Panasonic Kx T2375 Operating Instructions Manual

Integrated Telephone System
Model No.
KX-T2375MXW
Pulse-or-tone dialing capability
Operating Instructions
PLEASE READ BEFORE USE AND SAVE.
Preparation
Basic Operation
Advanced Operation
Useful Information 

Before Initial Use
2
Thank you for purchasing your new Panasonic
integrated telephone.
Accessories (included)
·Handset. . . . . . . . . . . . . . . one
(p. 6)
·Telephone Line Cord. . . . . one
(p. 6)·Handset Cord. . . . . . . . . . . one
(p. 6)
·Wall Mounting Adaptor. . . . one
(p. 12)
For your future reference
Serial No.Date of purchase
(found on the bottom of the unit)
Name and address of dealer 

3
Preparation
Basic Operation
Advanced Operation
Useful Information
Location of Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Installing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting the Handset/Telephone Line Cord. . . . . . . . . . ....

4
Location of Controls
ABCDEFJKLMNO
GHI
TUV WXYZ PQRSPAUSE
REDIAL
FLASH
HOLDVOLUME
MUTE
PROGRAM
MICSP-PHONE
DIAL LOCK
DIAL LOCK
MUTEPROG.LOWERTIME SET
AUTO/LOWER
(TONE) Button (p. 21)
(FLASH) 
Button (p. 21, 23) VOLUME
 (_) (^) 
Buttons (p. 14)RINGER 
Selector (p. 11)
(PROGRAM) Button (p. 8, 16)
(PAUSE) Button (p. 21)
 (REDIAL) Button (p. 13) Display (p. 5)
One-Touch Auto 
Dial Buttons (p. 18)
(DIAL\LOCK) Button (p. 25)
(AUTO/LOWER) 
Button (p. 16, 19)
(HOLD) Button (p. 14)
MIC (Microphone) 
(p. 13, 15)...

Preparation
5
Display
: In the standby mode, the display shows the current time.
(Ex. 12:00AM)
: During a conversation, the call duration is displayed. 
(Ex. 2 hours, 14 minutes, 30 seconds)
: 
(FLASH)was pressed.
:
(PAUSE)was pressed while storing phone numbers.
:
($)was pressed while dialing.
:
(#)was pressed while dialing.
:
(AUTO/LOWER)was pressed (p. 16, 19).
:
(MUTE)was pressed during a conversation (p. 22).
:The unit plays music during the hold for a caller.
:The unit is in the clock setting...

6
Settings
Connecting the Handset/Telephone Line
Cord
After connection, lift the handset to check for a dial tone.
³Use only a Panasonic Handset for the KX-T2375MXW.
To Single-Line
Telephone JackHandset Cord Handset
Telephone Line 
Cord
LINE LINE
DA DAT
TA
A
1.Press down in the direction of the
arrow and remove the cover.
2.Install the batteries in the proper
order as shown, matching the
correct polarity.
3.Close the battery cover.
³Batteries are not included in the unit.
³Install three high quality “AA”...

7
Preparation
Ò
³Computer 
³Modem
³Fax
³Answering machine To Single-Line
Telephone Jack
LINE LINE
DA DAT
TA
A
Connecting a Communication Device
If you connect a communication device (computer, modem, fax,
answering machine, etc.) to the telephone line, you can connect it through
this unit using the DATA jack.
After connecting the handset and telephone line cord (p. 6), connect the
communication device telephone line cord to the DATA jack.
³Make sure the communication device is not in use before using...

8
ÒSettings
Programming Summary of Preparations
You can program the following functions. The display shows the
programming instructions. See the corresponding pages for function
details.
Make sure that a call is not put on hold.
Press (MUTE).
Press (PROGRAM) to store the setting.
Press (PROGRAM).
³To set the call restriction, press (1). (page 26)
³To change the flash time, press (2). (page 23)
³To select the dialing mode, press (3). (page 9)
³To turn on/off music played during the hold, press (4). (page...

9
Preparation
Ò
Selecting the Dialing Mode
You can select the dialing mode by programming. If you have touch tone
service, set to “Tone”. If rotary or pulse service is used, set to “Pulse”.
Your phone comes from the factory set to “Tone”.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
2
Press (MUTE).
3
Press (3).
³The current setting is displayed.
4
To select “Pulse”, press (2).
OR
To select “Tone”, press 
(1).
5
Press (PROGRAM).
³A long beep sounds.
³The unit will return to the standby mode. 

10
Time Adjustment
You can select AM/PM or 24-hour clock by programming.
Make sure that a call is not put on hold.
1
Press (PROGRAM).
2
Press (MUTE).
3
Press (6).
4
Enter the current time (hour and
minute) using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
5
Press (#)to select AM, PM or 24-hour
clock.
(Ex. You select PM.)
³Each time you press (#), the selection will change on the display.
6
Press (PROGRAM).
³A long beep sounds.
³The clock starts working.
³If an alarm sound is heard when entering...