Panasonic Kx Tc1486 Operating Instructions Manual

For assistance, please call: 1-800-211-PANA(7262)
“
21
Advanced Operation
For example, to enter “TOM”:
1
Press [8].
2
Press [6]three times, then wait for
3 seconds.
3
Press [6].
≥If you enter a blank, press [1].
≥To show the cursor, press  after entering a character. While entering names,
the cursor will flash on the display.
If you make a mistake while entering a name
Use  or  to move the cursor to the incorrect character, press
[MUTE/CLEAR]to delete and enter the correct character. Each time you
press...

Finding Stored Items
Make sure the unit is in the standby mode.
1
Press [AUTO/PROGRAM].
2
Press or .
≥The first item or last item is displayed.
3
Scroll to the desired item by
using or .
≥You can find the items using the memory station numbers ([0]to [9]) directly in
step 2.
≥You can exit the phone book at any time by pressing [OFF].
≥If “EMPTY” is displayed in step 2 or 3, the phone book is empty.
≥If the phone number is more than 12 digits, the whole number has not been
shown. 
The remaining numbers will...

“
23
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Editing
Make sure the unit is in the standby mode.
1
Press [AUTO/PROGRAM].
2
Press or .
≥The first item or last item is displayed.
3
Scroll to the phone book item you want to
change by using  or  , and press
[EDIT].
4
Edit the name using the dialing buttons,
or  (p. 21), up to 15 characters.
5
Press [EDIT].
6
Add a number to the current number.
≥If you do not need to change the number, go to
step 7.
≥To move the cursor, press 
or ....

“Phone Book
24
Erasing
Make sure the unit is in the standby mode.
To erase a specific caller from the Phone book
1
Press [AUTO/PROGRAM].
2
Press or .
≥The first item or last item is displayed.
3
Scroll to the phone book item you want to
erase by using  or  .
4
Press [MUTE/CLEAR].
≥A beep sounds.
≥The handset will return to the standby mode.
≥You can find the items using the memory station numbers ([0]to [9]) directly in
step 2.
≥You can exit the phone book at any time by pressing [OFF].
To erase all entries...

Special Features“
25
Advanced Operation
For assistance, please call: 1-800-211-PANA(7262)
Handset Locator
You can locate the handset or page the handset user with beep tones
from the base unit.
1
Press [HANDSET LOCATOR].
≥The IN USE/CHARGE indicator flashes. The handset beeps for 1 minute
and “PAGING” is displayed on the handset.
2
To stop paging, press [HANDSET LOCATOR]again or press [OFF]
on the handset.
Automatic Security Code Setting
Each time you place the handset on the base unit, the unit...

Call Waiting Caller ID display
If you subscribe to both Caller ID and Call
Waiting with Caller ID services (CWID), when a
second call is received while talking, the second
caller’s information will be displayed. After you
hear a call-waiting tone while talking, the unit
will display the caller’s name, the phone number
and the date and time received.
≥Please contact your telephone company for details and availability in your area.
26
“Special Features
For Call Waiting Service Users
Press  if you hear a...

For assistance, please call: 1-800-211-PANA(7262)27
Useful Information
Belt Clip
You can hang the handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
Headset Jack
When an optional headset is connected to the handset, make sure
to use the headset to talk with the caller. If you want to have a
normal cordless phone conversation, disconnect the headset.
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only a...

28
Wall Mounting
This unit can be mounted on a wall phone plate.
1
Push the lower side of the hook
(1) and pull down the hook until
it locks (2), so the tab holds
the handset.
3
Connect the AC adaptor.
Tuck the telephone line cord
inside the wall mounting
adaptor, then push it in the
direction of the arrow (1and
2).
≥The word “UP WALL” should
face upward.
≥Fasten the AC adaptor cord to
prevent it from being
disconnected.
1
2
To  P o w e r
Outlet
1
2
Hook
2
Remove the wall mounting
adaptor.
1
2
4
Connect...

29
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
5
To charge the battery:
Fit the handset hole in the tab
(1) and fix the charge contacts
(2).
≥Make sure to place the handset
with the keypad facing down.
≥The IN USE/CHARGE
indicator lights.
1
2
Ta b Hole
Adding Another Phone
This unit will not work during a power failure. To connect a standard
telephone on the same line, use the Panasonic KX-J66 T-adaptor.
To order, call the accessories telephone number on page 2.
T-Adaptor (KX-J66)...

30
If “RECHARGE” and “” are displayed after a few telephone calls even if
the battery was fully charged, replace the battery with a new Panasonic
PQWBTC1461M (P-P504) battery. To order, call the accessories
telephone number on page 2.
2
1
Battery Replacement
Black 
LeadRed 
Lead
3
Close the cover. Make sure you charge the
new battery for 15 hours.
2
Remove the old battery. 
Then install the new one.
≥Insert the battery plug into the
connector as shown in the
picture.
≥Be sure wires are free from
being...