Panasonic Kx Td7695 Operating Instructions Manual

Document Version 2008-01  
Operating Instructions
DECT 6.0 Portable Station
Model No.KX-TD7695
Thank you for purchasing a Panasonic DECT 6.0 Portable Station.
Please read this manual carefully before using this product and save this 
manual for future use.
Please use only the battery provided and charge the battery for about 7 hours 
before using the handset for the first time.
See page 67 for System Requirements. 

2Document Version 2008-01  
Table of Contents
Before Initial Use.............................................................................................. 4
Accessories (included) ....................................................................................... 4
Installation............................................................................................................ 5
Battery...

Document Version 2008-01   3
Character Mode Table ..................................................................................... 43
Locking the Handset Phonebook .................................................................... 44
Locking the Handset Phonebook ..................................................................... 44
Unlocking the Handset Phonebook ................................................................. 44
Unlocking the Handset Phonebook Temporarily...

Before Initial Use
4Document Version 2008-01  
Please read “Important Information” on page 60 before using. Read and understand 
all instructions.
Accessories (included)
• To order accessories, call toll free 1-800-332-5368.
Accessories (included)
AC adaptor ....................... One Charger ............................ One Battery .............................. One
[Part No.] [Part No.] [Part No.]
PQLV207 PSWETD7695M N4HHGMB00005 or HHR-P103
Belt Clip ............................ One Battery Cover...

Before Initial Use
Document Version 2008-01   5
Installation
Battery Installation
Insert the battery, and close the cover as indicated below.
Charger Connection
Connect the AC adaptor to the charger.
Charging the Battery
At the time of shipment, the battery is not charged. Please charge the battery for about 
7 hours before using the handset for the first time.
Installation
Battery Installation
Charger Connection
12
• The AC adaptor should be connected to a 
vertically oriented or floor-mounted AC...

Before Initial Use
6Document Version 2008-01  
Charger Wall Mounting
Attaching the Belt Clip
You can attach the handset to your belt by following the steps below.
Charger Wall Mounting
1.Install the two included screws in the wall, spacing them 24.5 mm (1 in) 
apart.
2.Mount the charger securely on the wall.
• Make sure that the wall that the charger will be attached to is strong enough to sup-
port the weight of the handset and charger (240 g [0.53 lb]). If not, it is necessary for 
the wall to be...

Before Operating the Handset
Document Version 2008-01   7
Location of ControlsLocation of Controls
[Back View]
Speaker The headset is an option. 
Please use only a Panasonic 
headset below.
KX-TCA86/KX-TCA91/
KX-TCA92
Open the cover.Press POWER for 
more than 2 seconds.
[Power On]
Standby mode
[Power Off]
Blank display
Up
Down Left Right
You can use the Joy-
stick to move the cursor 
in the desired direction. 
Press the center button 
to confirm a selection.
B
C
D
E
F
G
HJ
K
L
N
O M A
IL
M 

Before Operating the Handset
8Document Version 2008-01  
*1 You can talk with the other party alternately through the speaker in a quiet room.
During a conversation using a headset, Hands-free mode does not work.
Key Lock
You can lock all keys other than the Joystick while the handset is in standby mode.  Ringer/Charger Indicator Display
 Headset JackRefer to “Display” on page 14.
 TALK/SP-PHONE (Speakerphone) Key  Left/Right Soft Key
Used to make or answer calls, or toggle 
between the...

Before Operating the Handset
Document Version 2008-01   9
Meeting Mode
Meeting Mode allows you to turn off the ringer and set the handset to vibrate when calls 
are received. This can be useful in situations where you do not want to be disturbed, such 
as during a meeting.
When Meeting Mode is active, the microphone’s sensitivity is increased, and the following 
features are turned off automatically, regardless of their settings.
– Ringer Volume
– Ring On Charger
– Auto Answer
– Key Tone
– Range Alarm
–...

Before Operating the Handset
10 Document Version 2008-01  
Selecting the Display Language
You can select the desired language (English/Spanish/French).
• When set to “Auto”, the language settings of the PBX will be used.
• The display language of both the handset and PBX can be selected, and both should 
be set to the same language. For more information, refer to the user documentation for 
your PBX.
Editing the Standby Display Name
You can edit the name of the standby mode display of the handset.
• To...