Panasonic LCD Projector PT-AE4000U Operating Instructions
Have a look at the manual Panasonic LCD Projector PT-AE4000U Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 27
Care and Replacement
ENGLISH - 27
Maintenance
Replacing the lamp unit
Before replacing the lamp unit
J
Switch off
MAIN POWER in proper way and disconnect the power plug from the wall outlet.
Wait for more than 1 hour and make sure the lamp unit and the surrounding\
s are cooled enough.
Unplug all the cables from the projector.
Prepare a Phillips-head screwdriver.
Contact an Authorized Service Center to purchase a replacement lamp unit (ET-LAE4000).
When the projector is mounted on...](http://img.usermanuals.tech/thumb/58/75939/w64_pt-ae4000u_en_om_d-26.png "Page 27
Care and Replacement
ENGLISH - 27
Maintenance
Replacing the lamp unit
Before replacing the lamp unit
J
Switch off
MAIN POWER in proper way and disconnect the power plug from the wall outlet.
Wait for more than 1 hour and make sure the lamp unit and the surrounding\
s are cooled enough.
Unplug all the cables from the projector.
Prepare a Phillips-head screwdriver.
Contact an Authorized Service Center to purchase a replacement lamp unit (ET-LAE4000).
When the projector is mounted on...")
![Page 30
30 - ENGLISH
Appendix
Technical Information
Appendix
Ceiling mount bracket safeguards
The projector and the ceiling mount bracket are designed for sufficient safety. However, make sure the safety cable
provided with the projector is installed and attached to the bottom of t\
he projector when mounting on the ceiling for
safety and security.Make sure to use a torque driver and do not use an electrical screwdrive\
r or an impact screwdriver.
Torque: 1.25 ± 0.2 N·m
9 mm
M4×0.7
NOTE:
Even if it...](http://img.usermanuals.tech/thumb/58/75939/w64_pt-ae4000u_en_om_d-29.png "Page 30
30 - ENGLISH
Appendix
Technical Information
Appendix
Ceiling mount bracket safeguards
The projector and the ceiling mount bracket are designed for sufficient safety. However, make sure the safety cable
provided with the projector is installed and attached to the bottom of t\
he projector when mounting on the ceiling for
safety and security.Make sure to use a torque driver and do not use an electrical screwdrive\
r or an impact screwdriver.
Torque: 1.25 ± 0.2 N·m
9 mm
M4×0.7
NOTE:
Even if it...")
![Page 33
Technical Information
ENGLISH - 33
Appendix
TerminalsS-VIDEO IN
Single-line, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω
VIDEO IN Single-line, RCA pin jack 1.0 V [p-p], 75 Ω
COMPUTER IN Single-line, D-sub HD 15-pin (female)
R.G.B.
0.7 V [p-p], 75 Ω
G.SYNC 1.0 V [p-p], 75 Ω
HD/SYNC TTL high impedance, automatic
positive/negative polarity
compatible
VD TTL high impedance, automatic
positive/negative polarity
compatible
COMPONENT IN Y, P
B/CB, PR/CRSingle-line, RCA pin jack × 3
Y: 1.0 V [p-p]...](http://img.usermanuals.tech/thumb/58/75939/w64_pt-ae4000u_en_om_d-32.png "Page 33
Technical Information
ENGLISH - 33
Appendix
TerminalsS-VIDEO IN
Single-line, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω
VIDEO IN Single-line, RCA pin jack 1.0 V [p-p], 75 Ω
COMPUTER IN Single-line, D-sub HD 15-pin (female)
R.G.B.
0.7 V [p-p], 75 Ω
G.SYNC 1.0 V [p-p], 75 Ω
HD/SYNC TTL high impedance, automatic
positive/negative polarity
compatible
VD TTL high impedance, automatic
positive/negative polarity
compatible
COMPONENT IN Y, P
B/CB, PR/CRSingle-line, RCA pin jack × 3
Y: 1.0 V [p-p]...")
![Page 34
Technical Information
34 - ENGLISH
Appendix
Trademark acknowledgements
HDAVI Control™ and VIERA Link™ are trademarks.
