Panasonic Lcd Monitor Cy Vhd9500u Operating Instructions

							68
CY-VHD9500U
CY-VHD9500U
69
[TOP MENU] [ENTER] ["] [#]
 [%] [$]
[:] 
[9][π] (STOP)
[;] (PAUSE)
[1] (PLAY)
 [DVD/SD MENU]
[SRC] (Source)
Playing SD Cards
 (continued)
E
N
G
L
I
S
H
25
SD Card InsertInsert and slide the SD card until it clicks into the 
SD card slot.
Note:
Bear in mind the following points when inserting or 
ejecting an SD card.
≥ The mode will not be switched automatically 
to SD by inserting an SD card into the unit. 
Therefore, to play SD cards, press [SRC] (Source) 
to switch to the SD mode regardless of whether 
the SD card is already inside the unit or not.
≥ Insert the SD cards properly so that they will not 
be inserted back to front or the wrong way around 
by mistake. (See fi gure at left.)
Mode Selection
1 Press ["] or [#] to select the mode.
2 Press [ENTER] or [1] (PLAY).
PICTURE:   The still pictures recorded on SD cards 
are played back in this mode (page 74).
MPEG4:   Moving pictures recorded on SD cards 
are played back in this mode (page 70).
MUSIC:   Music recorded on SD cards is played 
back in this mode (page 72).  
VOICE:   Voice recordings made on SD cards are 
played back in this mode (page 75).
E
N
G
L
I
S
H
26
Note:
In the SD mode, when the following operations are 
performed and then the SD mode is restored, the 
“MODE SELECT” screen will appear without fail.
≥ Power  off   ≥ MAIN POWER off
≥ ACC  off   ≥ Mode change   
Label side Beveled edge 
Concerning the Data on the Cards≥ When formatting the cards, use SD-Jukebox as 
the format.
≥ When data which is not supported by this unit has 
been recorded on a PC, it will not be recognized 
by the unit.
≥ Do not delete [DCIM], [SD_VIDEO], etc. since 
they are required in connection with the folder 
confi guration.Some fi les are not compatible with this unit and 
cannot be played back. For example: 
·  Moving picture fi les recorded using a digital still 
camera with moving picture function 
·  IC recorder voice fi les etc.
Note:
≥ Do not insert any objects other than 
the SD cards into the SD card slot.
≥ Do not leave an SD card inserted 
inside the unit when it is not used.
≥ Do not insert the SD cards into the 
disc slot by mistake.Notes on SD Cards
 (continued)
SD ModePress [SRC] (Source) to select SD mode.
≥ “MODE SELECT” screen is displayed.
MODE 
SELECT screen
SD Card EjectPress the SD card to eject it.WARNING:
≥  Do not place SD memory cards within the reach of children. There is a risk that children could 
swallow the SD memory card. If a child does swallow the SD memory card, contact your doctor 
immediately.
MODE 
SELECT screen 
						

							70
CY-VHD9500U
CY-VHD9500U
71
E
N
G
L
I
S
H
28
Setting Repeat during 
Moving Picture 
Playback 
(SETUP MENU)
Setting DISPLAY 
during Moving Picture 
Playback 
(SETUP MENU)
(While the moving picture list screen is displayed)
1 Press [DVD/SD MENU].
2 Select “REPEAT” by pressing ["] or [#].
3  Select OFF, 1FILE or ALL by pressing [%] or [$].
  OFF:  Normal playback (no repeat playback) (default)
  1FILE:  Only one fi le is played back repeatedly.
  ALL:  All the fi les are played back repeatedly.
[DVD/SD MENU]*: Press this to return to the moving picture list 
screen.
(While the moving picture list screen is displayed)
1 Press [DVD/SD MENU].
2 Select “DISPLAY” by pressing ["] or [#].
3  Select ON or OFF by pressing [%] or [$].
  ON:  The SD information display is set to ON. (default)
  OFF:  The SD information display is set to OFF.
[DVD/SD MENU]*: Press this to return to the moving picture list 
screen.
 * When  “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.
 * When  “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.
Playing SD Cards
 (continued)
E
N
G
L
I
S
H
27
SD Mode Operation (MPEG4)1  Select the moving pictures 
to be viewed by pressing 
["], [#], [%] and [$]. 
2 Press [ENTER] or [1] 
(PLAY) to play back the 
selected moving pictures.[π] (STOP): 
Press this to return to the 
moving picture list screen.
[;] (PAUSE): 
Press this to stop the playback 
temporarily.
[$]/[9]:
 
