Panasonic Kx-T7030 Reference Manual

Panasonic 
Proprietary Telephone for 
Electronic Modular Switching System 
MODEL NO. 
KX-17030 
Illustrated Model: White 1 
KX-T7030 is compatible with all of the Panasonic Electronic Modular 
Switching Systems and can perform most functions within each system. 
Please read before use.  

Important Safety Instructions 
When using your telephone 
equipment, basic safety 
precautions should always be 
followed to reduce the risk of fire, 
electric shock and injury to 
persons, including the following: 
1. Read and understand all 
instructions. 
2. Follow all warnings and 
instructions marked on the 
product. 
3. Unplug this product from the 
wall outlet before cleaning. 
Do not use liquid cleaners or 
aerosol cleaners. Use a damp 
cloth for cleaning. 
4. Do not use this product near 
water,...

11. Unplug this product from the 
wall outlet and refer servicing 
to qualified service personnel 
under the following conditions: 
A. When the power supply 
cord or plug is damaged or 
frayed. 
B. If liquid has been spilled 
into the product. 
C. If the product has been 
exposed to rain or water. 
D. If the product does not 
operate normally by 
following the operating 
instructions. Adjust only 
those controls, that are 
covered by the operating 
instructions because 
improper adjustment of 
other...

Thank you for purchasing the Panasonic Telephone. 
Table of Contents 
Important safety instructions ................. .I 
Connection ............................... . 
Initial setting ............................. .4 
Location of controls ........................ .5 
Using overlay ............................. .7 
Installing the card holder .................... .8 
Wall mounting ............................ .9 
Important information 
....................... 10 
Accessory order information .......... Back...

Initial setting 
I- 
HANDSET VOLUME Selector: 
To adjust the volume level of the handset. 
NORMAL: Normal voice 
HIGH: Loud voice 
RINGER VOLUME Selector: 
To adjust the volume level of the ringer. 
HIGH: Loud ringer 
LOW: Low ringer 
OFF: No ringer 
VOLUME Control: 
To adjust the volume level of the speaker volume. 
MAX: Loud voice 
MIN: Low voice 
MEMORY Switch: 
Set to “SET”. 
For station programming, set to “PROGRAM”. 
HANDSET/HEADSET Selector: 
Set to “HANDSET”. 
For connecting the headset, set to...

Location of controls 
---a 
-@ 
-a 
--a 
2 
10 
-0 
-----a 
----@ 
KX-T7030 is compatible with the Panasonic Electronic Modular 
Switching Systems and can perform most functions within each 
system. 
-5-  

@ INTERCOM Button and 
Indicator: 
Used for making or receiving 
an intercom call. 
@CONFERENCE Button and 
Indicator: 
Used for speaking with three 
parties at the same time. 
@ REDIAL Button: 
Redials the last number 
dialed. 
@ FLASH Button: 
Used for sending the hook 
flash signal to the CO line. 
@ LCD (Liquid Crystal Display) 
@ Programmable Feature Buttons: 
Dials or accesses the system 
feature with one touch. 
@ Flexible CO Line Buttons and 
Indicators*: 
Used for dialing via CO line, 
Direct...

Using overlay 
When you set the system programming data, the function of the KX-T7030 
connected to your EMSS unit will change as follows. 
SECRET 
47- 
+ 
CLEAR 
PAUSE 
STORE/AUTO 
SELECT 
-7-  

Installing the card holder 
1 
Line up the marks (b) on 
the card holder and ones on 
the slide rails of the unit. 
2 
Push the two shaded 
portions slightly and insert 
the edges of the holder 
under the slide rails and 
then slide down toward 
arrow “A”. 
Removing the card holder: 
Push the card holder toward 
arrow “B” while keeping the tip 
of the holder pulled toward arrow 
“C”. 
-8-  

Wall mounting 
This unit can be mounted on the wall phone plate. 
1 
Turn the handset hook 
upside down. 
/ 
4 
Place the stand on the 
center of the unit. 
2 
Remove the attached stand. 
5 
Mount the unit on the wall 
phone plate. 
shows UP for WALL. To temporarily place the handset 
down during a conversation, hook 
as shown. 
f 
-9-