Panasonic Kx Tg2431 Operating Instructions Manual

							Useful Information
For assistance, please call 1-800-211-PANA (7262).61
Important information about subscription services
In order to use Caller ID, Call Waiting, or Call Waiting Caller ID (CWID), you must first 
contact your telephone company and subscribe to the desired service.
LFor more information, contact your telephone company.
If the Call Waiting Caller ID (CWID) feature does not function:
LYou may need to contact your telephone company to activate this specific service, even 
if you already subscribed to both Caller ID and Call Waiting with Caller ID services 
(CWID).
If you subscribe to a flat-rate bundle service that includes Caller ID, Call Waiting, 
Voice Mail, and unlimited local/regional/long distance calls, please read the 
following:
LTo use the Voice Mail service provided by the telephone company rather than the unit’s 
answering system, turn off the answering system by pressing {ANSWER ON} on the 
base unit.
This unit does not have an indicator to indicate if there are new messages in your 
mailbox service.
LTo use this unit’s answering system rather than the Voice Mail service provided by your 
telephone company, please contact your telephone company to deactivate your Voice 
Mail service.
If the telephone company cannot do this, set this unit’s “Ring count” setting so that 
this unit’s answering system answers calls before the telephone company’s Voice Mail 
service tries to answer your calls. It is necessary to check the ring count required to 
activate the Voice Mail service provided by your telephone company before changing 
this setting.
Example: To set the ring count to “2”, see page 41.
TG2431_2432(e).book  Page 61  Thursday, February 3, 2005  5:01 PM 
						

							Useful Information
62For assistance, please call 1-800-211-PANA (7262).
FCC and other information
This equipment complies with Part 68 of 
the FCC rules and the requirements 
adopted by the ACTA. On the bottom of 
this equipment is a label that contains, 
among other information, a product 
identifier in the format US:ACJ----------.
If requested, this number must be 
provided to the telephone company.
L Registration No
    ............(found on the bottom of the unit)
L Ringer Equivalence No.
    (REN).......0.1B
A plug and jack used to connect this 
equipment to the premises wiring and 
telephone network must comply with the 
applicable FCC Part 68 rules and 
requirements adopted by the ACTA. A 
compliant telephone cord and modular 
plug is provided with this product. It is 
designed to be connected to a 
compatible modular jack that is also 
compliant.
The REN is used to determine the 
number of devices that may be 
connected to a telephone line. Excessive 
RENs on a telephone line may result in 
the devices not ringing in response to an 
incoming call. In most but not all areas, 
the sum of RENs should not exceed five 
(5.0). To be certain of the number of 
devices that may be connected to a line, 
as determined by the total RENs, contact 
the local telephone company. For 
products approved after July 23, 2001, 
the REN for this product is part of the 
product identifier that has the format 
US:AAAEQ##TXXXX. The digits 
represented by ## are the REN without a 
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the 
telephone network, the telephone 
company will notify you in advance that  
temporary discontinuance of service may 
be required. But if advance notice isn’t 
practical, the telephone company will notify the customer as soon as possible. 
Also, you will be advised of your right to 
file a complaint with the FCC if you 
believe it is necessary.
The telephone company may make 
changes in its facilities, equipment, 
operations or procedures that could 
affect the operation of the equipment. If 
this happens the telephone company will 
provide advance notice in order for you 
to make necessary modifications to 
maintain uninterrupted service.
If trouble is experienced with this 
equipment, for repair or warranty 
information, please contact a Factory 
Servicenter or other Authorized Servicer. 
If the equipment is causing harm to the 
telephone network, the telephone 
company may request that you 
disconnect the equipment until the 
problem is resolved.
Connection to party line service is 
subject to state tariffs. Contact the state 
public utility commission, public service 
commission or corporation commission 
for information.
If your home has specially wired alarm 
equipment connected to the telephone 
line, ensure the installation of this 
equipment does not disable your alarm 
equipment. If you have questions about 
what will disable alarm equipment, 
consult your telephone company or a 
qualified installer.
This equipment is hearing aid compatible 
as defined by the FCC in 47 CFR 
Section 68.316.
TG2431_2432(e).book  Page 62  Thursday, February 3, 2005  5:01 PM 
						

