Panasonic Kx Prwa13 Installation Manual
Have a look at the manual Panasonic Kx Prwa13 Installation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
For assistance, please visit http://www.panasonic.com/help11
Appendix
PRWA13(en)_1120_ver011.pdf 112013/11/20 11:45:06Limited Warranty Limits And ExclusionsThis Limited Warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by the warrantor, or failures which result from accidents,
misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper maintenance,
power line surge, lightning damage, modification, introduction of sand, humidity or liquids,
commercial use such as hotel, office, restaurant, or other business or rental use of the
product, or service by anyone other than a Factory Service Center or other Authorized
Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED
WARRANTY COVERAGE. THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR
ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY. (As examples, this
excludes damages for lost time, lost calls or messages, cost of having someone remove or
re-install an installed unit if applicable, travel to and from the servicer. The items listed are not
exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD
OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from state to state. If a problem with this product develops during or after the
Limited Warranty period, you may contact your dealer or Service Center. If the problem is not
handled to your satisfaction, then write to the warrantors Consumer Affairs Department at the
addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE
YOUR RESPONSIBILITY.
When you ship the product
7Carefully pack your unit, preferably in the original carton.
7Attach a letter, detailing the symptom.
7Send the unit to Panasonic Exchange Center, prepaid and adequately insured.
7Do not send your unit to Panasonic Corporation of North America listed on the back
cover or to executive or regional sales offices. These locations do not repair consumer
products.
© Panasonic System Networks Co., Ltd. 2013
12For assistance, please visit http://www.panasonic.com/help
Appendix
PRWA13(en)_1120_ver011.pdf 122013/11/20 11:45:061 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the base unit’s
Operating Instructions.
IMPORTANT!If your product is not working properly. . .
Visit our Web site: http://www.panasonic.com/help
LFAQ and troubleshooting hints are available. Two Riverfront Plaza, Newark, NJ 07102-5490
13 Product Parts-Top/Inside 1 Roll paper spindle holders 2 Roll paper cover 3 Roll paper feeder 4 Edge guide 5 Paper support
14 6 Rear manual feeder 7 Printer cover 8 Print head 9 Ink cartridges 10 Ink maintenance tank(maintenance box1) Parent topic:Printer PartLocations Product Parts-Rear/Spindle 1 Rear access unit 2 Roll paper holder unitconnector 3 USB port 4 Airflow vents
15 5 Ethernet/LAN port 6 Status lights 7 AC inlet 8 Removable paperstop(black) 9 Removable paperstop(gray) 10 Spindle 11 3-inch coreadapters 12 Borderless printingspacer Parent topic:Printer PartLocations Control PanelParts
16 1 power light 2 power button 3 LCD screen 4 paper feedanduparrow button 5 Black ink/maintenance button 6 paper source andleftarrow button 7 paper feedanddown arrow button 8 Menu andright arrow button 9 paper cutbutton 10 load paper button 11 OK button 12 pause/cancel button 13 pause/cancel light 14 Check inklight 15 Check paperlight LCD Screen Display
17 1 Status messages 2 Paper source The icon indicates thecurrent papersource settings. Thenumber appears whenaCustom Paper setting isselected. : Roll paper withAuto Cutenabled : Roll paper withAuto Cutdisabled : Cut sheet paper 3 Ink cartridge status : Amount ofink remaining inthe cartridge : Ink level islow : Ink cartridge isexpended : Ink error; check thestatus message onthe LCD screen 4 : Installed options:SpectroProofer (shown)isthe only supported option 5 Photo BlackorMatte Blackinkselected Press the Blackink/maintenance buttontoswitch cartridge types 6 Maintenance tankstatus : Amount ofspace remaining inthe maintenance tank : Maintenance tankisnearing theend ofits service life : Maintenance tankisat the end ofits service life 7 Roll paper remaining 8 Roll paper margin setting
18 9 Platen gapsetting : Narrow : Standard : Wide : Wider : Widest Parent topic:Printer PartLocations
19 Media Handling See these sections toload andhandle mediaonyour product. Roll Paper Handling Cut Sheet Handling Creating CustomPaperConfigurations Available EpsonPapers Borderless PaperTypeCompatibility Roll Paper Handling See these sections toload, cut,and remove rollpaper inyour product. Removing theRoll Media Adapter -2-inch Core Installing theRoll Media Adapter -3-inch Core Loading RollPaper onthe Spindle Installing theBorderless Spacer Loading RollPaper Cutting RollPaper Removing RollPaper Parent topic:Media Handling Removing theRoll Media Adapter -2-inch Core For rollcanvas mediawitha2-inch core,youneed toremove therollmedia adapter fromthepaper stop to match thecore sizeofyour rollcanvas media. Note: Thinmedia (lessthan250gsm) isnot supported forthis core size. 1. Remove theblack paper stopfrom thespindle.
20 2. Push outthetwo hooks onthe black paper stopandremove thegray adapter fromthepaper stop. 3. Toremove thegray adapter fromtheother paper stop,slideitoff the spindle. Parent topic:RollPaper Handling Installing theRoll Media Adapter -3-inch Core For rollpaper witha3-inch core,youneed toinstall therollmedia adapter ontothepaper stoptomatch the core sizeofyour rollpaper. 1. Remove theblack paper stopfrom thespindle.