Panasonic Integrated Telephone System Kx Ts6 Operating Instructions

							
One-Touch Auto  Dial
Buttons ((DIRECT)and 
(EMERGENCY))
(4-A, 4-B)
RINGER Selector 
(on the bottom of
the unit) (1-B)DIALING MODE 
Selector (on the 
bottom of the
unit (1-B) HANDSET
VOLUME Selector
(on the bottom 
of the unit) 
(1-B)
(PAUSE)Button 
(3-A, 4-A, 5-C)
(FLASH)Button (5-A)
(REDIAL)Button (2-A) (TONE)Button (5-B)
For your future referenceSerial No.(found on the bottom of the unit)Date of purchase
Name and address of dealer
Panasonic Consumer Electronics
Company,
Division of Matsushita Electric
Corporation of America
One Panasonic Way, Secaucus, New Jersey
07094
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico, Inc.
Ave. 65 de Infantería, Km. 9.5, San Gabriel
Industrial Park Carolina, Puerto Rico 00985Printed in USA
PQQX13390ZA
AG0302AS0
Integrated Telephone System
Model No.    
KX-TS6W
Pulse-or-tone dialing capability
Operating Instructions
PLEASE READ BEFORE USE AND SAVE.
Connect the handset cord.
Connect the telephone line cord, then lift the
handset to confirm the dial tone.
1-A Location of ControlsAccessories (included)
Handset....................................one
Handset Cord...........................one
Telephone Line Cord................one
1-B Settings1
2
Set the DIALING MODE selector to TONE.• If you cannot dial, set to PULSE. Set the RINGER selector to HIGH, LOW or OFF.
(Ex: “LOW” is selected.)• When set to OFF, the unit will not ring.Set the HANDSET VOLUME selector to HIGH, 
MEDIUM or LOW.
(Ex: “MEDIUM” is selected.)
2    Operation2-A Making Calls1
Lift the handset.
Dial a phone number.• If you misdial, hang up and start again from 
step 1.
2
When finished talking, hang up.
32-B Answering Calls1
When the unit rings, lift the handset
.
When finished talking, hang up.
2 1
2
Lift the handset.
Press  (REDIAL).
• (REDIAL)will dial the last number you called 
manually.• To order accessories, call 1-800-332-5368.
Panasonic World Wide Web address:
http://www.panasonic.com
for customers in the USA or Puerto Rico(AUTO)Button (3-B)
(PROGRAM)Button 
(3-A, 4-A)
Single-Line
Telephone Jack (RJ11C)
Telephone Line Cord 
HANDSET
VOLUME
Selector 
Handset DIALING 
MODE
Selector
RINGER
Selector
Handset Cord
1    Getting Started
3
4
5
To redial the last number dialed
Attach your purchase receipt here.
Speed Dial Card
Remove the speed dial card and use it as a
name or phone number index for stored
numbers.
3-A Storing Phone Numbers in MemoryYou can store up to 10 phone numbers in the
memory stations.
The dialing buttons ((0)to (9)) function as
memory stations.
To prevent misdialing, store correct information in
memory location before using speed dial
Lift the handset.
Press (PROGRAM).
Enter a phone number up to 16 digits.
• If you misdial, hang up and start again from 
step 1.Press (PROGRAM).
Press a memory station number ((0)to (9)).
When finished, hang up.• To store other number, repeat steps 1 to 6.
• If a pause is required for dialing, press (PAUSE)
where needed.
Pressing (PAUSE)counts as one digit (5-C).1
2
3
6 54
Phone number (up to 16 digits)
Station number ((0)to (9)).  
Hang up.
3-B Dialing a Stored Number 
Lift the handset.
Press (AUTO).
Press a memory station number ((0)to (9)).• The stored number is dialed. 
•The (REDIAL)button does not work for Speed Dialer.
To dial the number again, hang up and repeat steps
1 to 3.
•  If the telephone line cord is disconnected more
than 3 days, the stored numbers may be erased.
Store phone numbers again.
1
2
3
3Speed Dialer
Lift the handset
During a conversation, Press (PROGRAM)
twice
Cover
Speed
Dial Card
To store a dialed number in memory(During a conversation)
If you need assistance with the set-up
or operation, please call
1-800-211-PANA(7262)
To erase a stored number
Lift the handset       press (PROGRAM)
(PAUSE) (PROGRAM)
Station number ((0)to (9)).
Hang up.
For assistance, please call: 1-800-211-PANA(7262)
For assistance, please call: 1-800-211-PANA(7262)
1-C Wall MountingThe unit can be mounted on a wall phone plate.1Connect the telephone line cord to the unit.2Connect the telephone line cord to Single-Line
Telephone Jack. Mount the unit, then slide
down.
To temporarily set the
handset down during
a conversation, place
it as shown here.
Wall Phone
Plate
TS6Wfront PQQX13390ZA  4/4/02  1:52 PM  Page 1 
						

							Conecte el cordón de línea teléfonica, luego
levante el auricular para confirmar que tiene
tono para marcar.
Coloque el selector del modo de discado
(DIALING MODE) a TONE (tono).
• Si usted no puede marcar colóquelo en
PULSE (pulso).
Cuando la unidad timbra, levante el auricular.
Cuando termine de hablar, cuelgue.
You can store a number in each auto dial button
((DIRECT)or (EMERGENCY)). Do not press any
one-touch auto dial buttons before storing to
prevent misoperation.
It is recommended that you program an
emergency number in the (EMERGENCY)button.
Lift the handset.
Press (PROGRAM).
Enter a phone number up to 16 digits.• If you misdial, hang up and start again from 
step 1.Press (PROGRAM).
