Panasonic Kx Taw848 Programming Manual

Thank you for purchasing a Panasonic Advanced Hybrid & Wireless PBX.
Please read this manual carefully before using this product and save this manual for future use.
PSMPR Software File Version 4.0000 or later 
Document Version: 2007-02
 Model No.    KX-TAW848
Advanced Hybrid & Wireless PBX
PT Programming Manual 

2 PT Programming Manual
Introduction
About this Programming Manual
The PT Programming Manual is designed to serve as a reference to programming the Panasonic 
Advanced Hybrid & Wireless PBX using a Panasonic proprietary telephone (PT) with display.
The PT Programming Manual is divided into the following sections:
Section 1, Overview
Provides an overview of programming the PBX.
Section 2, PT Programming
Serves as reference operating instructions when using a display PT to program the PBX.
Section 3,...

PT Programming Manual 3
NOTES
 The contents of this manual apply to PBXs with a certain software version, as indicated on the 
cover of this manual. To confirm the software version of your PBX, see [190] Main Processing 
(MPR) Software Version Reference.
 Some optional service cards, PTs, and features are not available in some areas. Please consult 
your dealer for more information.
 Product specifications are subject to change without notice. 

4 PT Programming Manual
Table of Contents
1 Overview.................................................................................................. 7
1.1 Introduction ...................................................................................................................... 8
1.1.1 Introduction ........................................................................................................................ 8
1.1.2 Password...

PT Programming Manual 5
[331–346] ARS Routing Plan Table (1–16) ......................................................................................................22
[350] ARS Carrier Name ..................................................................................................................................22
[351] ARS Trunk Group for Carrier Access ......................................................................................................22
[352] ARS Removed Number of Digits for...

6 PT Programming Manual
[630] Queuing Time Table ............................................................................................................................... 32
[631] Sequences in Queuing Time Table......................................................................................................... 32
[632] Maximum Number of Agents .................................................................................................................. 32
[640] Extension User Groups of a...

PT Programming Manual 7
Section 1
Overview
This section provides an overview of programming the PBX. 

1.1 Introduction
8 PT Programming Manual
1.1 Introduction
1.1.1 Introduction
These programming instructions are designed to serve as an overall system programming reference 
for the Panasonic Advanced Hybrid & Wireless PBX. Each feature in the PBX has default settings 
that can be changed to customize the PBX to your requirements. These settings control the functions 
of the PBX, and changing them is referred to as system programming.
Only one person can perform system programming at a time. Any other...

1.1 Introduction
PT Programming Manual 9
5.It is strongly recommended that passwords of 10 numbers or characters be used for 
maximum protection against unauthorized access. For a list of numbers and characters that 
can be used in system passwords, refer to Section 1.1.3 Entering Characters.
6.If a system password is forgotten, it can be found by loading a backup of the system data 
into a PC, and checking the password using the KX-TAW848 Maintenance Console 
software. If you do not have a backup of the...

1.1 Introduction
10 PT Programming Manual
Notes
 To erase the character on the cursor, press CLEAR.
 To move the cursor to the left, press  .
 To move the cursor to the right, press  . When entering two or more characters that use 
the same button consecutively (e.g. G and I), you must press this button or the FWD/DND 
button after entering the first character.
 If SELECT is pressed, the characters for each button will be displayed in reverse order.