Panasonic Kx Wp1050 Information Manual

Quick Start Guide
Wi-Fi Phone for Skype™ 
Executive Travel Set
Model No. KX-WP1050
Thank you for purchasing a Panasonic Wi-Fi Phone for Skype  
Executive Travel Set.
Please read this Quick Start Guide before using the unit and save for future 
reference.
For further details, please read the Operating Instructions included in the 
CD-ROM. 
The Operating Instructions are in PDF format. Please note that Adobe® 
Reader® (6.0 or later) or Acrobat® Reader (5.0 or later) is required to view 
the Operating...

23
1
Select the appropriate installation procedure according to where you want 
to use the unit.
– In a hotel room: Follow the instructions 2-A on this page.
– At home:
 Follow the instructions 2-B on page 4.
Packing the accessories
2Installing the base unit
Ô
Included accessories
No.Accessory itemQuantity
1Ethernet cable (approx. 0.5 m [1.6 feet])1
2Charge cable (approx. 0.5 m [1.6 feet])1
3AC cord*1 (approx. 1.7 m [5.6 feet])1
4AC adaptor for base unit (approx. 1.83 m [6 feet])1
5Base unit (Wireless...

45
2. Installing the base unit
Ô
2-B  While you are at home
The base unit has 2 modes of operation for use at home: AP (Bridge) mode 
and Router mode.
–  AP (Bridge) mode is designed for the case when you have an existing 
router or modem (cable or DSL) with a built-in router. 
–  Router mode is designed for the case when you only have a standard 
cable or DSL modem.
With an EXISTING ROUTER or MODEM with a built-in 
ROUTER   

If you install the base unit with your existing router or modem with a...

67
3-A  Initialization Setup
When you log in the base unit for the first time, you must register the 
network settings you use for HOME or HOTEL mode as a profile in 
Initialization Setup using the Web browser on the computer you connected 
to the base unit’s “LAN” port.
Important:
L�Required Web browser: 
– Microsoft® Internet Explorer® 6.0 or later for Windows® 
– Mozilla® Firefox® 1.5 or later for Windows
Operating tips:
[  ]:  The words in the brackets indicate button names displayed on the 
computer...

89
3. Setting up the base unit
Example: When you select [DHCP]
8  Configure the settings referring to the Internet service provider’s setup 
information (or instructions provided by the hotel), then click [Next>].
L�If your Internet service provider or the hotel you are staying in does not 
specify any of the settings, leave the data fields blank except for MTU 
entry.
L�The Save Settings page is displayed.
9  Confirm the settings you are about to save, then click [Save].
L�The setting that you have just...

10
4. Setting up the handset
ÔÔ
4-B  Power on / Sign in to Skype
To use the handset, you need a Skype account and need to connect to a 
network and sign in to Skype. If you do not have a Skype account, you can 
create it using the handset.
Operating tips:
{  }:  The words in the brackets indicate button names/soft key names on 
the handset.
“  ”:  The words in quotations indicate menu items displayed on the handset 
screen.
Starting up for the first time
Perform the following procedures after installing...

1112
4. Setting up the handset
Ô
Starting up for the second time
1  Press and hold {}} for 2 seconds to turn on the handset.
L�The handset starts searching for available networks. If any networks 
you normally use are already in your preferred networks list, the 
handset automatically connects to one of the networks in the list.
2  After a network connection is complete, select “Sign in to Skype”. 
i {Select}
L�If the handset is set to “Auto sign in” and you did not sign out 
the previous time, the Idle...

1314
6-A  Adding contacts
You can add up to 500 contacts to your contact list. If you have an existing 
Skype account, your contact list is automatically downloaded when you 
sign in. If you are new to Skype and have just created an account, your 
contact list will be empty. You will need to add contacts to your list.
Adding Skype contacts
1  {Menu} (middle soft key)
2  “Add contact” i {Select}
3  “Skype” i {OK}
4  Enter the Skype name (max. 32 characters; see 
section 6-C on page 14 for information on...

1516
For other troubleshooting, please see the Operating Instructions included 
in the CD-ROM. You can also get up-to-date support information from our 
website: http://www.panasonic.com/help
ProblemCause/solution
The unit does not work.•  Make sure the battery is installed correctly and 
fully charged (pages 8-9).
•  Check the connections (pages 2-5).
•  Unplug the base unit’s AC adaptor to reset the 
unit. Reconnect the adaptor and try again.
•  The handset has not been registered to the 
base unit....