Press a one-touch auto dial button
((DIRECT)or (EMERGENCY)).
1 
2
3
5 4
4-B Dialing a Stored Number Lift the handset.
Press the one-touch auto dial button
((DIRECT)or (EMERGENCY)).• The stored number is dialed.
• The (REDIAL)button does not work for one-touch 
dialer. To dial the number again, hang up and 
repeat steps 1 to 2.
•  If the telephone line cord is disconnected more
than 3 days, the stored numbers may be erased.
Store phone numbers again.
1
2
one-touch auto dial button ((DIRECT)
or (EMERGENCY)).
5    Special Features 
Ala toma de teléfono de una sola línea
Cordón de línea telefónica
Auricular
Cordón del auricular Selector del
timbre (RINGER) Selector del
modo de
discado
(DIALING
MODE)Selector del
volumen en el
auricular
(HANDSET
VOLUME)
Coloque el selector del timbre (RINGER) a 
HIGH (alto), LOW (bajo) u OFF (apagado).• Cuando esté colocado en OFF, la unidad no 
sonará.Coloque el selector de volumen del auricular
en HIGH (alto), MEDIUM (medio) o LOW
(bajo).
1
2
35 47-A Pasos Iniciales 
7-B   Realizando Llamadas 
Levante el auricular.
Marque el número telefónico.• Si usted se equivoca al marcar, cuelgue e inicie
a partir del paso 1.Cuando termine de hablar, cuelgue.
Para remarcar el último número
Levante el auricular      Presione (REDIAL).
• (REDIAL)marcará el último número al que usted llamó
manualmente y no así un número del marcado rápido
o un número del marcado de un solo toque.1
2
37-C   Contestando Llamadas 1
2
4-A Storing Phone Numbers in Memory
Phone number (up to 16 digits) 
Hang up.
Lift the handsetDuring a conversation, press (PROGRAM)twice   
Conecte el cordón del auricular. To store a dialed number in memory
(During a conversation)
6    Things You Should Know6-A Troubleshooting
Problem Remedy
The unit does
not work.• Check the settings (1-B).The call cannot
be connected
even when you
dialed correctly.• Check whether the
DIALING MODE  selector is
set correctly (1-B).The unit does
not ring.• The RINGER selector is set
to OFF. Set to HIGH or
LOW (1-B).• If there is any trouble _
disconnect the unit from
the telephone line and connect a known working
phone.
If the known working phone does not operate 
properly, consult your telephone company.
For product service
• Call 1-800-211-PANA(7262) or 1-800-833-9626 for
the location of an authorized servicenter.
• Panasonic’s e-mail address for customer inquiries:
[email protected] for customers
in the USA or Puerto Rico ONLY.
When you ship the product 
• Carefully pack your unit, preferably in the original
carton.
• Attach a letter, detailing the symptom, to the
outside of the carton.
Symptom
• Send the unit to an authorized servicenter,
prepaid and adequately insured.
• Do not send your unit to the Panasonic Consumer 
Electronics Company listed on the back cover or
to executive or regional sales offices.
These locations do not repair consumer products.
6-B Helpful Information
You cannot store
a phone number
in memory.• Confirm the handset is off
the cradle.
• Do not enter a phone
number longer than 16
digits, otherwise only the
first 16 digits will be
recorded and the previous
registered number will be
erased.
You cannot redial
by pressing
(REDIAL).• If the last number dialed
was longer than 32 digits,
the number will not be
redialed.
5-C How to Use the PAUSE
Button 
(For Analog PBX
Line/Long Distance Service
Users)
5-AFor Call Waiting Service Users5-B Temporary Tone Dialing
(For Rotaty or Pulse Service
Users)
We recommend that you press (PAUSE)if a
pause is required for dialing with a PBX or to
access a long distance service.
Ex. Line access number (9)(PBX)
(9) (PAUSE)Phone number• Pressing (PAUSE)once creates a few seconds
pause.
This prevents misdialing when you redial or dial a
stored number.
• Pressing (PAUSE)more than once increases the
length of the pause between numbers.
Press (FLASH)if you hear a call-waiting tone
while talking.•The first call is put on hold and you can answer the
second call.
• To return to the first caller, press (FLASH)again.Press (TONE)before entering access numbers
which require tone dialing.• After a few seconds, the dialing mode changes
to tone. 
You can enter numbers to access answering
services, electronic banking services, etc.
When you hang up, the dialing mode will return to
pulse.
4One-Touch Dialer
7    Referencia Rápida
To erase a stored number
Lift the handset       press (PROGRAM)
(PAUSE) (PROGRAM)
one-touch auto dial buttons ((DIRECT)
or (EMERGENCY)).
Hang up.
When finished, hang up.• To store other number repeat step 1 to 6.
• If a pause is required for dialing, press (PAUSE)
where needed.
Pressing (PAUSE)counts as one digit (5-C).
6If you cannot 
solve your 
problem• Call our customer call center 
at 1-800-211-PANA(7262).
• Panasonic’s e-mail address
for customer inquiries:
[email protected] customer in the USA or
Puerto Rico ONLYRemedy
Problem
• Environment _
do not place the unit in room
where the temperature is less than 5
oC (41
oF) or
greater than 40
oC (104
oF). Allow 10 cm (4)
clearance around the unit for proper ventilation.
Avoid excessive smoke, dust, mechanical
vibration, shock or direct sunlight.
• Routine care _
wipe the unit with a soft cloth. 
Do not use benzine, thinner, or any abrasive
powder.
For assistance, please call: 1-800-211-PANA(7262)
For assistance, please call: 1-800-211-PANA(7262)
TS6WbackPQQX13390ZA  4/4/02  1:56 PM  Page 1