Panasonic LCD Projector PT-AH1000E Operating Instructions

[PICTURE] menu
ENGLISH - 41
Settings
Adjust [FULL SCAN(B)] / [SINGLE LINE 
4)  
SCAN(B)].
Set on [ADVANCED MENU] and use the 
 
z▲
▼ 
buttons to adjust [BRIGHTNESS B] and then 
[CONTRAST B].
[BRIGHTNESS B]
Adjust the bottom line of the 
waveform to 0 %  
(0 or 7.5 IRE)
Setting range:  
 
z
−16 to +16
[CONTRAST B]
Adjust the top line of the 
waveform to 100 %  
(100 IRE)
Setting range:  
 
z
−32 to +32
[SPLIT ADJUST]
You can perform image adjustment for some 
[PICTURE] menu items while displaying a...

[PICTURE] menu
42 - ENGLISH
Settings
Press the  button.
77  
SPLIT  ADJUST
SAVE CHANGES?
YES  : SAVE AND QUIT
NO  : QUIT WITHOUT  SAVING
CANCEL  : ADJUST AGAIN
CANCELYESNO
RETURNSELECT
ENTER
The confirmation message is displayed.
 
 
z
Select [YES] with the ◄► buttons and press the 
 button to apply the changes and return 
to the frozen screen. 
Select [NO] with the ◄► buttons and press the 
 button to return to the frozen screen 
without applying changes. 
Note
Select [CANCEL] on the confirmation...

[PICTURE] menu
ENGLISH - 43
Settings
Press the ▲▼ buttons to select [Y ADJUST] 
2 )  
and then press the  button.
The [Y ADJUST] menu is displayed and a 
 
z
maximum of 9 points are adjustable.
Y ADJUST
POINT5
0% 50%100%
INPUT
OUTPUT
INPUTOUTPUT50%0
(A)
Displays information about the current selected point 
(A). 
Default setting:
POINT [5]   INPUT [50 %]   OUTPUT [0]
[POINT]  
[1] to [9] Display the present selected point 
number. 
Numbers 1 to 9 are displayed from 
the left of the input signal level....

[PICTURE] menu
44 - ENGLISH
Settings
b. Adjusting the input level
To adjust the input level from the present setting, 
 
z
press 
▲
▼ continuously until it reaches your 
desired level. (It may be moved left and right.)
Setting range: from 1 to 99 % in increments of 
 
z
1 %.  (However, it cannot be set beyond the 
adjacent points.)
Only available to adjust the input level in the 
 
z
[Y ADJUST] screen and not other screens. 
(Input level cannot be adjusted on the [R/G/B 
ADJUST] screen.)
Ex.   Press ◄ in...

[PICTURE] menu
ENGLISH - 45
Settings
d. Changing the adjustment by different color 
types
The settings change as follows each time the 
 
z
 button is pressed.
Y ADJUSTR ADJUST
B ADJUSTG ADJUST
You can also switch each different color adjustment 
menu through the [GAMMA ADJUSTMENT] menu. 
Select your required color adjustment ([Y ADJUST], 
[R ADJUST], [G ADJUST], [B ADJUST]) with ▲ ▼ 
in the [GAMMA ADJUSTMENT] menu and press the 
 button.
GAMMA  ADJUSTMENT
ADJUSTMENT  MODE
GAMMA  HIGH
GAMMA  MID
GAMMA...

[PICTURE] menu
46 - ENGLISH
Settings
 
● Adjusting the gamma (when [SIMPLE] is 
selected for [ADJUSTMENT MODE])
Press the ◄► buttons to select [SIMPLE].
1)  
GAMMA  ADJUSTMENT
ADJUSTMENT  MODE
GAMMA  HIGH
GAMMA  MID
GAMMA  LOW
POINT
Y  ADJUST
R  ADJUST
GA DJUST SIMPLE
0
0
0
PICTURE
POSITION
LANGUAGE OPTIO N
Select item with the ▲▼ buttons, and 
2)  
adjust with the 
▲
▼ buttons.
You can adjust linear intensity at 3 levels (high, 
 
z
mid, low). Press ▲ ▼ to select your required 
gamma levels.
-1+1...

[PICTURE] menu
ENGLISH - 47
Settings
 
■ [MOTION EFFECT]
Videos with a lot of movement can also be viewed sharply.
Switch settingsSwitch settings
[OFF]MOTION EFFECT inactive
[ON]MOTION EFFECT active
Note
The effect on the video may be difficult to see in some 
 
z
cases.
 
■ [COLOUR MANAGEMENT]
For the selected [PICTURE MODE], you can adjust a 
selected color individually with [CURSOR] mode or adjust 
the six color components (Red, Green, Blue, Cyan, 
Magenta, Yellow) with [RGBCMY] mode.
 
Adjustment...

[PICTURE] menu
48 - ENGLISH
Settings
Press the ▲▼ buttons to select a menu 
5)  
item and the ◄► buttons to adjust each 
item level.
[COLOUR] Adjust the vividness of the 
color.Setting range:  
 
z
−30 to +30
[TINT] Adjust the color tone.Setting range:  
 
z
−30 to +30
[BRIGHTNESS]
Adjust the brightness of the 
color.
Setting range:  
 
z
−20 to +20
The default setting for each item is [0]. 
 
z
After adjusting, the post-adjustment color  (D) is 
displayed.
 
COLOUR
TINT
BRIGHTNESS
CURSOR
RETURN
DEFA...

[PICTURE] menu
ENGLISH - 49
Settings
Press the ▲▼ buttons to select a menu 
4)  
item and the ◄► buttons to adjust each 
item level.
[COLOUR] Adjust the vividness of the 
color.Setting range:  
 
z
−30 to +30
[TINT] Adjust the color tone.Setting range:  
 
z
−30 to +30
[BRIGHTNESS]
Adjust the brightness of the 
color.
Setting range:  
 
z
−20 to +20
The default setting for each item is [0]. 
 
z
 After adjusting, the post-adjustment color  (D) is 
displayed.
COLOUR
TINT
BRIGHTNESS
RED0
0
0
RETURN
DEFA...

[PICTURE] menu
50 - ENGLISH
Settings
Managing the stored logs created through the 
 
z
[RGBCMY] mode
 
 LOG
 ADJUSTMENT  MODE
 PICTURE MODE
 RED
 GREEN
 BLUE
 CY AN
 MAGENTA
  YELLOW
  ALL  DELETE  
: RGBCMY
: NORMAL
COLOUR     
TINT   BRIGHTNESS
+10+ 10+10
+10+ 10+10
+10+ 10+10
+10+ 10+10
+10+ 10+10
+10+ 10+10
Adjusted 
color
Selected 
color
[RED] 
[GREEN]  [BLUE] 
[CYAN] 
[MAGENTA]  [YELLOW]
Press ▲ ▼ to select the color you 
wish to edit, and press the  
button to display the screen to select...