Panasonic Kx Tg2503 Operating Instructions Manual
Here you can view all the pages of manual Panasonic Kx Tg2503 Operating Instructions Manual. The Panasonic manuals for Cordless Telephone are available online for free. You can easily download all the documents as PDF.
Page 1
PLEASE READ BEFORE USE AND SAVE. 2.4GHz Cordless Phone Model No.KX-TG2503S Pulse-or-tone dialing capability Operating Instructions 1 Getting Started 2 Making/Answering Calls 3 Speed Dialer 4 One-Touch Dialer 5 Special Features 6 Things You Should Know 7 Referencia rápida Contents by Section Attach your purchase receipt here. For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer For product service •Panasonic Servicenters are listed in the...
Page 2
Getting Started1 1-A Accessories To select the dialing mode TONE (preset) or PULSE You can program the dialing mode using the handset near the base unit. The TALK indicator light must be off before programming. (#)twice (PULSE) Press PROGRAM á\AUTO Ü\OR\ (*)twice (TONE) \PROGRAM á. •To cancel during programming, press PROGRAM á. Start again from the beginning. •If 3 beeps sound during programming, a wrong key was pressed. Start again from the beginning. 1-C Settings 1-B Location of Controls Handset...
Page 3
Getting StartedSection 1 Selecting the ringer volume The TALK indicator light must be off. •To select HIGH (preset) or LOW, press Ñor Ö. Each time you press Ñor Ö, the ringer volume will change and the selected volume will ring. •To turn the ringer OFF, press and hold Öuntil 2 beeps sound. •To turn the ringer ON, press Ñ. The ringer will sound at the HIGH level. •When you replace the battery, the selected ringer volume setting will return to the factory set. To redial the last number dialed Press...
Page 4
Speed DialerSection 33 3-A Storing Phone Numbers in Memory Special Features5 1 Press PROGRAMá. •The TALK indicator flashes. 2 Enter a phone number up to 22 digits. 3 Press AUTO Ü. 4 Press a memory station number ((0)to (9)). •A beep sounds. •To store other numbers, repeat steps 1 through 4. 3-B Dialing a Stored Number Press (TALK)\AUTO Ü\the memory station number ((0)to (9)). •If your line has rotary or pulse service, any access numbers stored after pressing (TONE)will not be dialed. If you misdial...
Page 5
One-Touch Dialer4 4-AStoring a Phone Number in the DIRECT Button You can store a phone number in the (DIRECT)button. The stored number is dialed with a one-touch operation. The TALK indicator light must be off before programming. 4-BDialing a Stored Number in the DIRECT Button Press (TALK)\(DIRECT). •If your line has rotary or pulse service, any access numbers stored after pressing (TONE)will not be dialed. To erase a stored number:press PROGRAM á\AUTO Ü\(DIRECT). Special Features •If a pause is...
Page 6
Up to 11 days Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only the Panasonic KX-TCA88 headset. To order, call the accessories telephone number in section 1-A. Connecting the optional headset to the handset Open the headset jack cover, and connect the optional headset to the headset jack as shown. Things You Should Know 6 6-D Base Unit Location/Noise 6-B Battery Replacement Recharge When the RECHARGE indicator flashes or the unit beeps intermittently,...
Page 7
Things You Should KnowSection 6 6-F Before Requesting Help6-G Helpful Information Operating near 2.4GHz electrical appliances may cause interference. Move away from the electrical appliances and/or press the CH (Channel) button. The AC adaptor is used as the main disconnect device, ensure that the AC outlet is located/installed near the unit and is easily accessible. •Environment— do not place the unit in a room where the temperature is less than 5°C (41°F) or greater than 40°C (104°F). Allow 10 cm (4)...
Page 8
Levante las antenas. Referencia rápidaSección 77 7-A Preparación •El adaptador de CA debe permanecer conectado en todo momento. •Para instalar la presilla para el cinturón o un auricular opcional (n.°de pedido KX-TCA88), consulte la sección 1-D o 6-C. 2 Levante las antenas. 3 Cargue la batería durante 6 horas. •El indicador IN USE/CHARGE se encenderá. 1 Conecte como se muestra. 7-B Funcionamiento Marcación rápida Se pueden memorizar hasta 10 números de teléfono en la unidad portátil. Los botones de...