Panasonic Kx Th112 Operating Instructions Manual

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp11
If you subscribe to a DSL service
Please attach a noise filter (contact your DSL provider) to the telephone line between the 
base unit and the telephone line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 31) do not function properly.
To connect to a 2-line telephone jack
For this connection, please purchase a Panasonic 2-line splitter (page 4).
Example: DSL line is line...

Preparation
12For assistance, please visit http://www.panasonic.com/phonehelp
Setting up the handset
Battery installation/replacement
1Press the notch of the handset cover 
firmly, and slide it in the direction of the 
arrow. 
LIf necessary, remove the old battery.
2Insert the battery (A), and press it 
down until it snaps into position (B). 
Then close the handset cover (C, D).
Important:
LUse only the rechargeable Panasonic 
battery noted on page 4.
Attention:
A nickel metal hydride battery that is...

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp13
Battery level
Note:
LWhen the battery needs to be charged, 
the handset beeps intermittently during 
use.
Panasonic battery performance
Note:
LBattery operating time may be 
shortened over time depending on 
usage conditions and surrounding 
temperature.
LBattery power is consumed whenever 
the handset is off the base unit, even 
when the handset is not in use. The 
longer you leave the handset off the 
base unit, the less time...

Preparation
14For assistance, please visit http://www.panasonic.com/phonehelp
Controls
Base unit
A{LINE1}
LINE1 indicator
B{LINE2}
LINE2 indicator
C{CONF} (Conference)
D{HOLD}
E{MEMO}
F{LINE SELECT}
G{ANSWER ON}
ANSWER ON indicator
H{EDIT}
I{ERASE}
J{STOP}
K{MESSAGE}
LAntenna
MSpeakerN{TRANSFER} {INTERCOM}
OIN USE indicator
PDisplay
QCELLULAR SELECT {1}, {2}, {3}, {4}, 
{5}
RCharge contacts
S{*} (TONE)
T{PAUSE} {REDIAL}
U{SP-PHONE} (Speakerphone)
SP-PHONE indicator
V{MUTE}
W{FLASH} {CALL WAIT}
XMIC...

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp15
Handset
Using the joystick ASpeaker
BDisplay
CHeadset jack/Audio jack
D{C} (TALK)
EJoystick
F{s} (SP-PHONE)
G{*} (TONE)
H{PAUSE} {REDIAL}
IMicrophoneJCharge indicator/Ringer indicator/
Message indicator
KReceiver
LSoft keys
M{OFF}
N{MUTE} {CLEAR}
O{HOLD} {INTERCOM}
P{FLASH} {CALL WAIT}
QCharge contacts
The handset joystick can be used to 
navigate through menus and to select 
items shown on the display, by pushing it 
up, down,...

Preparation
16For assistance, please visit http://www.panasonic.com/phonehelp
Understanding the indicators
Base unit line buttons
The line buttons ({LINE1}, {LINE2}) show the status of each line as follows.
Base unit CELLULAR SELECT button ({1} to {5})
The CELLULAR SELECT button ({1} to {5}) shows the status as follows.
StatusMeaning
Light off The line is available.
Light on The line is in use.
Flashing rapidly A call is being received.
Flashing A call is put on hold or the answering system is answering...

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp17
Displays
Base unit display items
Handset display items
Displayed 
itemMeaning
Flashes when the date 
and time need to be set.
Ringer for both line 1 and 
line 2 on the base unit is 
off.
Line 1 or line 2 ringer on 
the base unit is off.
Call privacy mode is on.
The line icon is displayed 
when the displayed line is 
selected for the answering 
system.
Flashing:
– the answering system is 
answering a call on that 
line.
– you...

Preparation
18For assistance, please visit http://www.panasonic.com/phonehelp
Handset soft keys
The handset features 2 soft keys and a 
joystick. By pressing a soft key, or by 
pressing the center of the joystick, you can 
select the feature or operation indicated by 
the soft key icon shown directly above it.
Menu icons
When in standby mode, pressing {MENU} 
(center of joystick) on the handset or 
{MENU} on the base unit reveals the main 
menu. From here you can access various 
features and settings....

Preparation
For assistance, please visit http://www.panasonic.com/phonehelp19
Symbols used in these 
operating instructions
Symbols used at the end of titles
Symbols used for operations 
Setting the unit before 
use
Display language Y^
1{MENU} (center of joystick) i h i 
{SELECT}
2“Change language” i {SELECT}
3Select the desired setting. (Default: 
“English”)
4Press the center of joystick to save. i 
{OFF}
Note:
LIf you select a language you cannot 
read, press the center of joystick, 
{#}{1}{1}{0}{1},...

Preparation
20For assistance, please visit http://www.panasonic.com/phonehelp
Dialing mode Y^
If you cannot make calls, change this 
setting depending on your telephone line 
service.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
LYou only need to program this setting 
once, using either the handset or base 
unit.
1{MENU} (center of joystick) i h i 
{SELECT}
2“Set tel line” i {SELECT}
3“Set dial mode” i {SELECT}
4Select the desired setting. (Default: 
“Tone”) i {SAVE} i {OFF}...