Panasonic Kx Tg1032 Quick Guide

							PQQW15571YA    FC0107FF1017
 
Setting up
For further information, visit http://www.panasonic.com/help
Base unitCHARGE 7 HOURS
Handset
Charger
Use only the included Panasonic AC adaptor 
PQLV207.
(120 V AC, 60 Hz)
(120 V AC, 
60 Hz)
HookNoise filter
(For DSL service users)
“Click”
To single-line 
telephone jack 
          (RJ11C)“Click”
Confirm 
“Charging” is 
displayed.
5wUSE ONLY Ni-MH batteries AAA (R03) size.Do NOT use Alkaline/Manganese/Ni-Cd batteries.Install the batteries in proper order (S, T), 
matching the correct polarity.
Use only the included
Panasonic AC  adaptor 
PQLV209.
Press plug 
firmly.
Model No. KX-TG1032
 KX-TG1033
 KX-TG1034
KX-TG1035
Quick Guide


ø÷ú
?
&

ï
,ðõ
-
4ççøçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü 
						

							– 2 –
Operating tips
{}: shows button names.
Using the navigator key
Press {^}, {V}, {} to navigate 
through menus and to select items shown on 
the display.
Adjusting audio volume
Press {^} or {V} repeatedly while talking.
Date and time (Handset)
1{MENU}
2{V}/{^}: “Set date & time” i {OK}
3{V}/{^}: “Date and time“ i {OK}
4Enter the current month, day, and year by selecting 2 digits for each.
5Enter the current hour and minute (12-hour clock format) by selecting 2 digits for 
each.
6Press {*} to select  “AM” or “PM”. i {OK} i {OFF}
Adding items to the phonebook (Handset)
1{k} i {MENU}
2{V}/{^}: “New entry” i {OK}
3Enter the name (max. 16 characters). i {OK}
4Enter the phone number (max. 24 digits). i {OK}
5{V}/{^}: “Save” i {OK} i {OFF}
For further information, visit http://www.panasonic.com/help or refer to Operating 
Instructions.
{V} {^}
{}


ø÷ú
?
&

ï
,ðõ
-
4ççùçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü 
						

							– 3 –
Basic operation (Handset)
FeatureOperation
Adjusting the receiver/speaker 
volumePress {^} or {V} repeatedly while talking.
Making a call using the redial 
list{REDIAL} i {V}/{^}: Select the desired phone 
number. i {C}
Viewing the caller list and 
calling back{MENU} i {V}/{^}: “View Caller ID” i {OK} 
i Press {V} or {^} repeatedly to select the desired 
item. i {C}
Ringer volume1{MENU}
2{V}/{^}: “Handset settings” i {OK}
3{V}/{^}: “Ringer settings” i {OK}
4{V}/{^}: “Ringer volume” i {OK}
5{^}/{V}: Select the desired volume. i {OK} i {OFF}
Answering call-waiting call 
(2nd call)Press {CALL WAIT} when you hear call waiting tone.
Answering system
FeatureOperation
Auto answer on/offPress {ANSWER ON} on the base unit.
Recording your greeting 
message
(max. 2 minutes and 30 
seconds)1Press {MENU} on the handset.
2{V}/{^}: “Answering device” i {OK}
3{V}/{^}: “Record greeting” i {OK}
4Speak clearly about 20 cm (8 inches) away from 
the microphone.
5To stop recording, press {OK}.
6{OFF}
Listening to new messagesWhen the MESSAGE indicator flashes on the base 
unit, press {MESSAGE}.
Listening to old messagesWhen the MESSAGE indicator does not flash on the 
base unit, press {MESSAGE}.
Erasing a messagePress {ERASE} on the base unit during playback.
Using the answering system 
remotely1Dial your phone number from a touch tone phone.
2After the greeting message starts, enter your 
remote code. (Default remote code is “111”.)
LThe unit announces the number of new 
messages.
3Follow the voice guidance as necessary.


