Panasonic Kx Tg5451 Operating Instructions Manual

Programmable Settings
For assistance, please call 1-800-211-PANA (7262).41
Telephone settings
Dialing mode
If you cannot make calls, change this 
setting depending on your telephone line 
service.
“Tone” (default): For tone dial service.
“Pulse”: For rotary pulse dial service.
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press {>}.
3Scroll to “Set tel line” by pressing 
{V} or {^}, then press {>}.
4Scroll to “Set dial mode” by pressing 
{V} or {^}, then press {>}.
5Press {V}...

Programmable Settings
42For assistance, please call 1-800-211-PANA (7262).
Base unit settings
Base unit ringer volume
4 levels (high/medium/low/off) are 
available. The default setting is HIGH.
Important:
LMake sure the base unit is not being 
used.
Press {} repeatedly to select the 
desired volume.
LTo stop ringing, press {STOP}.
To turn the ringer off, press and hold {}.
3Scroll to “Set base unit” by pressing 
{V} or {^}, then press {>}.
4Scroll to “Ringer tone” by pressing 
{V} or {^}, then press...

Programmable Settings
For assistance, please call 1-800-211-PANA (7262).43
Base unit Talking Caller ID 
This feature must be turned on or off for 
the base unit by using the handset (page 
26). The default setting is ON.
1Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press {>}.
3Scroll to “Set base unit” by pressing 
{V} or {^}, then press {>}.
4Scroll to “Talking CallerID” by 
pressing {V} or {^}, then press {>}.
5Press {V} or {^} repeatedly to select 
“On” or “Off”.
6Press...

Programmable Settings
44For assistance, please call 1-800-211-PANA (7262).
1Handset:
Press {MENU}.
2Scroll to “Initial setting” by 
pressing {V} or {^}, then press {>}.
3Scroll to “Registration” by pressing 
{V} or {^}, then press {>}.
4KX-TG5451 base unit:
Press and hold {LOCATOR/
INTERCOM} until the CHARGE 
indicator flashes.
KX-TG5452 base unit:
Press and hold the locator/handset 
button that corresponds to the handset 
you want to re-register ({LOCATOR/
INTERCOM 1} or {LOCATOR/
INTERCOM 2}) until the...

Programmable Settings
For assistance, please call 1-800-211-PANA (7262).45
Programming via direct commands
You can also program most features using “direct commands”—special codes that take 
you directly to the feature you wish to program and allow you to select the desired setting. 
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1Press {MENU}.
2Enter the desired feature code (shown below).
3Enter the desired setting code (shown...

Programmable Settings
46For assistance, please call 1-800-211-PANA (7262).
*1 KX-TG5452 only
*2 KX-TG5453 only
Note:
LIf you make a mistake or enter the wrong code, press {OFF} then start again by 
pressing {MENU}. Caller ID number auto 
edit{0} {4}{1}: On {0}: Off page 40
Set dial mode{0} {5} {1}{1}: Pulse {2}: Tone page 41
Set flash time{0} {5} {2}{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms {6}: 110 ms
{7}: 100 ms {8}: 90 mspage 41
Set line mode{0} {5} {3}{1}: A {2}: B page 41
Ring...

Answering System Features
For assistance, please call 1-800-211-PANA (7262).47
Answering system
The unit contains an answering system 
which can answer and record calls for you 
when you are unavailable to answer the 
phone.
For details about memory capacity, see 
page 51.
Important:
LOnly 1 person can access the answering 
system (listen to messages, record a 
greeting message, etc.) at a time.
LWhen callers leave messages, the unit 
records the day and time of each 
message. Make sure the date and time...

Answering System Features
48For assistance, please call 1-800-211-PANA (7262).
To play back the greeting message
Press {GREETING CHECK}.
Erasing your greeting message
Press {GREETING CHECK}, and then 
press {ERASE} while your greeting 
message is playing.
LIf you do not re-record your greeting 
message, the unit will use a pre-
recorded greeting message.
Pre-recorded greeting message
If you do not record a greeting message, 
one of 2 pre-recorded messages will be 
played when a call is received depending...

Answering System Features
For assistance, please call 1-800-211-PANA (7262).49
Listening to messages
When new messages have been 
recorded:
– The MESSAGE indicator on the base 
unit will flash.
– The message indicator on the handset 
will flash slowly if the message alert 
feature is turned on (page 55).
The base unit display will show the number 
of messages (old and new) recorded by 
the answering system.
Example: The total number of recorded 
messages is 10.
Listening to messages using 
the base unit...

Answering System Features
50For assistance, please call 1-800-211-PANA (7262).
Note:
LCaller information for the erased 
messages will remain in the caller list.
Listening to messages using 
the handset
When new messages have been 
recorded, “New message” is displayed.
1Press {MENU}.
2Press {Select} at “Message play”.
LThe unit will announce the number of 
new messages, and will play back the 
new messages.
LTo switch to the receiver and to listen 
to the messages with privacy, press 
{C}. You can switch...