Panasonic LCD Projector PT-AE500U Operating Instructions

ENGLISH
TQBJ 0133
LCD Projector 
Operating Instructions
Model No.
PT-AE500U
Before operating this product, please read the instructions carefully and save this
manual for future use.
PCPOWER
LIGHT
INPUTENTERMENUFREEZENORMALASPECTUSERMEMORYPICTUREMODELCD PROJECTORVIDEOCMPNTCOMPONENT
KEYSTONE
R
For assistance, please call : 1-888-View-PTV(843-9788)
or send e-mail to : [email protected]
or visit us at www.panasonic.com (U.S.A)
For assistance, please call : 787-750-4300
or visit us at...

2-E
NGLISH
ENGLISH
-3
Preparation
IMPORTANT SAFETY NOTICEWARNING: 
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Dear Panasonic Customer:This instruction booklet provides all the necessary operating information that
you might require. We hope it will help you to get the most out of your new
product, and that you will be pleased with your Panasonic LCD projector.
The serial number of your product may be found on its back. You should
note it in the space...

ENGLISH
-5
Preparation
Precautions with regard to safetyWARNINGIf a problem occurs (such as no image or no sound) or if you notice
smoke or a strange smell coming from the projector, turn off the power
and disconnect the power cord from the wall outlet.
BDo not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
BCheck that no more smoke is coming out, and then contact an Authorized
Service Center for repairs.
BDo not attempt to repair the projector yourself, as...

ENGLISH
-7
Preparation
6-E
NGLISH
Do not look into the lens while the projector is being used.
BStrong light is emitted from the projector’s lens. If you look directly into this
light, it can hurt and damage your eyes.
BBe especially careful not to let young children look into the lens. In
addition, turn off the power when you are away from the projector.
Do not place your hands or other objects close to the air outlet port.
BHeated air comes out of the air outlet port. Do not place your hands or
face,...

ENGLISH
-9
Preparation
8-E
NGLISH
When inserting the batteries, make sure the polarities (+ and -) are
correct.
BIf the batteries are inserted incorrectly, they may explode or leak, and fire,
injury or contamination of the battery compartment and surrounding area
may result.
Use only the specified batteries.
BIf incorrect batteries are used, they may explode or leak, and fire, injury or
contamination of the battery compartment and surrounding area may
result.
Do not mix old and new batteries.
BIf the...

ENGLISH
-11
Preparation
10-E
NGLISH
If using this projector at high elevations (above 1 400 m), 
set the “FAN CONTROL”  to “HIGH”. (Refer to page 43.)
Failure to observe this may result in malfunctions.Notes on useIn order to get the best picture quality
Draw curtains or blinds over any windows and turn off any fluorescent lights
near the screen to prevent outside light or light from indoor lamps from
shining onto the screen.
Do not touch the surfaces of the lens with your bare hands.
If the surface of...

12-E
NGLISH
ENGLISH
-13
Preparation
#Air outlet port
Do not cover this port.
$Connector panel (page 13)
%Power input socket (AC IN) (page 22)
The accessory power cord is connected here. Do not use any power cord
other than the accessory power cord.
&Lamp unit holder (page 47)
'Security lock
This can be used to connect a commercially-available theft-prevention
cable (manufactured by Kensington). This security lock is compatible with
the Microsaver Security System from Kensington.WARNINGDo not place...

ENGLISH
-15
Preparation
14-E
NGLISH
#
$
%
&'()
*
+
PC
POWER
LIGHT
INPUT
ENTER
MENU
FREEZE
NORMALASPECT
USERMEMORY
PICTUREMODE
LCD PROJECTORVIDEOCMPNT
COMPONENT
KEYSTONE
*
'
( &
0
1 )
/
,
-.+
Projector control panel
Remote control unit
#TEMP indicator (page 44)
This indicator illuminates if an abnormally high temperature is detected
inside the projector. If the temperature rises above a certain level, the
power supply will be turned off automatically and the indicator will flash.
$LAMP indicator...

ENGLISH
-17 16-E
NGLISH
Setting-upProjection methodsIn way of installing projector, any one of the following four projection methods
are used. Select whichever projection method matches the setting-up
method. (The projection method can be set from the “OPTION” menu. Refer
to page 43 for details.)
BFront-desk projectionBFront-ceiling projection
BRear-desk projection
(Using a translucent screen)BRear-ceiling projection
(Using a translucent screen)
Menu items Setting
FRONT
DESK FRONT/REAR
DESK/CEILING
Menu...

ENGLISH
-19
Getting started
18-E
NGLISH
ConnectionsNotes on connectionsBRead the instruction manual for each system component carefully before
connecting it.
BTurn off the power supply for all components before making any
connections.
BIf the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
BRefer to the list on page 54 for details on compatible signals which can be...