Panasonic Interchangeable Lens For Digital Camera H-x015 Owners Manual

Owner’s Manual
INTERCHANGEABLE LENS FOR DIGITAL CAMERA
Model No.
H-X015
PP
until 
2014/4/28
Please read these instructions carefully before using this product, and save this manual for future use.If you have any questions, visit: 
USA : www.panasonic.com/support
Canada : www.panasonic.ca/english/support
SQT0243F0414KD0
SQT0243_ENG_SPA.book  1 ページ  ２０１４年４月１１日　金曜日　午前９時３３分 

2SQT0243 (ENG)ContentsInformation for Your Safety ..................................... 2Precautions ........................................................... 4
Supplied Accessories ............................................. 5
Names and Functions of Components ................... 6
Attaching/Detaching the Lens ................................. 7
Cautions for Use ................................................... 10 Troubleshooting .................................................. 10...

3
(ENG) SQT0243
≥The digital camera illustrations in this owner’s 
manual show DMC-GM1 as an example.
≥ The appearance and specifications of products 
described in this manual may differ from the actual 
products you have purchased due to later 
enhancements.
≥ Micro Four Thirds
TM and Micro Four Thirds Logo 
marks are trademarks or registered trademarks of 
Olympus Imaging Corporation, in Japan, the 
United States, the European Union and other 
countries.
≥ Four Thirds
TM and Four Thirds Logo marks are...

4SQT0243 (ENG)∫Lens Care≥Sand and dust can damage the lens. Make 
sure that no sand or dust gets inside the lens 
or the terminals when using the lens on a 
beach, etc.
≥ The lens is neither waterproof nor splash-
proof. If drops of water get onto the lens, wipe 
the lens with a dry cloth.
≥ Do not press the lens with excessive force.
≥ When there is dirt (water, oil, and fingerprints, etc.) 
on the surface of the lens, the picture may be 
affected. Lightly wipe the surface of the lens with a 
soft, dry...

5
(ENG) SQT0243
Supplied Accessories[Inspection to be performed when you unpack 
the unit]
When removing the unit from its packing box, check 
that the main unit and the supplied accessories are 
there and also check their external appearance and 
functions to verify that they have not sustained any 
damage during distribution and transportation.
If you discover any trouble, contact your vendor 
before using the product.
Product numbers correct as of April 2014. These 
may be subject to change.≥
The lens...

6SQT0243 (ENG)Names and Functions of Components1Lens surface
2 Decoration ringRemove this cover when using the lens hood.3Aperture ringRotate this to adjust the aperture value.
≥If you set the camera to Aperture-Priority AE 
Mode or Manual Exposure Mode, the aperture 
value of the ring will be enabled.
≥ If you set the position of the aperture ring to [A], 
the aperture value of the camera will be enabled.
≥ When the aperture ring is enabled, check if the 
aperture value has changed after attaching or...

7
(ENG) SQT0243
Attaching/Detaching the LensCheck that the camera is 
turned off.
≥Remove the lens rear cap 
from the lens.∫ Attaching the LensAlign the lens fitting 
marks
 A on the 
camera body and the 
lens and then rotate 
the lens in the 
direction of the 
arrow until it clicks.
• Do not press the lens release button  B when 
you attach a lens.
• Do not try to attach the lens when holding it at an  angle to the camera body as the lens mount may 
get scratched.
• Check that the lens is attached...

8SQT0243 (ENG)∫Attaching the Lens Hood 
(Supplied Accessory)≥Before attaching the lens 
hood, make sure to remove 
the lens cap. The lens hood 
cannot be attached unless 
you remove the lens cap.1 Rotate the decoration ring 
C in the 
direction of the arrow to remove it.
2 Align the mounting index 
D on the lens 
hood with the mark on the tip of the lens.
3 Rotate the lens hood in the direction of  the arrow until it clicks into place, and 
align the stop position 
E on the lens 
hood with the index on...

9
(ENG) SQT0243
∫Attaching the decoration ring≥Before attaching the decoration ring, make 
sure to remove the lens cap.1 Align the mounting position
 G
 on the 
decoration ring with a position 
approximately 90 x away from the lens 
fitting mark 
F 
to fit the decoration ring 
into place.
2 Rotate the decoration ring in the  direction of the arrow to align the 
mounting position 
G on the decoration 
ring with the lens fitting mark 
F. ∫
Attaching Filters
≥Vignetting may occur if using 2 or more 
MC...

10SQT0243 (ENG)Cautions for UseTake care not to drop or knock the lens. Also 
take care not to put a lot of pressure on the lens.
≥Take care not to drop the bag that you inserted the 
lens in as it may strongly shock the lens. The camera 
may stop operating normally and pictures may no 
longer be recorded. Also, the lens may be damaged.≥When carrying the digital camera with the lens 
attached, hold both the digital camera and the lens.When using pesticides and other volatile 
substances around the camera...