Press this to cue to the start 
of the next moving picture (or 
hold it down to fast forward).
[%]/[:]:
 
Press this to cue to the start of 
the moving picture now playing 
back (or hold it down to fast 
reverse).
Note: 
≥ The display returns to the initial screen (SD operation display 
mode) when [TOP MENU] is pressed.
≥
  If the fi le list screen contains 7 or more fi les, press
 ["], [#], [%] 
or [$] to scroll to the next (or previous) page.
≥ When MPEG4 moving pictures are played back, mosaic-like 
patterns may occur or frames may be missed during scenes with 
fast-moving subjects: this is normal and not a sign of trouble.
Playing Back 
Moving Pictures 
[MPEG4]Setting the Screen 
Size for Moving Picture 
Playback (SETUP MENU)
(While the moving picture list screen is displayed)
1 Press [DVD/SD MENU].
2 Select “SCREEN” by pressing ["] or [#].
3  Select FULL or NORMAL by pressing [%] or [$].
 FULL
 :    
Enlarged screen (default)
 NORMAL:  Normal screen
[DVD/SD MENU]*: Press this to return to the moving picture list 
screen.
MOL002MOL002MOL002
 * When  “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.Moving picture list screen
(Example)
Elapsed playback time
File name Creation 
date/time 
						

							72
CY-VHD9500U
CY-VHD9500U
73
ABC/XYZ ABC/XYZ
Playing SD Cards
 (continued)
E
N
G
L
I
S
H
29
SD Mode Operation (MUSIC)1  Select the music fi le to be 
heard by pressing ["], 
[#], [%] and [$]. 
2 Press [ENTER] or [1] 
(PLAY) to play the selected 
music fi le.[π] (STOP): 
Press this to return to the music 
fi le  list  screen.
[;] (PAUSE): 
Press this to stop the playback 
temporarily.
[$]/[9]:
 
Press this to jump to the start of 
the next fi le (or hold it down to fast 
forward).
[%]/[:]:
 
Press this to return to the start of 
the fi le now playing back (or hold it 
down to fast reverse).
Note:
≥ If still pictures tied in with music as well are recorded, they will be 
played back at the same time as the music. Use the SD-Jukebox 
(option) to tie still pictures in with music.
≥ The display returns to the initial screen (SD operation display 
mode) when [TOP MENU] is pressed.
≥ MP3 audio fi les cannot be played. (However, this does not apply 
to MP3 fi les which were written using SD-Jukebox for use as SD 
audio fi les.)
Playing Back Music 
(Recorded on SD 
Cards) 
[MUSIC]Selecting the Playlist 
for Music Playback 
(SETUP MENU)
(While the music fi le list screen is displayed)
1 Press [DVD/SD MENU].
2 Select “SELECT PLAYLIST” by pressing ["] or [#], and then 
press [ENTER] or [1] (PLAY).
3  Select the playlist to be played back by pressing ["] or [#].
  Default Playlist  : All the music fi les recorded are played back.
  PLAYLIST**  : The selected playlist is played.
 
