Panasonic Kx Tg572 Operating Instructions Manual

Operating Instructions
Digital Corded/Cordless Answering System
Model No.KX-TGF350
KX-TGF352
KX-TG572SK KX-TGF353 
 
 
  
 
   
Model shown is KX-TGF350.
Before initial use, see “Getting Started” on
page 8.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for future
reference.
Consulte  “Guía Rápida Española”, página 57.
For assistance, visit our Web site:  www.panasonic.com/support for customers in the U.S.A.
or Puerto Rico....

Introduction
Model composition .............................................. 3
Accessory information  ........................................ 3
Important Information
For your safety  .................................................... 5
Important safety instructions  ...............................6
For best performance  ......................................... 6
Other information  ................................................ 6
Specifications...

Model composition
SeriesModel No.Base unitHandset
Part No.Part No.Quantity
KX-TGF350 seriesKX-TGF350KX-TGF350KX-TGFA301
KX-TGF352KX-TGF350KX-TGFA302
KX-TG572SKKX-TGF350KX-TGFA302
KX-TGF353KX-TGF350KX-TGFA303
Accessory information
Supplied accessories
No.Accessory item/Part number
Quantity
KX-TGF350KX-TGF352
KX-TG572SKKX-TGF353
AAC adaptor/PNLV226Z111
BTelephone line cord*1111
CDesk stand/Wall mounting adaptor *2,
 *3111
DCorded handset *4111
ECorded handset cord *5111
FRechargeable batteries *6246...

Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information (page 61).
Accessory itemModel number/Specifications
Rechargeable batteriesHHR-4DPA*1
R To order, please visit
www.panasonic.com/batterystore
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
HeadsetKX-TCA60, KX-TCA93, KX-TCA400, KX-TCA430
T-adaptorKX-J66
Range extenderKX-TGA405 *2
Key detectorKX-TGA20*3
*1 Replacement batteries may have a different capacity from that of...

For your safety
To prevent severe injury and loss of life/property, read this
section carefully before using the product to ensure
proper and safe operation of your product.
WARNING
Power connection
RUse only the power source marked on the product.
R Do not overload power outlets and extension cords.
This can result in the risk of fire or electric shock.
R Completely insert the AC adaptor/power plug into the
power outlet. Failure to do so may cause electric shock
and/or excessive heat resulting in a...

Note when using alkaline batteries for power backup
RThe batteries should be used correctly, otherwise the
unit may be damaged due to battery leakage.
R Do not charge, short-circuit, disassemble, or heat the
batteries.
R Do not dispose of batteries in a fire.
R Remove all the batteries when replacing.
R Do not mix old, new or different types of batteries.
R It is recommended that batteries are replaced annually.
R It is recommended that batteries are replaced after a
power outage.
Important safety...

Specifications
RStandard:
DECT 6.0 (Digital Enhanced
Cordless Telecommunications 6.0)
R Frequency range:
1.92 GHz to 1.93 GHz
R RF transmission power:
115 mW (max.)
R Power source:
120 V AC, 60 Hz
R Power consumption:
Base unit:
Standby: Approx. 0.7 W
Maximum: Approx. 3.0 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % – 80 % relative air
humidity (dry)
For assistance, please visit www.panasonic.com/support7
Important Information...

Setting up
Connections
n Base unit
Connect the AC adaptor to the unit by
pressing the plug firmly.
Connect the telephone line cord to the unit
until you hear a click.
Fasten the AC adaptor cord and the telephone
line cord by hooking it.
Connect the AC adaptor to the power outlet.Connect the telephone line cord to the
single-line telephone jack (RJ11C) until you
hear a click.
A DSL/ADSL filter (not supplied) is required if
you have a DSL/ADSL service.
Connect the corded handset cord to the
corded handset...

Handset battery charging
Charge for about 7 hours.
RConfirm  “Charging ” is displayed (
).
R When the batteries are fully charged,  “Fully
charged ” is displayed.
Handset battery level
IconBattery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery performance
(supplied batteries)
OperationOperating time
In continuous use13 hours max. *1
Not in use (standby)12 days max.*1
*1 If eco mode is on.
Note:
R
Actual battery performance depends on usage
and ambient environment.
Base unit battery...

*1If  begins flashing on the base unit, replace
the batteries with new ones as soon as
possible. If you replace Ni-MH batteries with
alkaline batteries, insert the Ni-MH batteries
into the base unit again after the power is
restored so that they will be recharged.
Battery saving mode setting
This feature allows the base unit to reduce its
power consumption by limiting the available
functions and therefore extend battery life during a
power failure.
The following settings are available:
– “On ”: The unit...