Panasonic LCD Projector PT-F300NTU PT-F300U Operating Instructions

Menu Navigation
ENGLISH - 31
Settings
 PROJECTOR SETUP SECURITY
 NETWORK
CLOSED CAPTION SETTING
page 38
CLOSED CAPTION
OFFON
MODE
CC1 CC2 CC3 CC4
STARTUP LOGO page 39
ONOFF
USER
AUTO SETUP page 39
AUTOBUTTON
SIGNAL SEARCHpage 39
ONOFF
BACK COLORpage 39
BLUEBLACK
WIDE MODEpage 39
AUTOOFF
ON
SXGA MODE page 39
SXGASXGA+
OTHER FUNCTIONSpage 40
AUTO SETUP FREEZE
AV MUTE INDEX-WINDOW
DIGITAL ZOOM
STATUSpage 41
SIGNAL
NAMEFREQUENCY
RUNTIME
PROJECTOR LAMP
REMAINING FILTER
QUANTITYAPPROX.TIME
COMPUTER2 SELECT...

Settings
Menu Navigation
ENGLISH - 32
JDisplaying the Main menu
Press the  MENU button to display the main menu 
and the operating guidance.
J Adjusting with the bar scale 
items
The triangle mark under the bar indicates factory 
default setting and the square indicates the current 
setting.
JReturning to the previous menu
Press the  MENU or RETURN  button to return to 
the previous menu. Press repeatedly to escape 
from the menu mode and return to the 
projection.
J Operating procedure
1. Press  F G to...

ENGLISH - 33
Settings
PICTURE menu
Depending on the projection environment, you can use 
these preset parameter settings to optimise image 
projection. Press I H to cycle through the options.
You can adjust the contrast  of the projected image. 
Adjust the BRIGHTNESS in advance if necessary.
You can adjust the brightness of the projected image. You can adjust the color saturation of the projected 
image. (Available with 
VIDEO/S-VIDEO /YP
BPR/RGB  
movie/ DVI movie signals only)
You can adjust the skin...

Settings
PICTURE menu
ENGLISH - 34
You can adjust the white balance of the projected image.
 LOW More bluish
  DEFAULT Balanced white
  HIGH More reddish
You can keep the projected image bright and vivid even 
in well-lit rooms where the am bient light sources cannot 
be controlled, such as when a door opens or when 
window coverings fail to block out sunlight.
  AUTO : Automatic adjustment
  ON: Active
  OFF : Deactive
You can improve the vertical resolution of a 2-2 or 2-3 
pulldown movie. Press  I H...

ENGLISH - 35
Settings
POSITION menu
If the projector is aligned non-perpendicularly to the 
screen, or if the projection screen has an angled surface, 
you can correct keystone.
You can move the projected image for fine adjustment. 
Press I H  to move horizontally and  F G vertically. 
(Not available with  NETWORK signals) If you have interference patterns of the projected image, 
which is sometimes referred 
to as moire or noise, you 
can minimize it by pressing  I H to adjust the clock 
frequency....

Settings
POSITION menu
ENGLISH - 36
You can switch the aspect ratio manually when needed. 
Press I H to cycle through the options.
J Aspect ratio options
Q AUTO
Signals which contains an identifying aspect signal 
will be detected and automatically project the 
image in proper ratio. (NTSC and 525i (480i) 
signals only)
Q4:3
When a 4:3 or 5:4 signal is detected, the image will 
be projected without any  change, and other signals 
will be adjusted to 4:3 with pr eserving original ratio.
Q16:9
When a16:9...

POSITION menu
ENGLISH - 37
Settings
If the projected image is degraded, you can activate 
FRAME LOCK  for synchronisation. Press  I H to select 
the required option. (
Available with RGB/DVI signals only)
  OFF Deactive
  ON Active
FRAME LOCK 

ENGLISH - 38
Settings
DISPLAY OPTION menu
JINPUT GUIDE
When you change the input method, the guidance 
appears in the upper right corner of the screen. 
The following display methods are available. Press 
I H  to cycle through the options.
J OSD DESIGN
You can change the background color of the menu. 
Press  I H to select the required option.
J WARNING MESSAGE
You can let display only the minimum warning 
messages and hide others.
 ON All of the warning messages will be 
displayed.
  OFF Only the minimum...

DISPLAY OPTION menu
ENGLISH - 39
Settings
You can switch the logo on/off that is displayed when 
starting up the projector. Press I H to select the 
required option.  STARTUP LOGO  will be displayed for 
30 seconds.
  ON Active
  OFF Deactive
  USER Display the original text
QEditing the original text
If you select USER , you can display the 2 lines of 
original text up to 40 characters in 1 line instead of 
the logo.
1. Select  USER and press  ENTER.
2. Select the required line to enter or edit the...

Settings
DISPLAY OPTION menu
ENGLISH - 40
From menu operation, you can apply to the functions, 
which are only for the remote control.
OTHER FUNCTIONS
Menu itemsRefer
AUTO SETUP See page 25.
FREEZE See page 27.
AV MUTE See page 27.
INDEX-WINDOW See page 27.
DIGITAL ZOOM You can enlarge the projected 
image. Press 
I H  to adjust the 
size, and press the  ENTER 
button.
Press the  RETURN button to 
return to the normal projection.