Panasonic Kx Tg9581 Quick Guide

							– 11 –
Using a Bluetooth wireless headset (optional) for landline calls
By pairing a Bluetooth headset to the base unit, you can have a hands-free conversation wirelessly for 
landline calls.
L1 headset can be paired to the base unit. However, only one Bluetooth device (cellular phone or headset) 
can be connected to the base unit at a time.
Pairing a headset to the base unit (Handset/Base unit)
1Your headset:
Set your headset to pairing mode.
LRefer to your headset operating instructions.
2{MENU}(621
1 Pair using the handset or base unit.
2 Paring
3If your headset PIN is “0000”, go to step 4. 
If your headset PIN is other than “0000”, press {CLEAR}, then enter your headset PIN.
LTypically, default PIN is “0000”. Refer to the headset operating instructions.
4Press {OK}, then wait until a long beep sounds. s {OFF}/{EXIT}
LWhen the HEADSET indicator on the base unit lights up, the headset is available for use.
Operating a Bluetooth wireless headset using a landline (Base unit)
Refer to your headset operating instructions for headset operations.
NAnswering landline calls with your headset
To answer a landline call, turn on your headset referring to your headset operating instructions.
When you finish talking, turn off your headset referring to your headset operating instructions.
LIf you cannot hang up the call using your headset, press {s} on the base unit 2 times.
NSwitching between the base unit and your headset 
You can switch between the base unit and your headset:
−during a landline call with the base unit speakerphone.
−during an intercom call between the base unit and handset.
−while listening to messages recorded on the base unit answering system.
To switch to your headset:
Press {HEADSET} on the base unit.
To switch to the base unit:
Press {s} on the base unit.
Using Bluetooth devices
2
1
TG958x_(en)_QG.fm  Page 11  Thursday, July 3, 2014  3:38 PM 
						

							– 12 –
Frequently asked questions
QuestionCause/solution
Why is _ displayed?LThe handset is too far from the base unit. Move closer.
LThe base unit’s AC adaptor is not properly connected. Reconnect AC 
adaptor to the base unit.
LThe handset is not registered to the base unit. Register it.
1Handset: {MENU}(13)
2Base unit: Press and hold {LOCATOR} for about 5 seconds.
3Handset: Press {OK}, then wait until a long beep sounds. 
Why am I unable to pair a cellular 
phone to the base unit?LDepending on the compatibility of the cellular phone, you may not be 
able to pair it to the base unit. For more information, please visit 
http://www.panasonic.com/link2cell
LConfirm that the Bluetooth feature of your cellular phone is turned on. 
You may need to turn this feature on depending on your cellular 
phone.
Why is there no dial tone? 
(cellular line)LMake sure that the CELL indicator lights up and the cellular phone is 
connected to the base unit.
LThe cellular phone has not been paired to the base unit. Pair the 
cellular phone.
How can I increase the handset 
volume level?LPress the navigator key {^} repeatedly while talking.
Why is the conversation noisy or 
cutting off?LTry to relocate the base unit so that distance to the handset is 
minimized.
LIf the same problem occurs even if the handset is next to the base 
unit, please visit: http://www.panasonic.com/support
Can I add another accessory 
handset to my base unit?LYes, you can add up to 12 handsets (including the handset(s) sold 
with your base unit) to a single base unit.
LTo purchase additional accessory handset(s) (KX-TGA950),
please visit: http://www.pstc.panasonic.com
TTY users (hearing or speech impaired users) can call 1-866-605-
1277.
Can I keep the batteries charging 
all the time?LYou can leave the handset on the charger anytime. This will not harm 
the batteries.
How can I answer a call waiting 
call (2nd call)?LPress {CALL WAIT} when you hear the call waiting tone.
TG958x_(en)_QG.fm  Page 12  Thursday, July 3, 2014  3:38 PM