							Useful Information
For assistance, please call 1-800-211-PANA (7262).63
When you hold the phone to your ear, 
noise might be heard in your Hearing Aid. 
Some Hearing Aids are not adequately 
shielded from external RF (radio 
frequency) energy. If noise occurs, use 
an optional headset accessory or the 
speakerphone option (if applicable) when 
using this phone. Consult with your 
audiologist or Hearing Aid manufacturer 
about the availability of Hearing Aids 
which provide adequate shielding to RF 
energy commonly emitted by digital 
devices.
WHEN PROGRAMMING EMERGENCY 
NUMBERS AND(OR)  MAKING TEST 
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain 
to the dispatcher the reason for the 
call.
2) Perform such activities in the off-peak 
hours, such as early morning or late 
evenings.
The software contained in this equipment 
to allow user access to the network must 
be upgraded to recognize newly 
established network area codes and 
exchange codes as they are placed into 
service. 
Failure to upgrade the premises systems 
or peripheral equipment to recognize the 
new codes as they are established will 
restrict the customer and the customers 
employees from gaining access to the 
network and to these codes.
This device complies with Part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions:
(1) This device may not cause harmful 
interference, and (2) this device must 
accept any interference received, 
including interference that may cause 
undesired operation.
Privacy of communications may not be 
ensured when using this phone.CAUTION:
Any changes or modifications not 
expressly approved by the party 
responsible for compliance could void 
the user’s authority to operate this 
device.
NOTE:
This equipment has been tested and 
found to comply with the limits for a 
Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are 
designed to provide reasonable 
protection against harmful interference in 
a residential installation. This equipment 
generates, uses, and can radiate radio 
frequency energy and, if not installed and 
used in accordance with the instructions, 
may cause harmful interference to radio 
communications. However, there is no 
guarantee that interference will not occur 
in a particular installation. If this 
equipment does cause harmful 
interference to radio or television 
reception, which can be determined by 
turning the equipment off and on, the 
user is encouraged to try to correct the 
interference by one or more of the 
following measures:
 Reorient or relocate the receiving 
antenna.
 Increase the separation between the 
equipment and receiver.
 Connect the equipment into an outlet 
on a circuit different from that to which 
the receiver is connected.
 Consult the dealer or an experienced 
radio/TV technician for help.
Some cordless telephones operate at 
frequencies that may cause interference 
to nearby TVs and VCRs. To minimize or 
prevent such interference, the base of 
the cordless telephone should not be 
placed near or on top of a TV or VCR. If 
interference is experienced, move the 
cordless telephone further away from the 
TV or VCR. This will often reduce, or 
eliminate, interference.
TG2431_2432(e).book  Page 63  Thursday, February 3, 2005  5:01 PM 
						

							Useful Information
64For assistance, please call 1-800-211-PANA (7262).
openLCR service for the 
Caller IQ feature
This unit is compatible with service 
provided by openLCR.
Important:
See the leaflet included with this unit for 
more information.
LIf you have any questions regarding 
the openLCR service, visit 
www.openLCR.com or call openLCR 
at 1-866-openLCR (1-866-673-6527).
LNEITHER PANASONIC 
COMMUNICATIONS CO., LTD. NOR 
PANASONIC CORPORATION OF 
NORTH AMERICA IS IN ANY WAY 
AFFILIATED WITH, OR 
RESPONSIBLE FOR THE ACTS OR 
OMISSIONS OF, OPENLCR.COM, INC. 
NEITHER PANASONIC 
COMMUNICATIONS CO., LTD. NOR 
PANASONIC CORPORATION OF 
NORTH AMERICA NOR ANY OF 
THEIR EMPLOYEES OR AFFILIATES 
OR CUSTOMERS MAKE ANY 
WARRANTIES OR 
REPRESENTATIONS, EITHER 
EXPRESS OR IMPLIED, TO ANY 
CUSTOMER OR ANY OTHER THIRD 
PARTY WITH RESPECT TO ANY OF 
THE SERVICES PROVIDED BY 
OPENLCR.COM, INC., NOR ASSUME 
NOR CREATE ANY OTHER 
OBLIGATION OF ANY KIND ON 
BEHALF OF OPENLCR.COM, INC.
LThe Caller IQ service can only be 
activated after registering with openLCR 
at www.openLCR.com. More 
information regarding the openLCR 
service is available on the Internet at 
www.openLCR.com.
FCC RF Exposure Warning:
This product complies with FCC radiation 
exposure limits set forth for an 
uncontrolled environment. To comply 
with FCC RF exposure requirements the 
base unit must be installed and operated 
with its antenna located 20 cm or more 
between antenna and all person’s body 
(excluding extremities of hands, wrist 
and feet). The handset unit may be 
carried and operated with only the 
specific provided belt-clip. Other non-
tested belt-clips or similar body-worn 
accessories may not comply and must 
be avoided. The base and handset units 
must not be co-located or operated in 
conjunction with any other antenna or 
transmitter.
TG2431_2432(e).book  Page 64  Thursday, February 3, 2005  5:01 PM 
						