VGA and XGA are trademarks of International Business Machines Corporation.
S-VGA is a registered trademark of the Video Electronics Standards Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
The font used in the on-screen displays is a Ricoh bitmap font, which is\
manufactured and...](http://img.usermanuals.tech/thumb/58/75939/w64_pt-ae4000u_en_om_d-33.png "Page 34
Technical Information
34 - ENGLISH
Appendix
Trademark acknowledgements
HDAVI Control™ and VIERA Link™ are trademarks.
VGA and XGA are trademarks of International Business Machines Corporation.
S-VGA is a registered trademark of the Video Electronics Standards Association.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
The font used in the on-screen displays is a Ricoh bitmap font, which is\
manufactured and...")
Technical Information ENGLISH - 31 Appendix List of compatible signals ModeDisplayDisplay resolution (dots)*1 Scanning frequency Dot clock frequency (MHz) Picture quality *2Format H (kHz) V (Hz) NTSC/NTSC 4.43/ PAL-M/PAL60 - 720 × 480i 15.7 59.9 - A VIDEO/S-VIDEO PAL/PAL-N/SECAM -720 × 576i 15.6 50.0 - A 525i (480i) 480i720 × 480i 15.7 59.9 13.5 A RGB/YP BPR625i (576i) 576i720 × 576i 15.6 50.0 13.5 A 525p (480p) 480p 720 × 483 31.5 59.9 27.0 A RGB/YP BPR/HDMI 625p (576p) 576p 720 × 576 31.3 50.0 27.0 A 1 125 (1 080)/60i 1 080/60i 1 920 × 1 080i 33.8 60.0 74.3 AA 1 125 (1 080)/50i 1 080/50i 1 920 × 1 080i 28.1 50.0 74.3 AA 1 125 (1 080)/24p 1 080/24p 1 920 × 1 080 27.0 24.0 74.3 AA 1 125 (1 080)/60p 1 080/60p 1 920 × 1 080 67.5 60.0 148.5 AA 1 125 (1 080)/50p 1 080/50p 1 920 × 1 080 56.3 50.0 148.5 AA 750 (720)/60p 720/60p 1 280 × 720 45.0 60.0 74.3 AA 750 (720)/50p 720/50p 1 280 × 720 37.5 50.0 74.3 AA VGA480 VGA60 640 × 480 31.5 59.9 25.2 A RGB VGA75 640 × 480 37.5 75.0 31.5 A VGA85 640 × 480 43.3 85.0 36.0 A VGA138 640 × 480 72.1 138.0 62.3 A SVGA SVGA55 800 × 600 35.2 56.3 36.0 A SVGA60 800 × 600 37.9 60.3 40.0 A SVGA70 800 × 600 48.1 72.2 50.0 A SVGA75 800 × 600 46.9 75.0 49.5 A SVGA85 800 × 600 53.7 85.1 56.3 A WIDE720 WIDE720 1 280 × 720 45.1 60.1 76.5 AA XGA XGA60 1 024 × 768 48.4 60.0 65.0 A XGA70 1 024 × 768 56.5 70.1 75.0 A XGA75 1 024 × 768 60.0 75.0 78.8 A XGA85 1 024 × 768 68.7 85.0 94.5 A XGA89 1 024 × 768 72.1 89.0 99.2 A WIDE768 WIDE768 1 280 × 768 45.3 56.5 76.2 A MXGA MXGA70 1 152 × 864 64.0 71.2 94.2 A MXGA75 1 152 × 864 67.5 74.9 108.0 A SXGA SXGA60 1 280 × 1 024 64.0 60.0 108.0 A SXGA60+ SXGA60+ 1 400 × 1 050 65.1 59.9 122.4 A WIDE768-2 WIDE768-2 1 360 × 768 48.8 59.8 74.3 A WIDE800 WIDE800 1 280 × 800 49.7 59.8 83.5 A WIDE900 WIDE900 1 440 × 900 55.9 59.8 106.5 A WIDE1080/60 WIDE1080/60 1 920 × 1 080 66.5 59.9 138.5 AA WIDE1080/50 WIDE1080/50 1 920 × 1 080 55.6 49.9 141.5 AA The “i” appearing after the resolution indicates an interlaced sig\ nal. *1. The following symbols are used to indicate picture quality. *2. AA Maximum picture quality can be obtained. A Signals are converted by the image processing circuit before picture is \ projected.
