Panasonic Kxt-t2315 Speaker Phone User Guide

           PANASONIC
PANASONICPANASONIC PANASONIC
Speaker Phone
Easa-Phone
                                                  Model No. KX-T2315
For product service
•  Panasonic Service centers are listed in the service center directory.
•  Call 1-800-545-2672 for the location of an authorized service center.
When you ship the product
•  Carefully pack your unit, preferable in the original carton.
•  Attach a letter, detailing the symptom, to the outside of the carton.
Symptom...

2
Please read IMPORTANT SAFETY INSTRUCTIONS On page 33 before
use.  Read and understand all instructions.
FEATURES
Thank you for purchasing the Panasonic Telephone.
The KX-T2315 features include:

 Local Mode
The unit can be set to prohibit the user from making long-distance and
overseas calls.

 Built-in Speakerphone
To converse “hands-free” or have conference calls.

 One-Touch/Speed Dialing
For up to 20 16-digit telephone numbers plus 8 one-touch automatic dialing
buttons.

 Switchable Tone/Pulse...

3
CONTENTS
Features            2
Contents            3
Preparation
Location of Controls and Jack 
4
Battery Installation 
5
Connection 
5
Initial Settings 
6
Operation
Making and Receiving Calls 
7
Storing Numbers  8
Automatic Dialing  10

 Dialing

 Correcting an Error while Storing  10

 Erasing Stored Numbers 10

 Confirming a Stored Number      11
Other Features
        
Mute Operations 11
Tone Button Usage 11
Pause Button Usage   11
Hold12 

4
LOCATION OF CONTROLS AND JACK
1) Direct Call Button:    They are used to dial telephone numbers already stored in them.
                                           (One-Touch Dialing)
2) 
Memory Card:    This card is used to write the names of the persons
                                     Whose phone numbers have been stored in the speed
                                     Dialing buttons.  On the reverse of this card, find
                                     Directions for automatic dialing and...

5
BATTERY INSTALLATION
Three R6 (AA, UM-3) size batteries serve as the power source to activate
the SP-PHONE fully, and to retain the stored phone numbers in memory.
1)  Remove the wall mounting adapter from the bottom of the unit.
2)  Open the battery compartment cover.
3)  Insert the three R6(AA,UM-3) size batteries observing the correct
polarity, then close the compartment cover.
4)  Insert the tabs of the wall mounting adapter into the openings of the unit,
then push it in the direction of the arrow....

6
INITIAL SETTINGS
1)  Dialing Mode Selector:
      
Set to “Tone”.  If dialing can not be done, set to “Pulse”.
(Dialing Mode Selector Button is located on the mid-right side of your Panasonic
phone.)
2) Volume Selector:
      
Used to adjust the sound level from the built-in speaker.
(Volume Selector Button is located on the top right side of your Panasonic
phone.)
1)  Select the Ring Volume:
HIGH: The ringing sound will be high.
LOW: The ringing sound will be low.
OFF:  The telephone will not ring....

7
MAKING AND RECEIVING CALLS
Making calls with a handset
1) Lift the handset.
2) Dial the telephone number.
3) Speak to the other party.

 You can switch to the speakerphone at anytime by pressing the SP-PHONE
button.  You can replace the handset on the cradle
.
4)  Hang up when finished.
Making calls with the speakerphone
1)  Press the SP-PHONE button.

  The SP-PHONE indicator will light.
2) Dial the telephone number.
3)  Speak to the other party.

  You can also switch to the handset at anytime by...

8
MAKING AND RECEIVING CALLS (continued)
Receiving Calls
1) Lift the handset.
      Press the SP-PHONE button.
2)  Speak to the calling party.
Speak into the microphone.
Redialing
Press the Redial button when the line is busy.

 Pressing the Redial button enables you to redial once.
STORING PHONE NUMBERS

 There are 20 memory stations, each station is capable of storing 16 digits.

 There are 8 Direct Call buttons, each is capable of storing 16 digits.  Each
Dialing button serves as a memory station.
Be...

9
STORING PHONE NUMBERS (continued)
4) Press the Auto/Store button to store the number into memory.
5)  After storing all the numbers, press the Program button.

 The STORE indicator light goes out.
NOTE:  When pressing the station number for speed dialing, use the digits 01, 02,
             03, …09, etc., as 1, 2, 3, …9, will not be recognized by the phone.
 Home Use
One-Touch Dialing
1) Press the Program button until the Store indicator light is on.
2) Press the Direct Call button.
3)  Dial the...

10
AUTOMATIC DIALING
Speed Dialing
1)  Lift the handset, or press the SP-PHONE button.
2) Press the Auto/Store button, then press the station number.  (01 to 20)
3)  Speak to the other party.
One-Touch Dialing
1)  Lift the handset, or press the SP-PHONE button.
2) Press the Direct Call button.
3)  Speak to the other party.

 To change a stored number, repeat the steps of “Storing Phone Numbers”.

 If the batteries are not installed, programming and speakerphone operation can
not be done.
Correcting an...