							Useful Information
For assistance, please call 1-800-211-PANA (7262).65
Technical information
Base unit
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Frequency:
2.4 GHz – 2.48 GHz
Dimensions:
Approx. height 125 mm x width 140 mm x 
depth 135 mm (4
29/32 x 51/2 x 55/16)
Mass (Weight):
Approx. 312 g (0.69 lb.)
Power consumption:
Standby: Approx. 2.7 W
Maximum: Approx. 5.0 W
Power supply:
AC adaptor (120 V AC, 60 Hz)
Handset
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Frequency:
2.4 GHz – 2.48 GHz
Dimensions:
Approx. height 167 mm x width 48 mm x 
depth 31 mm (6
9/16 x 17/8 x 17/32)
Mass (Weight):
Approx. 107 g (0.24 lb.)
Power supply:
Ni-MH battery (2.4 V, 830 mAh)
Security codes:
1,000,000
Charger unit (KX-TG2432 only)
Operating environment:
5 °C – 40 °C (41 °F – 104 °F)
Dimensions:
Approx. height 65 mm x width 85 mm x 
depth 95 mm (2
9/16 x 311/32 x 33/4)
Mass (Weight):
Approx. 97 g (0.21 lb.)
Power consumption:
Standby: Approx. 1.0 W
Maximum: Approx. 3.0 W
Power supply:
AC adaptor (120 V AC, 60 Hz)
Note:
LDesign and specifications are subject to 
change without notice.
LThe illustrations in these instructions 
may vary slightly from the actual 
product.
TG2431_2432(e).book  Page 65  Thursday, February 3, 2005  5:01 PM 
						

							TG2431_2432(e).book  Page 66  Thursday, February 3, 2005  5:01 PM 
						

							✄
Useful Information
For assistance, please call 1-800-211-PANA (7262).67
Warranty
Panasonic Telephone Limited Warranty
Limited Warranty Coverage
If your telephone (identified in your Operating Instructions) does not work properly 
because of a defect in materials or workmanship, Panasonic Consumer Electronics 
Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) 
will, for the length of the period indicated on the chart below, which starts with the 
date of original purchase (“Limited Warranty period”), at its option either (a) repair 
your product with new or refurbished parts, or (b) replace it with a new or a 
refurbished product. The decision to repair or replace will be made by the 
warrantor.
    Parts    Labor
    One (1) Year  One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor. During 
the “Parts” Limited Warranty period, there will be no charge for parts. You must 
mail-in your product during the Limited Warranty period. This Limited Warranty 
excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). 
This Limited Warranty only applies to products purchased and serviced in the 
United States or Puerto Rico. This Limited Warranty is extended only to the original 
purchaser and only covers products purchased as new. A purchase receipt or other 
proof of the original purchase date is required for warranty service.
To obtain service in the USA please contact:
Panasonic Services Company, Panasonic Plus Department
20421 84th Avenue South
Kent, WA 98032
Tel: 1-800-833-9626     Fax: 1-800-237-9080
For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or 
fax (787)-768-2910. 
For Limited Warranty service for headsets if a headset is included with this product 
please call Panasonic Plus Department at 1-800-833-9626.
When shipping the unit carefully pack, include all accessories, and send it prepaid, 
adequately insured and preferably in the original carton. Include a letter detailing 
the complaint, a return address and a day time phone number where you can be 
reached.PANASONIC CONSUMER 
ELECTRONICS COMPANY, DIVISION 
OF PANASONIC CORPORATION OF 
NORTH AMERICA 
One Panasonic Way, 
Secaucus, New Jersey 07094PANASONIC PUERTO RICO, INC.
San Gabriel Industrial Park, 
Ave. 65 de Infantería, Km. 9.5,
Carolina, Puerto Rico 00985
TG2431_2432(e).book  Page 67  Thursday, February 3, 2005  5:01 PM 
						