Technical Information 32 - ENGLISH Appendix Specifications Power supplyAC 100 - 240 V 50 Hz/60 Hz Power consumption Less than 240 W During standby (when fan is stopped): 0.08 W (at 220 V) Amps 3.0 A - 1.5 A LCD panel Panel size (diagonal) 0.74 type (17.78 mm) Aspect ratio 16:9 Display method 3 transparent LCD panels (RGB) Drive method Active matrix method Pixels 2 073 600 (1 920 × 1 080) × 3 panels Lens Motorized zoom (2 ×)/Motorized focus F 1.9 - 3.2, f 22.4 mm - 44.8 mm Lamp UHM lamp (170 W) Luminosity *11 600 lm Operating environment Temperature0 °C - 40 °C (32 °F - 104 °F) When the HIGH ALTITUDE MODE (See the functional instructions that is in the provided CD-ROM.) is set to ON: 0 °C - 35 °C (32 °F - 95 °F) Humidity 20 % - 80 % (no condensation) Scanning frequency *2 (for RGB signal) Horizontal scanning frequency 30 kHz - 70 kHz Vertical scanning frequency 50 Hz - 87 Hz Dot clock frequency Less than 150 MHz COMPONENT (YP BPR) signals 525i (480i), 525p (480p), 625i (576i), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1 125 (1 080)/60i, 1 125 (1 080)/50i, 1 125 (1 080)/60p, 1 125 (1 080)/50p, 1 125 (1 080)/24p Color system 7 (NTSC/NTSC 4.43/PAL/PAL-M/P AL-N/PAL60/SECAM) Projection size 40" - 300" (1 016 mm - 7 620 mm) Throw distance 1.2 m - 18 m (3'11" - 59') Installation FRONT/DESK, FRONT/CEILING, REAR/DESK, REAR/CEILING (Menu selection method) Measurement, measuring conditions and method of notation all comply with\ ISO 21118 international * 1. standards. See “List of compatible signals” on page *2. 31 for available signals.
Technical Information ENGLISH - 33 Appendix TerminalsS-VIDEO IN Single-line, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω VIDEO IN Single-line, RCA pin jack 1.0 V [p-p], 75 Ω COMPUTER IN Single-line, D-sub HD 15-pin (female) R.G.B. 0.7 V [p-p], 75 Ω G.SYNC 1.0 V [p-p], 75 Ω HD/SYNC TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative polarity compatible COMPONENT IN Y, P B/CB, PR/CRSingle-line, RCA pin jack × 3 Y: 1.0 V [p-p] (including sync), 75 Ω P B/CB, PR/CR0.7 V [p-p], 75 Ω HDMI IN Triple-line, 19-pin HDMI connector HDMI™ (Deep Color, x.v.Color™), HDCP/HDAVI Control Ver. 4 compliant SERIAL D-sub 9-pin RS-232C compatible TRIGGER Dual-line monaural mini jack DC 12 V, max.100 mA (Selectable for input and output by menu operation.) Cabinet Moulded plastic (PC+ABS) Dimensions Width 460 mm (18 1/8") Height 130 mm (5 1/8") Length 300 mm (11 3/4") (excluding protruding parts) Weight Approx. 7.3 kg (16.09 lbs.) *1 CertificationsUL60950-1 C-UL FCC Class B ICES-003 Remote control Power supply 3 V DC (AA battery × 2) Operating range Approx. 7 m (22'11") (when operated directly in front of signal receptor) Weight125 g (4.4 ozs.) (including batteries) Dimensions Width 48 mm (1 7/8") Length 138 mm (5 3/8") Height 28.35 mm (1 1/8") (excluding protruding parts) Options Cable cover ET-PCE2000 Ceiling bracket ET-PKE2000/ET-PKE1000S Average value. Each product has an individual variability in weight. * 1.
