Home
>
Panasonic
>
Car Audio & Video
>
Panasonic Lcd Monitor Dvd Receiver Cq Vd7005u Operating Instructions
Panasonic Lcd Monitor Dvd Receiver Cq Vd7005u Operating Instructions
Here you can view all the pages of manual Panasonic Lcd Monitor Dvd Receiver Cq Vd7005u Operating Instructions . The Panasonic manuals for Car Audio & Video are available online for free. You can easily download all the documents as PDF.
Page 31
30 31CQ-VD7005U English ❏MENU Operation Note: ¡ The display returns to the previous status if there is no operation for more than 60 seconds after changing to the setting menu.(Example: DVD mode) Touch in Operation Screen. Touch desired setting. qw (Example: setting screen of “DISPLAY UNIT” apage 32) Determines the setting and goes back to the pre- vious menu out of the menu.e Determines the setting and gets out of the menu. [SRC] (Exit from the menu) [MENU] (Shows the menu display/ Goes back to the...
Page 32
31 32CQ-VD7005U English ID-CODE ID Code Setting Prior to operating this unit, it is advisable to assign a 4- digit ID code for security. Once the ID code has been set, the unit cannot be operated if the main power supply is disconnected then re-connected. It is electronically locked so that a thief cannot use the stolen unit unless that per- son knows the code you have set. The ID code operation must be performed only by the person to whom the unit belongs. Generally, it is not necessary to enter the ID...
Page 33
32 33CQ-VD7005U English MEMORY CLEAR Memory clearance The state of all of the current memories are returned to default settings. Note: ¡The ID code is not deleted by executing memory clear. : clears the memory to default settings : no memory clear. The display returns to the previous one. appears when is selected. : proceed. : no memory clear. CANCEL OK YES REALLY? NO YES OTHER Other settings : operation sound (beep) ON : operation sound (beep) OFF default: ON OFF ON (Beep setting)BEEP : sets to ON if...
Page 34
33 34CQ-VD7005U English Settings (continued) RADIOINPUT/OUTPUTDVDAUDIOSCREENUSER DIMMER Adjusting the brightness : automatically adjusted according to ambient light intensity. default: AUTO 4321 AUTO PICTURE Display appearance : decreases the contrast between black and white. : increases the contrast between black and white. [ ] (Adjust the image contrast)CONTRAST : darkens. : lightens. [ ] (Adjust the image brightness)BRIGHT : lightens the depth of color on the display. : deepens the depth of color on...
Page 35
¡To set the level to flat, touch and hold (flat) for more than 2 seconds. ¡Expectable effects vary with the audio format to be used, settings in the menu, and other factors. 34 35CQ-VD7005U English : more : less : more : less : more : less Setting range: off, +1 to +10 default: off ] [ (Applies to the Sub-woofer)SUB-W TruBass ] [ (Applies to the rear speakers)REAR TruBass ] [ (Applies to the front speakers)FRONT TruBass (TruBass Setting)TruBass : more : less : more : less Setting range: off, +1 to +10...
Page 36
35 36CQ-VD7005U English Settings (continued) SP LEVEL (Speaker level) Adjusting the output balance of each speaker : down, : up : down, : up : down, : up : down, : up : down, : up : down, : up Setting range: –10 dB to +10 dB (1 dB steps) default: ±0 dB for all speakers ¡If the speaker setting is or for a speaker, the test signal is not output and that speaker cannot be selected. ¡ Turn rotary volume controller or press [+] or [–] (VOL) to adjust the volume of the test signal. NONONE...
Page 37
36 37CQ-VD7005U English : enables the test tone. : disables the test tone. default: ¡When the test tone is set to on, test signal (a continu- ous tone) is output from each speaker for approximately 2 seconds. Adjust the output balance so that the tone appears to have the same volume from each speaker. Adjusting the output balance: Adjust the volume of all of the other speakers to the vol- ume level of the speaker from which the test signal appears to be the quietest. OFF OFF ON (Test tone output)TEST...
Page 38
37 38CQ-VD7005U English Settings (continued) DISPLAY Display aspect and DVD software mode : plays a video in 4:3 screen. : plays a video in wide screen (16:9). default: WIDE WIDE NARROW (Display aspect setting)DVD ASPECT : plays wide-screen video in Pan & Scan mode (in which the left and right edges of the screen are cut off). : plays wide-screen video in letterbox mode (in which black bands appear at the top and bottom of the screen). default: Note: ¡ Set the software setting according to the symbol...
Page 39
38 39CQ-VD7005U English DVD SOUND DVD sound setting : activates Pro Logic. : inactivates Pro Logic. default: Note : ¡This setting is enabled only in the DVD/VCD/CD player mode. ¡selection in some audio settings may disable audio output from the subwoofer. : simple stereo down mix (Lo = Left only, Ro = Right only) : surround element decodable down mix (Lt = Left total, Rt = Right total) Note : ¡This function is available only when “Dolby Digital” or “dts” source is playing and when sound comes out...
Page 40
39 40CQ-VD7005U English Settings (continued) FM SETUP Setting for FM stations : adjusted automatically : narrows the frequency bandwidth to be received to prioritize noise reduction. : widens the frequency bandwidth to be received to prioritize sound quality. default: : saves the preset stations in each band. : saves the preset stations in all FM lists regardless of band. default: EACH ALL EACH (Auto preset setting)AUTO PRESET AUTO WIDE NARROW AUTO (FM IF filter switching) NOISE SUPPRESSION AM SETUP...