Panasonic Kx Tga410 Installation Manual

Thank you for purchasing a Panasonic product.
Please read this installation manual before using the unit and 
save it for future reference.
For assistance, visit our Web site:
http://www.panasonic.com/help 
for customers in the U.S.A. or 
Puerto Rico.This unit is an additional handset compatible with the following 
series of Panasonic Digital Cordless Phone: 
KX-TG4131/KX-TG6591/KX-TG6631/KX-TG6641/
KX-TG7621/KX-TG7641
You must register this handset with your base unit before it can 
be used. This...

2For assistance, please visit http://www.panasonic.com/help
Accessory information
Supplied accessories
*1 PNLC1018ZB: Black, PNLC1018ZM: Metallic gray
PNLC1018ZN: Champagne gold
*2 PNYNTGA410BR: Black, PNYNTGA410MR: Metallic gray
PNYNTGA410NR: Champagne gold
*3 The handset cover comes attached to the handset.
Note:
LPlease read the base unit’s operating instructions for additional/
replacement accessories.
Setting up
Connections/Wall mounting
Accessory item/Order numberQuantity
Charger
*11
AC...

For assistance, please visit http://www.panasonic.com/help3
Note:
LUse only the supplied Panasonic AC adaptor PNLV226.
LThe AC adaptor must remain connected at all times. (It is normal for 
the adaptor to feel warm during use.)
LMake sure that the wall and the fixing method are strong enough to 
support the weight of the unit.
Battery installation/Battery charging
Important:
LUse the supplied rechargeable batteries. For replacement, we 
recommend using the Panasonic rechargeable batteries noted on 
page...

4For assistance, please visit http://www.panasonic.com/help
Registering a handset to a base unit
1
Base unit:
Press and hold {LOCATOR} for about 5 seconds until the registration 
tone sounds.
LIf all registered handsets start ringing, press {LOCATOR} again to 
stop, then repeat this step.
2Handset:
Place the handset on the base unit or charger, then wait until a long 
beep sounds and w is displayed.
Note:
LIf an error tone sounds, or if _ is displayed, register the handset 
according to the base unit’s...

For assistance, please visit http://www.panasonic.com/help5
Installation
LTo prevent the risk of fire or electrical shock, do not expose the product to rain or 
any type of moisture.
LDo not place or use this product near automatically controlled devices such as 
automatic doors and fire alarms. Radio waves emitted from this product may 
cause such devices to malfunction resulting in an accident.
CAUTION
Installation and location
LThe AC adaptor is used as the main disconnect device. Ensure that the AC...

6For assistance, please visit http://www.panasonic.com/help
Important safety instructions
When using your product, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Do not use this product near water for example, near a bathtub, washbowl, 
kitchen sink, or laundry tub, in a wet basement or near a swimming pool.
2. Do not use the telephone to report a gas leak in the vicinity of the leak.
3. Use only the power...

For assistance, please visit http://www.panasonic.com/help7
FCC and other information
This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 
68.316.
When you hold the phone to your ear, noise might be heard in your Hearing Aid. 
Some Hearing Aids are not adequately shielded from external RF (radio frequency) 
energy. If noise occurs, use an optional headset accessory or the speakerphone 
option (if applicable) when using this phone. Consult with your audiologist or 
Hearing Aid...

8For assistance, please visit http://www.panasonic.com/help
– Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Warning:
LThis product complies with FCC radiation exposure limits set forth for an 
uncontrolled environment.
LThis handset may not be collocated or operated in conjunction with any other 
antenna or transmitter.
LFor body-worn operation, the handset...

For assistance, please visit http://www.panasonic.com/help9
Notes
TGA410(e).fm  Page 9  Monday, November 8, 2010  4:33 PM 

10For assistance, please visit http://www.panasonic.com/help
One Panasonic Way, Secaucus, New Jersey 07094
© Panasonic System Networks Co., Ltd. 2010
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
     (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the base unit’s
Operating Instructions.  If your product is not working properly. . .
IMPORTANT!
Visit our Web site: http://www.panasonic.com/help...