[DVD/SD MENU]* :  Press this to return to the music fi le list screen.
**  The titles that are displayed differ depending on the settings 
performed when the playlists were created.  For further details, 
refer to the operating instructions for the SD-Jukebox.
Setting Repeat during 
Music Playback 
(SETUP MENU)
Setting DISPLAY for 
Music Playback 
(SETUP MENU)
2 Select “REPEAT” by pressing ["] or [#], and then press 
[ENTER] or [1] (PLAY).
3  Select the setting by pressing [%] or [$].
  OFF:      No repeat playback (default)
 1
MUSIC
: Only one fi le is played back repeatedly. 
  ALL:      All the fi les are played back repeatedly.
[DVD/SD MENU]* :  Press this to return to the music fi le list screen.
2 Select “DISPLAY” by pressing ["] or [#].
3  Select ON or OFF by pressing [%] or [$].
  ON:  The SD information display is set to ON. (default)
  OFF:  The SD information display is set to OFF.
[DVD/SD MENU]* :  Press this to return to the music fi le list screen. (While the music fi le list screen is displayed)
1 Press [DVD/SD MENU].
(While the music fi le list screen is displayed)
1 Press [DVD/SD MENU].
 * When “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.
 * When “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.
 * When “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.
E
N
G
L
I
S
H
30
Music fi le list screen
(Example)
File nameElapsed playback time 
						

							74
CY-VHD9500U
CY-VHD9500U
75
Playing SD Cards
 (continued)
SD Mode Operation (VOICE)
[$]/[9] or [%]/[:]: 
Press these to switch between ON 
and OFF.
[DVD/SD MENU]* : 
 Press this to return to the voice fi le 
list screen.
ON:  The SD information display is set to ON. (default)
OFF:  The SD information display is set to OFF.
E
N
G
L
I
S
H
31
E
N
G
L
I
S
H
32
1  Select the voice fi le to be 
heard by pressing ["] and 
[#].
2 Press [ENTER] or [1] 
(PLAY) to play the selected 
voice fi le.[π] (STOP): 
Press this to return to the voice fi le 
list screen.
[;] (PAUSE): 
Press this to stop the playback 
temporarily.
[$]/[9]:
 
Press this to jump to the start of 
the next voice recording (or hold it 
down to fast forward).
[%]/[:]:
  
Press this to return to the start of 
the voice recording now playing 
back (or hold it down to fast 
reverse).
Note: 
≥ The display returns to the initial screen (SD operation display 
mode) when [TOP MENU] is pressed.
Playing Voice 
Recordings 
(Recorded on SD 
Cards) [VOICE]Setting DISPLAY for 
Voice Playback 
(SETUP MENU)
(While the voice fi le list screen is displayed)
Press [DVD/SD MENU].
 * When “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.
SD Mode Operation (PICTURE)1  Select the still pictures to 
be viewed by pressing ["], 
[#], [%] and [$]. 
2 Press [ENTER] or [1] 
(PLAY) to play back the 
selected still pictures.To play back a series of still pictures in succession (slide-show):
(While the still picture playback screen is displayed)
Press [1] (PLAY). The still pictures will be played back for 
5 seconds each.[$]/[9]:
 
Press this to display the next still 
picture.
[%]/[:]:
 
Press this to display the previous 
still picture.
Note: 
≥ The display returns to the initial screen (SD operation display 
mode) when [TOP MENU] is pressed.[π] (STOP): 
Press this to return to the still 
picture list screen.
[;] (PAUSE): 
Press this to stop the playback 
temporarily.
Playing Back Still 
Pictures [PICTURE]Setting DISPLAY for 
Still Picture Playback 
(SETUP MENU)
(While the still picture list screen is displayed)
Press [DVD/SD MENU].
[$]/[9] or [%]/[:]:
Press these to switch between 
ON and OFF.
[DVD/SD MENU
]*: 
Press this to return to the still 
picture list screen.
ON: The SD information display is set to ON. (default)
OFF: The SD information display is set to OFF.
 * When “MENU” appears on 
the screen, it always refers 
to the [DVD/SD MENU] 
button on the remote 
control unit which is to be 
pressed.Still picture list screen
(Example)Voice fi le list screen
(Example)
Note: 
≥ On some settings, the screen may turn black.
File name
Creation 
date/time
File name Creation 
date/time Elapsed playback time 
						

