Panasonic KX MB2030 User Manual

7.1 Caller ID service
This unit is compatible with the Caller ID service
offered by your local telephone company. To use this
unit’s Caller ID features, you must subscribe to a
Caller ID service.
Make sure the following ring count is set to 2 or more
rings beforehand.
– FAX ring count (feature #210 on page 57)
R The name display service may not be available in
some areas. For further information, please contact
your telephone company.
7.1.1 How Caller ID is displayed
The calling party’s name or telephone...

2MSet N
R To cancel erasing, press  MStop N, then  MMenu N.
3 MSet N A  M Stop N
7.3.2 Erasing specific caller information
R Make sure that the  MFax N light is ON.
1 MCaller ID N
2 Press  MC N or  MD N repeatedly to display the desired
item.  A M F N A  M Set N A  M Stop N
7.4 Storing caller information
7.4.1 Into the one-touch dial feature and
phonebook
R Make sure that the  MFax N light is ON.
1 MCaller ID N
2 Press  MC N or  MD N repeatedly to display the desired
item.
3 MMenu N
4 Select the station...

8.1 Distinctive Ring service
When a call is made to one of your phone numbers, the
telephone company sends a ring pattern to your
telephone line to indicate which number the call is
intended for. By setting up this unit for Distinctive Ring,
you can make the unit automatically start fax reception
when a call comes to the fax number.
To use this service, you must subscribe to the
Distinctive Ring service offered by your local
telephone company. Consult your local telephone
company for availability.
8.2...

9.1 Programming
1MMenu N
2 Press  MB N and the 3-digit code (page 55 to
page 69).
3 Press the appropriate selection to display the desired
setting.
R This step will vary depending on the feature.
4 MSet N
5 Press  MMenu N to exit.
To select features through the web browser interface
(LAN connection only)
You can change features through the web browser
interface instead of the unit.
1. Start Multi-Function Station.  A [Utilities]  A
[Configuration Web Page]
R You can also access the unit by entering its...

9.2 Basic featuresFeature/CodeSelectionSetting the quick setup
MBNM 1NM 0NM 0N
(KX-MB2030 only)You can print out the quick fax setup guide and select the desired receiving
mode depending on your situation.
M 1 N “ FAX ONLY ” (default): Use only as a fax (page 46).
M 2 N “ DIST. RING ”: With the Distinctive Ring service (page 53).
M 3 N “ EXT. TAM ”: With an external telephone answering machine (page 47).
M 4 N “ EXT. TEL ”: Mostly phone calls (page 47).
1. MMenu N A  M B NM1NM 0NM 0N
2. MSet N
3. Press...

Feature/CodeSelectionSelecting the scale
M B NM1NM 4NM 7NM1 N “ MILLIMETERS ”
M 2 N “ INCHES ” (default)
Note:
R The selected scale will be used when measurements are shown on the
unit’s display.Changing the password for
feature programming via
remote operation
M B NM1NM 5NM 5N1. MMenu N A  M B NM1NM 5NM 5N A  M Set N
2. Enter the current password.  A M Set N
R The default password is  “1234 ”.
3. Enter a new 4-digit password using 0–9.  A M Set N
4. Enter the new password again.  A M Set N A  M Menu N...

Feature/CodeSelectionChanging the ring count in
FAX ONLY mode
MBNM 2NM 1NM 0N
(KX-MB2030 only)M 1 N “ 1 ”
M 2 N “ 2 ”
M 3 N “ 3 ” (default)
M 4 N “ 4 ”
M 5 N “ 5 EXT. TAM ” (External Telephone Answering Machine)
Note:
R If you are using the unit with an answering machine, set to more than 4
(page 47).Setting the Caller ID list to
print automatically
MBNM 2NM 1NM 6N
(KX-MB2030 only)M 0 N “ OFF ” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30...

Feature/CodeSelectionSetting the waiting time for
the power save mode
M B NM4NM 0NM 3NTo set the length of time before the unit enters power save mode.
M 1 N “ 5min ” (default): 5 minutes
M 2 N “ 15min ”: 15 minutes
M 3 N “ 30min ”: 30 minutes
M 4 N “ 1h ”: 1 hour
Note:
R When in power save mode, the unit needs to preheat the fuser unit before
it can begin printing.Holding the previous contrast
setting
M B NM4NM 6NM 2NM0 N “ DISABLED ” (default): Deactivates this feature.
M 1 N “ ENABLED ”: The unit will...

9.3 Fax features (KX-MB2030 only)Feature/CodeSelectionErasing all items stored for
the one-touch dial and
phonebook
M B NM2NM 8NM 9NM0 N “ NO ” (default)
M 1 N “ YES ”
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
To erase all items:
1. MMenu N A  M B NM2NM 8NM 9N
2. Press  M1 N to select  “YES ”.  A  M Set N
3. Press  M1 N to select  “YES ”.  A  M Set N A  M Menu NPrinting a confirmation
report
M B NM4NM 0NM 1NM0 N “ OFF ”: Confirmation reports will not be...

Feature/CodeSelectionSending a fax at a specific
time
M B NM4NM 1NM 2NThis feature allows you to take advantage of low-cost calling hours offered by
your telephone company. This feature can be set up to 24 hours in advance of
the desired time.
M 0 N “ OFF ” (default)
M 1 N “ ON ”
To send a document:
1. If the  MFax N light is OFF, turn it ON by pressing  MFax N.
2. Set the original (page 19).
3. If necessary, change the resolution (page 41) and the contrast (page 41).
4. MMenu N A  M B NM4NM 1NM 2N
5....