Panasonic Kx Tgh260 Quick Guide

PNQW3912ZA    TT1113MG0 Printed in Malaysia
Connections
Base unit
1 Connect the AC adaptor to the unit by pressing the plug firmly.2 Fasten the cord by hooking it.3 Connect the AC adaptor to the power outlet.4 Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.5 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.Note:LUse only the supplied Panasonic AC adaptor PNLV226.
1
4
3
4
5
2
Charger
1 Connect the AC adaptor to...

– 2 –
Battery installation/Battery charging
Charge for about 7 hours.
Note:
LUSE ONLY rechargeable Ni-MH batteries AAA (R03) size
 ().LDo NOT use Alkaline/Manganese/Ni-Cd batteries.
LConfirm correct polarities (S, T).
LFollow the directions on the display to set up the unit.
LConfirm “Charging” is displayed 
().
Operating tips
Soft keysBy pressing a soft key, you can select the feature 
shown directly above it on the display. Pay attention 
to the display to see what functions the soft keys are 
assigned...

– 3 –
Date and time (Handset)
1{MENU} (right soft key) (1)12Enter the current month, date, and year. s {OK}3Enter the current hour and minute (12-hour clock format).4*: Select “AM” or “PM”. s {SAVE} s {OFF}
Recording your greeting message for the answering system 
for the landline (Handset)
If you use a pre-recorded greeting message, you do not need to record your own greeting 
message.
1{MENU} (right soft key) (3)2 s {r}: “Yes” s {SELECT}2After a beep sounds, hold the handset about 20 cm (8 inches) away...

– 4 –
Pairing a Bluetooth cellular phone
1Handset:
For CELL 1: {MENU} (right soft key) (6241
For CELL 2: {MENU} (right soft key) (6242
LAfter the corresponding CELL indicator on the base unit starts flashing, the rest of the 
procedure must be completed within 5 minutes.
2Your cellular phone:
While the corresponding CELL indicator is flashing, follow the instructions of your cellular 
phone to enter the pairing mode.
LDepending on your cellular phone, it may ask you to enter the Bluetooth PIN (default:...

– 5 –
Connecting/disconnecting the cellular phone
Auto connection to the Bluetooth devices (cellular phones or headset)
The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change 
the interval (default: “1 min”), see the operating instructions.
LWhen 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 
2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its 
connection from other Bluetooth...

– 6 –
Basic operations
Making/Answering calls (Handset)
Making cellular calls1Dial the phone number. s {CELL}
LWhen the cellular line only mode is set, you can also press 
{C}/{s} instead of {CELL}.
LWhen only 1 cellular phone is paired, the unit starts dialing.
2When 2 cellular phones are paired:
{r}: Select the desired cellular phone. s {SELECT}
Making landline callsDial the phone number. s {C}/{s}
Answering calls{C}/{s}/{w}
To hang up{OFF}
To adjust the receiver/
speaker volumePress {^} or {V}...

– 7 –
Phonebook (Handset)
Adding entries1{

– 8 –
Using Bluetooth devices
Copying phonebook entries from a Bluetooth cellular phone (phonebook transfer)
You can copy phonebook entries from the paired cellular phones or other cellular phones (not 
paired) to the unit’s phonebook.
1Handset: {MENU} (right soft key) (6182Handset:
To copy from paired cellular phones: 
{r}: Select the desired cellular phone. s {SELECT}
LCopied items are stored to the group (“Cell 1” or “Cell 2”) which the cellular phone is 
paired to. 
To copy from other cellular phones...

– 9 –
Using a Bluetooth wireless headset (optional) for landline calls
By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly 
for landline calls.
LOnly 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular 
lines, or the headset and 1 cellular line).
Pairing a headset to the base unit1Your headset:
Set your headset to pairing mode.
LRefer to your headset operating instructions.
2Handset:
{MENU} (right soft key) (621
1 Pair...

– 10 –
Frequently asked questions
QuestionCause/solution
Why is _ displayed?LThe handset is too far from the base unit. Move closer.
LThe base unit’s AC adaptor is not properly connected. Reconnect 
AC adaptor to the base unit.
LThe handset is not registered to the base unit. Register it.
1Handset: {MENU} (right soft key) (13)2Base unit: Press and hold {LOCATOR} for about 5 seconds.3Handset: Press {OK}, then wait until a long beep sounds. 
Why am I unable to pair a 
cellular phone to the base...