Panasonic LCD Projector PT-FW100NTU Operating Instructions

PICTURE menu
ENGLISH - 31
Settings
You can perform more detailed image adjustment 
manually.
JFor S-VIDEO/VIDEO signals
Q TV-SYSTEM
When the video signal is changed, the setting 
switches automatically. You can switch the setting 
manually to match the video data. Press  I H  to 
cycle through the options.
Q STILL MODE
You can reduce the vertical flicker when projecting 
a still image.
 OFF : Deactive
  ON: Active
Q NOISE REDUCTION
You can switch the automatic noise reduction 
system on/off. Press  I H...

ENGLISH - 32
Settings
POSITION menu
If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
you can correct keystone.
You can move the projected image for fine adjustment. 
Press I H  to move horizontally and  F G  vertically. 
(Available with  VIDEO/S-VIDEO /COMPUTER /
COMPONENT  signals only)
If you have interference patterns of the projected image, 
which is sometimes referred to as moire or noise, you 
can minimize it by pressing  I H  to...

POSITION menu
ENGLISH - 33
Settings
QH-FIT
The 4:3/5:4 image will be stretched to the 
horizontal limit of the  SCREEN FORMAT setting 
size with preserving original ratio and the vertical 
edge will be cropped.
Q V-FIT
The 16:9 (16:10)/15 :9 image will be stretched to 
the vertical limit of the  SCREEN FORMAT setting 
size with preserving original ratio and the 
horizontal edge will be cropped.
Q HV-FIT
The image will be stretch ed to the vertical and 
horizontal limit of the  SCREEN FORMAT setting...

ENGLISH - 34
Settings
OPTION menu
When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H  to 
cycle through the options.
You can switch the logo on/off that is displayed when 
starting up the projector. Press  I H  to select the 
required option.  STARTUP LOGO  will be displayed for 
30 seconds.
  ON Active
  OFF Deactive
  USER Display the original text
QEditing the original text
If you select  USER, you...

OPTION menu
ENGLISH - 35
Settings
You can check how long the lamp has been used.
You can set the off timer to switch off the POWER of the 
projector after a certain period of time automatically 
when no signal is detected. Press  I H  to select the 
required period from 15 to 60 minutes at intervals of 
5 minutes.
You can switch the projector  start up status for when the 
Power cord  is connected while the  MAIN POWER is on, 
or for when the  MAIN POWER is switched on while the 
Power cord  is...

Settings
OPTION menu
ENGLISH - 36
If you use the projector at high elevation, the HIGHLAND 
setting need to be  ON to set the fan speed high. Press 
I  H  to select the required option.
  OFF The fan speed is low.
  ON The fan speed is high.
If the input signal contains  closed captions, you can turn 
on the feature and switch the channels. Press  I H  to 
select the required option.
You can use the 7 different test patterns to adjust the 
focus of the image. See “Lens shift and positioning” on 
page...

ENGLISH - 37
Settings
SECURITY menu
JEntering the SECURITY menu
Every time when you apply to the  SECURITY 
menu, you will be asked to perform the password 
operation.
When you apply to the  SECURITY menu before you 
change the password to your original, perform to input 
the following factory default password operation.
  Press  F H  G  I  F  H  G  I  and  ENTER .
QAfter you change the password
When you apply to the  SECURITY menu after you 
change the password to your original in the 
PASSWORD CHANGE...

ENGLISH - 38
Settings
NETWORK menu
In NETWORK  menu, the following items are available.
 WIRED LAN
  WIRELESS LAN
  NAME CHANGE
  INPUT PASSWORD
  PASSWORD CHANGE
  NETWORK STANDBY
  WEB CONTROL
  LIVE MODE CUT IN
  STATUS
  INITIALIZE
NOTE:
• See more detailed instructions in the contents of the 
CD-ROM  which is provided with the projector.
Remote control Control panel
 See “Navigating through the MENU” on page 27.
  See “Main menu and Sub-menu” on page 28.
Items in NETWORK menu 

ENGLISH - 39
Maintenance
TEMP, LAMP and FILTER Indicators
If a problem should occur with the projector, the TEMP, LAMP  and/or 
FILTER  indicators will inform you. Ma nage the indicated problems as 
follow. 1. Confirm the status of all indicators and projector, and switch off the  projector in proper way.
2. Find out the cause of the  problem by status of the TEMP, LAMP  
and/or  FILTER  indicators.
3. Follow the instructi on for each indication below and solve the 
problem.
4. Turn on the projector in...

ENGLISH - 40
Maintenance
Care and Replacement
JBefore cleaning the projector
 Switch off the  MAIN POWER  and disconnect the power plug from the wall outlet.
  Unplug all the cables from the projector.
J Cleaning the outer surf ace of the projector
Wipe off dirt and dust gently with a soft cloth.
 If it is difficult to remove the dir t, soak a cloth in a neutral detergent  diluted with water, wring the cloth well 
and then wipe the projector. Dry off the projector with dry cloth.
  If you use a chemical...