							76
CY-VHD9500U
CY-VHD9500U
77
Display (SCREEN) Settings
Note:
≥ If no operation takes place for more than 
10 seconds, the display exits the menu. 
1
  Menu
DimmerDefault: AUTO
Setting range:  AUTO, 1 to 4
3
 Setting
E
N
G
L
I
S
H
33
E
N
G
L
I
S
H
34
Adjust the Image 
Contrast
Default: d0 
Setting range:  j15 to i15Adjust the Image BrightnessDefault: d0 
Setting range:  j15 to i15Adjust the Image Color 
DepthDefault: d0 
Setting range:  j15 to i15Adjust the Image Tone or 
TintDefault: d0 
Setting range:  j15 to i151 Press [MENU] 
to display the menu.
2 Press [%] or [$] 
to select “SCREEN”.
SCREEN
DIMMERCONTRASTBRIGHTCOLORTINT
2
 SubmenuSelect
Select
Select
Select
Select Select1 Press [%] or [$] to adjust.
2 Press [ENTER] to set (Dimmer setting only).
3 Press [SRC] (Source) to exit the menu.
AUTO
1
2
3
4
:  automatically adjusted according to 
ambient light intensity.
Darker
Brighter
[$]:  Increase the contrast between 
black and white.
[%]:  Decrease the contrast between 
black and white.
[$]:  Lighten
[%]:  Darken
[$]:  Deepen the depth of color on the 
display
[%]:  Lighten the depth of color on the 
display
[$]: Emphasize green in the color image
[%]:    Emphasize red in the color image 1 Press ["] or [#] 
to select the item.
2 Press [ENTER].
SCRSCR
EEN  
N  
USERUSER
DIM
MERER
COCO
NTRAST
RAST
BRBR
IGHTGHT
COLOOLO
R
TINT : SELECT  ENTER : SEL
SOURCE : END
[MENU]
 [ENTER] ["] [#]
 [%] [$]  [SRC] (Source)
AUAU
TOTO
ENTER: SET  : SELECT
DIMMER
2
3
4
SCRSCR
EEN  
N  
USERUSER 
						

							78
CY-VHD9500U
CY-VHD9500U
79
Other (USER) Settings
Note:
≥ If no operation takes place for more than 
10 seconds, the display exits the menu. 
1
  Menu
Video Control SettingThis “Video Control Setting” is required 
when you connect a Panasonic car 
navigation system with a built-in DVD 
player (available in future).
Default: VTR1
Setting range: VTR1, VTR2
3
 Setting
E
N
G
L
I
S
H
35
E
N
G
L
I
S
H
36
Button Operation SoundDefault: ON 
Setting range:  ON/OFFBlue Ceiling Refl ected 
Illumination SettingDefault: ON 
Setting range:  ON/OFFAudio Output Level Default: 3 
Setting range: 1/2/31 Press [MENU] 
to display the menu.
2 Press [%] or [$] 
to select “USER”.
USER
VIDEO-CONT
BEEPLIGHT
OUTPUT LEVEL
2
 SubmenuSelect
Select
Select
Select Select1 Press [%] or [$] to adjust.
2 Press [ENTER] to set.
3 Press [SRC] (Source) to exit the menu.
ON:  Operation sound (Beep) ON
OFF: Operation sound (Beep) OFF
ON:  Blue ceiling re ected  illumination lights.
OFF: Blue ceiling re ected  illumination lights off.
1: Minimum level
2: Middle level
3: Maximum level 1 Press ["] or [#] 
to select the item.
2 Press [ENTER].
VTR1: Connected to the VTR1-IN
VTR2:  Connected to the VTR2-IN
Memory ClearDefault: NO 
Setting range:  YES/NO
MEMORY CLEAR?Select
YES: Default settings
NO:   No memory clear
The display returns to the previous one.
SCREESCREE
N   N   
USERUSERVIDEO-C
O-C
ONT
BEEPLIGHT
HT
OUTPUTP
UT T LEVEL
EL
MEMORY ORY 
CL
EAR?AR?
 : SELECT  ENTER : SEL
SOURCE : END
ENTER: SET SCREE
SCREE
N  N  
USERUSER
 : SELECTVTRTR
VTRVTR
2
[MENU]
 [ENTER] ["] [#]
 [%] [$]  [SRC] (Source)
Note:
≥ In the SD mode, SETUP MENU settings are not 
returned to the default settings even when YES 
is selected as this setting. Note:
≥ Select a terminal connected to the DVD output terminal of  a Panasonic car navigation system with a 
built-in DVD player (available in future) through an RCA cord.
≥ When you coonect a Panasonic car navigation system with a buit-in DVD player, connect a video 
control lead as well.
Note:
≥ The sound may be distorted depending on the 
input sensitivity of the external device connected. 
Proceed with an adjustment only if this is the 
case. Normally, keep at the default setting. 
						

