Panasonic LCD Projector PT-AE700U Operating Instructions

ENGLISH
-41
Adjustments and settings
40-E
NGLISH
Adjusting the picturePress the For Gbutton to select an
item, and then press the Ior H
button to change the setting.
For items with bar scales, press the
ENTER button or the Ior Hbutton
to display the adjustment screen,
and then press the Ior Hbutton to
make the adjustment.
For items without any selective
arrow or bar scale, press the ENTER
button. The menu screen for the item
will then be displayed.
When an S-VIDEO/VIDEO signal is
being input...

ENGLISH
-43
Adjustments and settings
42-E
NGLISH
MEMORY SAVEPress the ENTER button to display
the “MEMORY SAVE” menu.
The settings adjusted in “PICTURE”
menu can be saved. Press the For
Gbutton to select the number
(“MEMORY 1/2/3”) in which you
want to save the setting, and then
press the ENTER button.
The confirmation screen will then be
displayed. Press the Ior Hbutton
to select “OK” and then press the
ENTER button.
The current picture setting will be
saved.
MEMORY LOADPress the ENTER button to...

ENGLISH
-45
Adjustments and settings
44-E
NGLISH
Adjusting the positionPress the For Gbutton to select
an item, and then press the Ior H
button to change the setting.
For items with bar scales, press the
ENTER button or the Ior Hbutton
to display the adjustment screen,
and then Press the Ior Hbutton
to make the adjustment.
When an S-VIDEO/VIDEO/HDMI
signal is being inputWhen a YP
BPRsignal is being input
When a PC signal is being input
Horizontal position
(H-POSITION)To move the picture to the...

ENGLISH
-47
Adjustments and settings
46-E
NGLISH
Option settingsPress the For Gbutton to select
an item, and then press the Ior H
button to change the setting.OSDON
The signal name is displayed in the
top-right corner of the screen when
the input signal is changed.
OFF
Use this setting when you do not
want the signal name to be
displayed.Noise Reduction (NR)If the signal is of such poor quality
that picture interference appears,
set “NR” to “ON”. To turn off the
“NR” feature, set to “OFF”.        OPTION...

Care and maintenance
48-E
NGLISH
ENGLISH
-49
RemedyProblem Indicator
display
Flashing (red)
It is nearly time to
replace the lamp
unit.Illuminated (red)
An abnormality has been detected in the lamp
circuit.
BDoes “REPLACE
LAMP” appear on
the screen after
the projector is
turned on?
BThis occurs when
the operation time
for the lamp unit is
nearing 2 700
hours (when
“LAMP POWER”
has been set to
“HIGH” and when
“DYNAMIC IRIS”
has been set to
“ON”). Ask your
dealer or an
Authorized
Service Center to
replace...

Care and maintenance
ENGLISH
-51 50-E
NGLISH
Cleaning and replacing the air filterIf the air filter becomes clogged with dust, the internal temperature of the
projector will rise, the TEMP indicator will illuminate and the projector’s
power will turn off (the TEMP indicator will flash after the power is turned off).
The air filter should be cleaned every 100 hours of use.NOTE:
BPlace the projector on top of a
soft cloth so that it will not
become scratched.
NOTE:
BBe sure to install the air filter
before...

Care and maintenance
ENGLISH
-53 52-E
NGLISH
,Press and hold the ENTER
button for approximately 3
seconds.
The “LAMP RUNTIME” will
change to “TIME RESET
[POWER OFF]”.
BIf the MENU button is pressed,
the lamp time resetting screen
will be cancelled.-
Turn off the power.
This will reset the cumulative
usage time for the lamp unit to
zero.
Refer to page 26 for details on
how to turn off the power. 'Install the lamp unit cover, and
then use a Phillips screwdriver
to securely tighten the lamp
unit cover...

ENGLISH
-55
Care and maintenance
54-E
NGLISH
Picture from
computer does
not appear.Problem Possible cause
BThe cable may be too long.
BThe external video output for the laptop computer
may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10]
keys simultaneously. The actual method varies
depending on the type of computer, so refer to the
documentation provided with your computer for
further details.)
Page–
–
Before carrying out cleaning and...

Others
ENGLISH
-57 56-E
NGLISH
SpecificationsPower supply: 100 V - 240 V ~, 50 Hz/60 Hz
Power consumption: 180 W [During standby (when fan is
stopped): Approx. 3.0 W]
Amps: 2.2 A - 1.1 ALCD panel:
Panel size (diagonal): 0.7 type (17.78 mm)
Aspect ratio: 16:9
Display method: 3 transparent LCD panels (RGB)
Drive method: Active matrix method
Pixels: 921 600 (1 280 x 720) x 3 panelsLens: Manual zoom (1 - 2.0) / Manual focus 
F 1.9 - 3.1, f 21.7 mm - 43.1 mmLamp: UHM lamp (130 W)Luminosity: 1 000 lmScanning...

ENGLISH
-59
Others
58-E
NGLISH
Appendix*1 The “i” appearing after the resolution indicates an interlaced signal.
*2 The following symbols are used to indicate picture quality.
AA Maximum picture quality can be obtained.
A Signals are converted by the image processing circuit before picture 
is projected.List of compatible signals
720 x 480i 15.7 59.9 A Video/S-Video720 x 576i 15.6 50.0 A Video/S-Video720 x 480i 15.7 59.9 13.5 A YP
BPR
720 x 576i 15.6 50.0 13.5 A YP
BPR
720 x 483 31.5 59.9 27.0 A YP...