ø÷ú
?
&

ï
,ðõ
-
4ççúçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü 
						

							– 4 –
Frequently asked questions
QuestionCause/solution
How can I increase handset 
volume level?LPress navigator key {^} repeatedly while talking.
Why is the conversation noisy 
or cutting off?LTry to relocate the base unit so that distance from 
location to use the handset will be minimized.
LSend your unit to service, if your unit has same 
problem when the handset is next to the base unit.
Can I add another accessory 
handset to my base unit?LYes, you can add up to 6 handsets (including the 
handset(s) sold with your own base unit) to a single 
base unit.
LTo purchase accessory handset (KX-TGA101), 
please visit http://www.panasonic.com 
or call 1-800-332-5368. TTY users (hearing or 
speech impaired users) can call 1-866-605-1277.
Can I keep battery charging all 
the time?LYou can leave handset on the base unit or charger 
anytime. There is no damage to the battery.
How can I answer a call-
waiting call (2nd call)?LPress {CALL WAIT} when you hear call-waiting 
tone.
For further troubleshooting information, visit http://www.panasonic.com/help or 
refer to Operating Instructions.


ø÷ú
?
&

ï
,ðõ
-
4ççûçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü 
						

							– 5 –
Quick troubleshooting
Place the handset on the base unit, then 
check if “Charging” is displayed.
“Charging” is not displayed.
“Charging” is 
displayed.
Unplug and then plug AC 
adaptor properly to both the 
base unit and AC outlet.
Unplug the AC adaptor of the base unit and remove the 
batteries from the handset, then plug in the AC adaptor and 
insert the batteries into the handset again. Try re-registration 
as explained later in this guide.
Lift the handset, then try again.
If handset still shows the same 
message, try re-registration as 
explained later in this guide. “Charging” is still not 
displayed.
Re-registration failed.
Re-registration failed. “Charging” is 
displayed, now.
Your telephone may need service. 
Please visit http://www.panasonic.com/help for further troubleshooting. 
“No link to base. Move closer to base, try again.”
1 Handset shows:


ø÷ú
?
&

ï
,ðõ
-
4ççüçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü 
						

							– 6 –
Quick troubleshooting
Lift up the handset from the base unit or 
charger.
Press {C} (TALK) at the handset, then 
check if the display shows “Talk”.
Press {s} (SP-PHONE), 
then check if the dial tone 
is heard from the speaker 
on the back.
No dial tone
Dial tone is 
heard.
{C}
{s}
“No link to base. 
Move closer to 
base, try again.” is 
displayed.“Talk” is 
displayed.
Try remedy for 
1 on previous 
page.Check the telephone 
cord is properly 
connected to both the 
base unit and 
telephone line jack on 
the wall.Your telephone 
may need service 
when only back 
speaker provides 
a dial tone.
2 No dial tone is heard from handset.
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting. Still no dial tone
5
No link to base.
Move closer to
base, try again.
5
Talk 
w


ø÷ú
?
&

ï
,ðõ
-
4ççýçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü 
						

							– 7 –
Registering a handset to base unit
The included handset and base unit are preregistered. If for some reason the handset 
is not registered to the base unit, register the handset.
For further registration information, visit 
http://www.panasonic.com/RegisterYourHandset
Handset
Handset
Press {OK}, then wait until a beep 
sounds and w stops flashing.
Base unit
Press and hold {LOCATOR} until the 
registration tone sounds.
L Complete next step within 1 minute  
and 30 seconds.
.1%#614
{MENU}{OK}
{OK}
5
Press LOCATOR   
on base for 4sec
Then press OK
0w4
5
Press LOCATOR   
on base for 4sec
Then press OK
0w4
1{MENU}
2{V}/{^}: “Handset settings” i 
{OK}
3{V}/{^}: “Registration” i {OK}
4{V}/{^}: “HS registration” i
{OK}


ø÷ú
?
&

ï
,ðõ
-
4ççþçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü 
						

							1Read this Quick Guide or Operating 
Instructions
LIf you lost Operating Instructions, you can 
download at 
http://www.panasonic.com/help
2Visit our website:
http://www.panasonic.com/help
LFAQs and troubleshooting hints are available.
3Contact us via the web at:
http://www.panasonic.com/contactinfo
4Call us at:
1-800-211-PANA (1-800-211-7262)
LMonday - Friday 9:00am - 9:00pm (EST), 
Saturday/Sunday 10:00am - 7:00pm (EST)
To order a replacement battery,
please call: 1-800-332-5368
Or visit: 
http://www.panasonic.com/batterystore
IMPORTANT!
If your product is not 
working properly. . .


ø÷ú
?
&

ï
,ðõ
-
4ççÿçÖ”´ççå
D
Ôyæ5Ôy•™Ì
ü