROJECTOR SETUP SECURITY
 NETWORK
DVI-D IN
page 38
DVI EDID
EDID1EDID2(PC)
DVI SIGNAL LEVEL
0-255:PC16-235
CLOSED CAPTION SETTINGpage 38
CLOSED CAPTION
OFFON
MODE
CC1 CC2 CC3 CC4
SCREEN SETTING page 38
SCREEN FORMAT
16:1016:9
SCREEN POSITION
CENTERLOW
HIGH
STARTUP LOGO page 39
ONOFF USER
AUTO SETUPpage 39
AUTOBUTTON
SIGNAL SEARCHpage 39
ONOFF
BACK COLORpage 39
BLUEBLACK
WIDE MODEpage 39
AUTOOFF
ON
SXGA MODE page 39
SXGASXGA+
OTHER FUNCTIONSpage 40
AUTO SETUP FREEZE...

Settings
Menu Navigation
ENGLISH - 32
JDisplaying the Main menu
Press the  MENU button to display the main menu 
and the operating guidance.
J Adjusting with the bar scale 
items
The triangle mark under the bar indicates factory 
default setting and the square indicates the current 
setting.
JReturning to the previous menu
Press the  MENU or RETURN  button to return to 
the previous menu. Press repeatedly to escape 
from the menu mode and return to the 
projection.
J Operating procedure
1. Press  F G to...

ENGLISH - 33
Settings
PICTURE menu
Depending on the projection environment, you can use 
these preset parameter settings to optimise image 
projection. Press I H to cycle through the options.
You can adjust the contrast  of the projected image. 
Adjust the BRIGHTNESS in advance if necessary.
You can adjust the brightness of the projected image. You can adjust the color saturation of the projected 
image. (Available with 
VIDEO/S-VIDEO /YP
BPR/RGB  
movie/ DVI movie signals only)
You can adjust the skin...

Settings
PICTURE menu
ENGLISH - 34
You can adjust the white balance of the projected image.
 LOW More bluish
  DEFAULT Balanced white
  HIGH More reddish
You can keep the projected image bright and vivid even 
in well-lit rooms where the am bient light sources cannot 
be controlled, such as when a door opens or when 
window coverings fail to block out sunlight.
  AUTO : Automatic adjustment
  ON: Active
  OFF : Deactive
You can improve the vertical resolution of a 2-2 or 2-3 
pulldown movie. Press  I H...

ENGLISH - 35
Settings
POSITION menu
If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
you can correct keystone.
You can move the projected image for fine adjustment. 
Press I H  to move horizontally and  F G vertically. 
(Not available with  NETWORK signals) When 
H-FIT setting in ASPECT  menu is selected, you 
can move the projected image vertically for fine 
adjustment by pressing  I H. (Available with signals 
from  NETWORK  only)
If...

Settings
POSITION menu
ENGLISH - 36
You can switch the aspect ratio manually when needed. 
Press I H to cycle through the options.
J Aspect ratio options
Q AUTO
Signals which contains an identifying aspect signal 
will be detected and automatically project the 
image in proper ratio. (NTSC and 525i (480i) 
signals only)
Q4:3
When a 4:3 or 5:4 signal is detected, the image will 
be projected without any  change, and other signals 
will be adjusted to 4:3 with pr eserving original ratio.
Q16:9
When a...

POSITION menu
ENGLISH - 37
Settings
JMenu items displaying pattern depends on signals
If the projected image is  degraded, you can activate 
FRAME LOCK  for synchronisation. Press  I H to select 
the required option. (
Available with RGB/DVI signals only)
  OFF Deactive
  ON Active
SignalsSCREEN FORMAT  menu setting (See page 38)
16:1016:9
VIDEO/S-VIDEO/YP
BPR4:3  IH  16:9 IH  H-FIT  IH  HV-FIT 
IH  THROUGH 4:3
 IH  H-FIT  IH  HV-FIT  IH  
THROUGH
NTSC AUTO
 IH  4:3  IH  16:9  IH  H-FIT  
IH  HV-FIT  IH...

ENGLISH - 38
Settings
DISPLAY OPTION menu
JINPUT GUIDE
When you change the input method, the guidance 
appears in the upper right corner of the screen. 
The following display methods are available. Press 
I H  to cycle through the options.
J OSD DESIGN
You can change the background color of the menu. 
Press  I H to select the required option.
J WARNING MESSAGE
You can let display only the minimum warning 
messages and hide others.
 ON All of the warning messages will be 
displayed.
  OFF Only the minimum...

DISPLAY OPTION menu
ENGLISH - 39
Settings
JSCREEN POSITION
You can change the displaying position of the 
menu. When  SCREEN FORMAT  is set to 16:10, 
you can change the displaying position of the 
menu. Press  I H  to select the required option.
  LOW Displays the menu in the lower part 
of the screen.
  CENTER Displays the menu in the middle of 
the screen.
  HIGH Displays the menu in the upper part 
of the screen.
You can switch the logo on/off that is displayed when 
starting up the projector. Press...

Settings
DISPLAY OPTION menu
ENGLISH - 40
From menu operation, you can apply to the functions, 
which are only for the remote control.
OTHER FUNCTIONS
Menu itemsRefer
AUTO SETUP See page 25.
FREEZE See page 27.
AV MUTE See page 27.
SIDE BY SIDE See page 28.
INDEX-WINDOW See page 27.
DIGITAL ZOOM You can enlarge the projected 
image. Press 
I H  to adjust the 
size, and press the  ENTER 
button.
Press the  RETURN button to 
return to the normal projection.