Panasonic Kxt7667 User Manual

							User Guide
Model No. KX-T7667
Digital Proprietary Telephone 
Please read this guide before using and save for future reference. 
Document Version: 2006-02 
						

							Off-hook Outside (CO) Line button
Incoming Call Distribution Group buttonOn-hook Feature number Talk
Direct Station Selection button
Features List
Confirmation ToneC. ToneRingback ToneR.B. Tone
Call Hold
To hold To retrieve a call at the holding extension
To retrieve an outside call from another extension
//C. Tone
(ICD Group)(DSS)
(CO)
(CO)
(CO)
(ICD Group)
Operation
To dial To an extension assigned as a One-touch 
Dialing button
To dial To store To store
personal speed 
dial no. (2 digits)
desired no. 
(max. 32 digits)
#3
2
0
Redial
Quick Dialing
One-touch 
Dialing
Operator Call
Personal 
Speed Dialing 
System 
Speed Dialing 
Doorphone Call
Automatic 
Callback BusyMaking Calls
quick dial no.
Callingextension no.
To an outside party
doorphone no. (2 digits)
To set
To cancel
466
While hearing a busy tone
To answer from an idle extensionWhile hearing a callback ringTo answer from an idle outside lineWhile hearing a callback ring
outside phone no.
system speed dial no. (3 digits)
To dial
personal speed dial no. (2 digits)
31
outside
phone no.
desired no. 
(max. 32 digits)
Feature
C. Tone
C. Tone
C. ToneC. Tone
R.B. Tone
Making Calls
During a Conversation
(CO)
(CO)
0
— 2 — 
						

							Feature Operation
Multiple Party 
Conversation
To leave a conference To add other parties during a conversation
desired 
phone no.
Call Park
To set
52Specified
Autoparking zone no.
Talk to the 
new party.Talk with 
multiple parties.
(2 digits)
Call Transfer
During a Conversation
outside
phone no.
To an extension
To an outside partyextension no.
Answering a 
Call Waiting
Features List
C. Tone
C. Tone
C. Tone
C. Tone
C. Tone
Useful Features
Off-hook Monitor
During a conversation using the handsetTo set /cancel
Call Pickup
Sending a Call 
Waiting Tone1
While hearing a busy tone
Wait for an answer.
To retrieve
52stored parking
zone no.(2 digits)
C. Tone
C. Tone
To hold the current call then talk to the new party
/
Group40
Directedextension no.41
group no. (2 digits)C. Tone
*
*
 Disregard this step if both parties are extensions.
SPSP-
PHONE
(CO)
(DSS)
(CO)
— 3 — 
						

							Features List
Feature Operation
Useful Features
33
To page
To answer
To allow/deny a paged announcement
721
721
Deny
Allow1
0
Announce.
Wait for 
an answer.
43
paging group 
no. (2 digits)
Paging
Message 
WaitingCaller
Called
extension
To leave a message waiting indicationWhen the called extension is busy or does not answer
To call back
C. Tone
C. ToneC. Tone
C. Tone
C. Tone
For Log-in 
For Log-out1736
0736
extension no.ICD GroupSpecified
AllLog-in/Log-outC. Tone
Before Leaving Your Desk
Setting Absent 
Message
message no.
(1-9)To set
To cancel
0
parameter 
(if required)
750
750#
Call
Forwarding
0
Busy
Cancel
No answer
Busy/ 
No answerCO line 
access no.
All callsextension no.
outside 
phone no.
Both Calls
Outside Calls
Intercom Calls
OR
C. Tone
1
2
2
3
4
5
0
#
71
— 4 — 
						

							FeatureOperation
Features List
Before Leaving Your Desk
To lock
C. Tone771
extension PIN* 
(max. 10 digits)To unlock
770
Extension 
Dial Lock
Setting the Telephone According to Your Needs
Set
Cancel
C. Tone
0Both Calls
Outside Calls
Intercom Calls
1
2
1
0
Extension 
Feature Clear Do Not Disturb790C. Tone
To set
AM
PM76010
1
once
daily
C. Tone
0
1
hour/minute
(4 digits)
To cancel To stop or answer the ring back
7600C. Tone/
Timed 
Reminder
Receiving
Call WaitingTone
To set/cancel for outside calls To set/cancel for intercom calls
No Call
Whisper OHCA
C. Tone731
0
1
3
732Tone No tone
0
1C. Tone
C. Tone
•  For more details, refer to the Business Telephone System User Manual or consult 
your dealer.
  You can change the flexible CO buttons to the feature buttons.
  “Location of Controls” is shown on pages 6-7.
71
*PIN: Personal Identification Number
— 5 —
OR 
						