Technical Information 34 - ENGLISH Appendix Trademark acknowledgements HDAVI Control™ and VIERA Link™ are trademarks. VGA and XGA are trademarks of International Business Machines Corporation. S-VGA is a registered trademark of the Video Electronics Standards Association. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. The font used in the on-screen displays is a Ricoh bitmap font, which is\ manufactured and sold by Ricoh Company, Ltd. All other trademarks are the property of the various trademark owners. Dimensions 300 (11 3/4") 460 (18 1/8")230 (9") 15 (5/8") 147 (5 3/4") 60 (2 3/8") 116 (4 5/8")130 (5 1/8") 17 (5/8") Unit: mm
ENGLISH - 35 Appendix Index A Accessories .................................. 10 AC IN ........................................... 13 Air exhaust port ............................ 12 Air filter ......................................... 12 Replacing .............................. 26 Air intake port ............................... 13 B Batteries Accessory .............................. 10 Compartment ........................ 1 1 C CD-ROM Accessories ........................... 10 Menu ..................................... 19 Ceiling mount bracket .................. 30 Cleaning ....................................... 26 COMPONENT IN Terminal ................................. 13 COMPUTER IN T erminal ................................. 13 Connections ................................. 15 CONTROL PANEL ....................... 12 D DEFAULTRemote control button ........... 11 Remote control function ........ 19 Dimensions .................................. 34 E ENTERControl panel button .............. 12 Remote control button ........... 11 F FOCUS Control panel button .............. 12 FREEZE Remote control button ........... 11 Front leg adjusters ....................... 13 FUNCTION Remote control button ........... 11 FUNCTION BUTT ON Remote control buttons ......... 11 H HDMI IN Terminal ................................. 13 HOME THEATER MUTE .............. 24 HOME THEATER VOLUME ......... 24 I INPUT SELECTControl panel button .............. 12 Remote control button ........... 11 INST ALLATION Projection method ................. 14 L LAMP Indicator status ...................... 25 LAMP Indicator ...................... 12 LAMP RUNTIME .......................... 28 Lamp unit Replacing .............................. 27 LENS Remote control button ........... 11 LENS CONTROL Remote control button ........... 11 Lens cover ................................... 12 Accessory .............................. 10 Attachment hole .................... 13 Lens shift Lens shift dial • Horizontal ..... 12 Lens shift dial • Vertical ......... 12 M MAIN POWER ............................. 12 MEMOR Y LOAD Remote control button ........... 11 Menu Menu list ................................ 20 Navigation ............................. 19 MENU Control panel button .............. 12 Remote control button ........... 11 Remote control function ........ 19 N Navigation buttons Control panel button .............. 12 Remote control button ........... 11 O OPERATE OTHER DEVICE ........ 24 P PICTURE ADJUSTMENT Remote control button ........... 11 PICTURE MODE Remote control button ........... 11 Power Control panel button .............. 12 Indicator ................................ 12 Indicator status ...................... 16 Remote control button ........... 11 Power cord ................................... 12 Accessory .............................. 10 Connecting ............................ 16 Power cord secure lock .......... 10, 16 Projection lens ............................. 12 R Remote control ............................. 1 1 Accessory .............................. 10 Signal emitter ........................ 1 1 Signal receptor ...................... 12 RETURN Control panel button .............. 12 Remote control button ........... 11 Remote control function ........ 19 S Safety cable ................................. 30 Accessory .............................. 10 Attachment point ................... 13 Screen size .................................. 14 Calculation methods .............. 14 Security lock ................................. 13 SERIAL T erminal ................................. 13 Specifications ............................... 32 S-VIDEO IN T erminal ................................. 13 T Technical Information ................... 30 TEMP Indicator ................................ 12 Indicator status ...................... 25 Throw distance ............................. 14 T op cover ............................... 13, 27 TRIGGER T erminal ................................. 13 T roubleshooting ........................... 29 V VIDEO INTerminal ................................. 13 VIERA Link ................................... 23 Remote control button ........... 11 VIERA LINK CONTROL ............... 23 W WAVEFORM MONITORRemote control button ........... 11 Z ZOOMControl panel button .............. 12