							80
CY-VHD9500U
CY-VHD9500U
81
E
N
G
L
I
S
H
38
E
N
G
L
I
S
H
37
DVD video Settings
Note:
≥ After the DVD settings have been changed and  
entered, the player returns to the start of the 
disc and begins playback.
≥ When the disc has predetermined language 
or other settings, the user settings are not 
re ected.
1
  Display 
Main Menu.
DVD Menu Language 
settingDefault: English
3
 Select each item.
Subtitle Language 
SettingDefault: EnglishAudio Language 
Setting Default: EnglishDisplay Aspect 
SettingDefault: 16:9(While disc stopped)
Press [DVD/SD MENU].
1.Menu Language2.Subtitle Language3.Audio Language4.TV Aspect
2
  Select each 
setting menu.
Press [1].Press  one of the numeric buttons ([1]s[6]).Press  one of the numeric 
buttons ([1]s[7]).
1. English
2. French
3. Spanish
4. Other:  (page 96)
5. Return:  The display returns to “Main Menu”.
4
 Finish the setting.Press [0].
≥ The setting is completed.
(While disc stopped)
Press [DVD/SD MENU]. Press [2].
Press [3].
Press [4].1. English
2. French
3. Spanish
4. Other:  (page 96)
5. Dispoff:  Subtitle language is not displayed.
6. Return:  The display returns to “Main Menu”.
1. English
2. French
3. Spanish
4. Other:  (page 96)
5. Return:  The display returns to “Main Menu”.
1. 4:3: Plays a video in 4:3 screen.
2. 16:9: Plays a video in wide screen (16:9).
3. Return:  The display returns to “Main Menu”.Note:
≥ A disc supporting closed caption and 
subtitles may overlap each other on the 
screen. In this case, turn the subtitle off.

1. Menu  Language    :  English
2. Subtitle  Language  :  English
3. Audio  Language   :  English
4. TV Aspect    :  16:9
5. TV Mode (4:3)    :  Pan&Scan
6. On-Screen Messages  :  ON
7. D.Range Compression  :  OFF
0  :  Exit

Select
Language1. English
2. French
3. Spanish
4. Other
5. Return
[1]s[7]
 [0] (Finish the setting.)
 [DVD/SD MENU] 
						