							Useful Information
68For assistance, please call 1-800-211-PANA (7262).
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or 
workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. 
The Limited Warranty ALSO DOES NOT COVER damages which occurred in 
shipment, or failures which are caused by products not supplied by the warrantor, 
or failures which result from accidents, misuse, abuse, neglect, mishandling, 
misapplication, alteration, faulty installation, set-up adjustments, misadjustment of 
consumer controls, improper maintenance, power line surge, lightning damage, 
modification, introduction of sand, humidity or liquids, commercial use such as 
hotel, office, restaurant, or other business or rental use of the product, or service by 
anyone other than a Factory Servicenter or other Authorized Servicer, or damage 
that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER 
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE FOR 
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE 
OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED 
WARRANTY. (As examples, this excludes damages for lost time, lost calls or 
messages, cost of having someone remove or re-install an installed unit if 
applicable, travel to and from the servicer. The items listed are not exclusive, but 
are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, 
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE 
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential 
damages, or limitations on how long an implied warranty lasts, so the exclusions 
may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other 
rights which vary from state to state. If a problem with this product develops during 
or after the Limited Warranty period, you may contact your dealer or Servicenter. If 
the problem is not handled to your satisfaction, then write to the warrantor’s 
Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED 
WARRANTY, ARE YOUR RESPONSIBILITY.
TG2431_2432(e).book  Page 68  Thursday, February 3, 2005  5:01 PM 
						

							Useful Information
For assistance, please call 1-800-211-PANA (7262).69
Customer services
Customer Services Directory
Obtain Product Information and Operating Assistance; locate your nearest 
Dealer or Servicenter; purchase Parts and Accessories; or make Customer 
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/consumersupport
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at: 1-800-211-PANA (7262),
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
TTY users (hearing or speech impaired users) can call 1-866-605-1277. Purchase Parts, Accessories and Instruction Books online for all 
Panasonic Products by visiting our Web Site at:
http://www.pasc.panasonic.com
or, send your request by E-mail to:
[email protected]
You may also contact us directly at:
1-800-332-5368 (Phone)  1-800-237-9080 (Fax Only) 
(Monday - Friday 9 am to 8 pm, EST.)
Panasonic Services Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and 
Personal Checks)
Accessory Purchases
Service in Puerto Rico
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5, 
Carolina, Puerto Rico 00985
Phone (787)750-4300, Fax (787)768-2910
TG2431_2432(e).book  Page 69  Thursday, February 3, 2005  5:01 PM 
						

							Index
70For assistance, please call 1-800-211-PANA (7262).
Index
A Accessories: 5
Answering calls: 18
Answering system: 42
Auto talk: 18, 36
B Backlit display: 15
Backlit handset keypad: 15
Base unit location: 8
Battery
Charge: 11
Installation: 10
Performance: 12
Replacement: 12
Strength: 11
Belt clip: 51
C Caller ID edit: 36
Caller ID number auto edit: 28
Caller ID service: 26
Caller list
Calling back: 27
Editing: 28
Erasing: 29
Storing: 28
Viewing: 27
Call screening: 43
Call share: 20
Call Waiting Caller ID: 26
Call waiting tone: 21
Chain dial: 24
Clarity booster: 20
Conf (Conference): 32
Conference calls: 32
Controls: 13
Copy phonebook: 24, 25
Customer support: 39
D Date and time: 16
Dialing mode: 37
Display
Base unit: 15
Handset: 15
Display language: 37
E Erasing all messages: 44, 45, 47
Erasing a message: 44, 45, 47
Error messages: 55
Extension number: 31
F FCC and other information: 62Flash button: 20
Flash time: 37
Function menu
Direct commands: 40
Table: 33
G Greeting message: 42
H Handset locator: 30, 31
Headset, optional: 51
Hold: 19
I Installation
AC adaptor: 9
Base unit: 9
Charger unit: 9
Telephone line cord: 9
Intercom
Call: 30
Paging: 30
Interrupt tone: 35
K Key tone: 38
L LCD contrast: 37
Line mode: 38
Listening to messages
Base unit: 44
Handset: 45
Touch tone phone: 47
M Making calls: 17
Memory capacity: 46
Message alert: 50
Microphone
Base unit: 30, 42
Handset: 17
Mute: 19
N Navigator key: 14
Noise: 8
P Pause: 20
Phonebook
Adding: 22
Calling: 23
Copying: 24, 25
Editing: 23
Erasing: 23
Names: 22
Power failure: 10, 16, 60
Pulse service: 21
R Recording time: 49
Redial: 17
Redial list: 18
TG2431_2432(e).book  Page 70  Thursday, February 3, 2005  5:01 PM