Panasonic Kx Dt333, Kx Dt343, Kx Dt346 Information Manual

							Important Information
Document Version 2009-03                                                                                         21
FCC and Other Information
F.C.C. REQUIREMENTS AND RELEVANT INFORMATIONThis equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION:To assure continued compliance with FCC rules, do not make any 
unauthorized changes or modifications to this equipment would void the 
user’s authority to operate this device.
When programming emergency numbers and/or making test calls to 
emergency numbers:
1) Remain on the line and briefly explain to the dispatcher the reason for 
the call before hanging up.
2) Perform such activities in the off peak hours, such as early morning 
hours or late evenings.
FCC Declaration of ConformityTrade Name: Panasonic
Model Number: KX-DT343/KX-DT346
Responsible Party: Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094 U.S.A.
Telephone No.: 1-800-211-PANA (7262)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired 
operation. 
						

							Important Information
22                                                                                                Document Version 2009-03
This unit features a Bluetooth Module slot that can be used to 
wirelessly connect a Bluetooth headset to the unit.
Radio Frequency Exposure Requirements (When an optional 
Bluetooth Module is installed)
This product complies with FCC radiation exposure limits set forth for an 
uncontrolled environment. To comply with FCC RF exposure requirements, 
it must be installed and operated in accordance with provided instructions. 
The unit requires minimum 20 cm (8 in) spacing must be provided between 
antennas and all person’s body (excluding extremities of hands, wrists and 
feet) during wireless modes of operation. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
Customer Information
This equipment complies with Part 68 of the FCC rules and the 
requirements adopted by the ACTA. On the bottom of the cabinet of this 
equipment is a label that contains, among other information, the following 
product identifier:  
US: ACJKXNANKX-DT346
 If requested, this number must be provided to the telephone company.
If trouble is experienced with this equipment KX-DT333, KX-DT343, and  
KX-DT346, for repair or warranty information, please contact:
Panasonic Service and Technology Company-BTS Center
415 Horizon Drive Bldg. 300 Ste. 350-B
Suwanee, GA 30024-3186
If the equipment is causing harm to the telephone network, the telephone 
company may request that you disconnect the equipment until the problem 
is resolved.
Hearing Aid Compatibility:This telephone provides magnetic coupling for hearing aids.
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo have 
reduced noise and interference when used with T-Coil 
equipped hearing aids and cochlear implants.
T
Compatible with
Hearing Aid T-Coil
TIA-1083 
						

							Document Version 2009-03                                                                                            23
wall
WALL MOUNTING TEMPLATE
1. Drive the screws into the wall 
    as indicated.
2. Hook the unit onto the screw 
    heads.
     Note:
    Make sure to set the print size to 
    correspond with the size of this 
    page. If the dimensions of the 
    paper output still deviate slightly 
    from the measurements indicated 
    here, use the measurements
    indicated here.
100 mm (3-15/16 in)  83 mm (3-1/4 in)  for base unit
One screw at either point One screw here 
						

							PSQX4683ZA-UU (A) KK0309YH0 (M)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com/csd
Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and 
may be reproduced for internal use only. 
All other reproduction, in whole or in 
part, is prohibited without the written  consent of Panasonic Communications 
Co., Ltd.
© Panasonic Communications Co., Ltd. 2009