							Location of Controls
1PROGRAM: Used to enter and exit 
the personal programming mode.
4FWD/DND (Call Forwarding/Do Not 
Disturb): Used to perform Call 
Forwarding or Do Not Disturb.
2CONF (Conference): Used to 
establish a multiple party conversation.
3INTERCOM: Used to make or receive 
intercom calls.
6AUTO ANS (Auto Answer)/MUTE: 
Used to receive an incoming call in 
hands-free mode or mute the 
microphone/handset during a 
conversation.
5FLASH/RECALL: Used to disconnect 
the current call and make another call 
without hanging up.
7AUTO DIAL/STORE: Used for 
System/Personal Speed Dialing or 
storing program changes.
8REDIAL: Used to redial the last 
dialed number.
TRANSFER: Used to transfer a call 
to another party.
9
10HOLD: Used to place a call on hold.
— 6 —
16
14
15
13
91011
Microphone Headset Jack
1
2
3
4
6
7
8
5
LCD (Liquid Crystal Display) with Backlight
12 
						

							11SP-PHONE (Speakerphone): Used 
for the hands-free operation.
12Navigator Key: Used to adjust the 
volume and select desired items for 
each function.
14PAUSE: Used to insert a pause 
during dialing.
15MESSAGE: Used to leave a message 
waiting indication or call back the 
party who left the message waiting 
indication.
13Flexible Outside (CO) Line Button: 
Used to make or receive an outside 
call. Pressing this button seizes an 
idle outside line automatically. (Button 
assignment is required.) Also used as 
feature buttons. (Button assignment is 
required.)
Location of Controls
16Message/Ringer Lamp: When you 
receive a call, the lamp flashes red. 
When someone has left you a 
message, the lamp stays on red.
Setting
01
While on-hook 
LCD Contrast/Headset Mode
Ring Tone
01
08Press Twice.
*1  The ring tone pattern of patterns 09 to 30 is the same as pattern 01.
61
LCD Contrast
Headset Mode
(CO)/
Speaker/Ringer/Handset/Headset Volume   
Speaker Volume
Handset/Headset Volume 
Press UP or DOWN.
Ringer VolumeWhile on-hook or receiving a call While in hands-free conversation
While using the handset or headset
Press UP or DOWN.
— 7 —
0
While on-hook 
LCD Backlight
4
0
1
2
Automatic
Always On
Always Off*2 *1
*2  Default setting: Automatic 
						

							Settings on the Programming Mode
To exit To enter the program mode
Operation
Call Waiting Tone 
Type Selection Alternate Receiving-
Ring/Voice
90
extension PIN same PIN
Tone 1 Tone 201/
0
1Ringing (Tone Call)
Ring only2
Directly
To set an extension PIN
To change a stored extension PIN to new one
21
stored extension PIN same PINnew PIN
32
Intercom
1
0
1
2
No line
An idle outside line
A CO/ICD Group
button
CO button no.9
Station Programming
Data Default Set#
Direct Station
Selection 
One-touch 
Dialing
FWD/DND
- Both calls
1extension 
no.
2desired no.
41
Account
Conference48
49
/+
/
2
0
2
No line
The longest 
ringing line
An assigned 
outside button
CO button no.
0
/+
42
43
FWD/DND
- Outside calls
FWD/DND
- Intercom calls
Incoming Call
Distribution 
Group (ICD
Group)
ICD Group no.
30
55Log in/
Log-out
Call Waiting for 
Outside calls
No (No tone)Yes (Tone)01/
No Call Tone01/Whisper OHCA3/
30
31
Preferred Line
Assignment-Outgoing
Preferred Line
Assignment-Incoming
Call Waiting 
Selection
#
Loop-CO
(L-CO)
Single-CO
(S-CO)
0CO line no.
(Voice Call)
Extension PIN 
[Personal Identification 
Number]
(PIN-max.10 digits)
3
1
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
(CO)
— 8 — 
						

							Note
— 9 — 
						

							PSQX4007ZA  KK0306SY0  2006 Panasonic Communications Co., Ltd. All Rights Reserved.
SERIAL NO.
(found on the bottom of the unit)DATE OF PURCHASE
NAME OF DEALER
For your future reference
DEALERS ADDRESS
DEALERS TEL. NO.
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park, 
Carolina, Puerto Rico 00985
http://www.panasonic.com/csd