							82
CY-VHD9500U
CY-VHD9500U
83
E
N
G
L
I
S
H
40
E
N
G
L
I
S
H
39
DVD video Settings 
(continued)
Note:
≥ After the DVD settings have been changed and  
entered, the player returns to the start of the 
disc and begins playback.
≥ When the disc has predetermined language 
or other settings, the user settings are not 
re ected.
1
  Display 
Main Menu.
On-Screen Messages 
SettingThis is to set On-Screen Display messages 
which will be displayed when OSD is 
turned off by pressing [OSD] (page 55).
Default: ON
3
 Select each item.
Dynamic Range 
Compression SettingBy the compressing the range of the 
playback level (the dynamic range), it is 
possible to maintain the impact of audio 
even at low volumes.
This function only works with Dolby 
Digital encoded material.
Default: OFF(While disc stopped)
Press [DVD/SD MENU]. 
6.On-Screen Messages7.D.Range Compression
2
  Select each 
setting menu.
Press [6].Press  one of the numeric buttons ([1]s[6]).Press  one of the numeric 
buttons ([1]s[7]).
1. ON:   When power is turned on, On-Screen Display 
messages such as “Play” and “Pause” 
will always be displayed on the screen for 
5 seconds.
2. OFF:   When power is turned on, On-Screen Display 
messages such as “Play” and “Pause” will not 
be displayed on the screen.
3. Return:  The display returns to “Main Menu”.
4
 Finish the setting.Press [0].
≥ The setting is completed.
Press [7].1. Minimum:   Mode with the greatest compression, 
roughly equivalent to a TV broadcast.
2. Standard:   Mode recommended by the software 
manufacturer for listening at low 
volume.
3. OFF:   Movie theater mode with no 
compression.
4. Return:  The display returns to “Main Menu”.
Note:
≥ When it is dif cult to hear comparatively quiet sounds 
(such as movie dialogue), setting “Minimum” will make 
those sounds easier to hear.
≥ The item can be switched also by holding down [0] for 
2 seconds at a time during playback.
DVD Software modeSet this when playing wide-screen video 
on a conventional-size (4:3) TV.
Default: Pan&Scan
5.TV Mode (4:3)Press [5].1. Pan&Scan: Plays in Pan&Scan mode.
2. Letterbox: Plays in Letterbox mode.
3. Return: The display returns to “Main Menu”.Note:
≥ If “Pan & Scan” or “Letterbox” is already 
set in the software, this setting is 
ignored.
(While disc stopped)
Press [DVD/SD MENU]. 

Select
TV Mode1. Pan&Scan
2. Letterbox
3. Return
[1]s[7]
 [0] (Finish the setting.)
 [DVD/SD MENU]

1. Menu  Language    :  English
2. Subtitle  Language  :  English
3. Audio  Language   :  English
4. TV Aspect    :  16:9
5. TV Mode (4:3)    :  Pan&Scan
6. On-Screen Messages  :  ON
7. D.Range Compression  :  OFF
0  :  Exit 
						

							84
CY-VHD9500U
CY-VHD9500U
85
E
N
G
L
I
S
H
41
Aspect Ratio
Note:
≥ In some cases, the picture looks different from 
the original one due to your selection of aspect.
≥ This is to remind you that compression or 
extension of the screen using the aspect ratio 
changing function of this product for commercial 
purpose of pro t making or viewing/listening 
by the public could infringe on the rights of the 
author protected by the copyright law.
≥ If you expand normal picture (4 to 3) by using 
“JUST”, “ZOOM” or “FULL” aspect to the full of 
the screen, you might not see the periphery of 
the picture, or you might see a distorted picture. 
Therefore, use the “NORMAL” mode to see the 
original pictures as the author intended it.Press [A] (ASPECT) to change the aspect ratio as 
follows.
Default: NORMAL
Mode: 4 types
NORMAL
≥ The conventional display 
image has a 4 to 3 ratio 
of horizontal to vertical.
≥ In this case, a blank area 
remains on the right and 
left sides of the display.
FULL
≥ The screen is extended 
horizontally as a whole 
to the aspect of 16 to 9.
≥ The extension ratio is 
the same at any point of 
the screen.
ZOOM
≥ The screen is fully 
extended at the normal 
aspect ratio of 4 to 3.
≥ The top and bottom of 
the screen are slightly 
cut.
JUST
≥ The screen is extended 
horizontally to the aspect 
ratio of 16 to 9.
≥ The extension ratio 
increases toward the 
right and left ends of the 
screen.
Replacing the Bulb of the Dome Light
E
N
G
L
I
S
H
42
Note:
≥ Be careful not to scratch the surface of the front 
cover when attaching it.
A
A
A
1 
2
3
5
[A] (ASPECT)
6
Preparation:
≥ Turn the dome light switch off (page 46).
≥ Open the display unit (page 50).
1 Remove the 2 screws.
2   Place your  ngers at A (in 2 places) on the 
panel, and slowly pull down the panel.
3 Pull out the bulb to be replaced.
 ≥  Do not turn the bulb but pull it straight out.
4 Push the new bulb into place.
5  Insert the end of the panel, and push it back into 
place as shown in the  gure.
6 Secure the screws.Caution:
≥ Ask a qualifi ed specialist to do this job.
≥ While you are replacing a bulb, be absolutely 
sure to keep the dome light switch at OFF. 
Otherwise, you may burn yourself.
≥ The bulb is very hot to the touch while it is 
lighted and immediately after it has gone 
off. Before attempting to replace it, turn the 
domelight switch off, wait several minutes 
and then check that it cooled off.
≥ Use a bulb with the specifi ed ratings 
(12 V/5 W). Do not use any other bulb.
≥ Gripping the bulb with too much force may 
break it. Wear fi ngerstalls or use some other 
anti-slip method when replacing it. 
						

							86
CY-VHD9500U
CY-VHD9500U
87
Troubleshooting
E
N
G
L
I
S
H
43
Preliminary StepsCheck and take steps as described in the tables below.If You Suspect Something WrongImmediately switch the power off.
Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for 
repairs. Never try to repair the unit by yourself because it is dangerous to do so.WARNING:
≥ Do not use the product when it is broken or there is some abnormality.
In the unlikely event that the product breaks (such as when no image is displayed or there is no sound) 
or there is some abnormality (such as when a foreign object is inside the product, water was spilled 
on it, smoke comes out or the product makes a strange smell), immediately stop using the product and 
be sure to contact the store from which you purchased your product or a nearby Panasonic Servicenter.
Continuing to use the product in that condition could cause accidents, fi re or electrical shock.Troubleshooting TipsCommonNo power to the unit. 
The power cord (battery, ACC and 
ground) is connected in the wrong 
way.Check the wiring.
Fuse blow out.Eliminate the cause of fuse blow out 
and replace the fuse with new one. 
Consult your dealer.
Problem
Possible cause Possible solution
Sound is not 
generated.
The volume on the headphones is 
adjusted to zero.Raise the volume on the headphones.Cables are not correctly connected.Connect cables correctly.MAIN POWER switch is set to OFF.Switch MAIN POWER to ON.
The power of headphones is set to 
OFF.Switch the power of headphones to 
ON.
E
N
G
L
I
S
H
44
Problem
Possible cause Possible solution
Noise
There is an electromagnetic-wave 
generator such as a cellular phone 
near the unit or its electrical lines.Keep an electromagnetic-wave 
generator such as a cellular phone 
away from the unit and the wiring of 
the unit. In case the noise cannot be 
eliminated due to the wiring harness 
of the car, consult your dealer.
The contact of the ground lead is 
poor.Make sure that the ground lead is 
securely connected to an unpainted 
part of the chassis.The headphones are too far from 
this unit.Use the headphones within a distance 
of 2.5 m from the unit.The path between the unit and 
headphones is obstructed by 
something.The batteries of the IR wireless 
headphones have run down.When using the headphones, remove 
any obstacles that obstruct the path 
between the headphones and unit.
Replace the batteries.
Common (continued)
MonitorThe tilt angle or 
the lateral angle of 
the display is not 
adjustable.
There is an obstacle.Install the unit where the unit moves 
freely.
Problem
Possible cause Possible solution
Noise is made in 
step with engine 
revolutions.
Alternator noise comes from the 
car.Change the wiring position of the 
ground lead.
Mount a noise fi lter on the power supply.
Dome lightDome lights do not 
come on.
The wires are not connected 
properly.For the wiring connections of the dome 
lights, consult a specialized contractor 
or your dealer where you purchased 
the unit.
Problem
Possible cause Possible solution
The dome light switch is at the OFF 
position.Set it to the ON position. The batteries of the IR wireless 
headphones have run down.Replace the batteries.