Panasonic Hx Wa30 Owners Manual

- 211 -
Camera shake warning (l49)
//////////*1///
Scene Mode ( l97)
*1  only
*
2///*2/*2///////
Creative control ( l83)
*2  /   only
ISO64/ISO100/ISO200/ISO400/ISO800/ISO1600/ISO3200*
3
ISO sensitivity ( l106 )
*3  only
////////
Intelligent Auto Mode ( l53)
// Exposure (
l11 7 )
F2.8 Iris value (l48,11 7 )
1/30 Shutter Speed (l48, 11 7)
 / 
/ Zoom/Double range zoom (
l75)
B
// Eye-Fi settings (l155)
 (Gray)
 (Red) Audio recording icon
Recording audio
Focus mark (l
108)
Spot metering target ( l109)...

- 212 -
∫
Wi-Fi connection display
C
// / // Recording Mode (
l94)
// Slow Motion Mode (
l80)
 (White)
 (Red) Motion picture recording icon
Recording motion picture
μ  (Red) Recording motion picture (l 45)
Recording audio ( l52)
000:00:15 Recording time elapsed ( l45, 52)
Approximate remaining recordable time 
( l 45, 52 )
AF Lock ( l11 3 )
AE Lock ( l11 4 )
Ø 10/ Ø2 Self-timer Recording (l 103)
Card recording possible status
Built-in memory recording possible status
// Image Stabilizer (
l78)
/MF/ Focus...

- 213 -
∫
Playback indications
∫ Confirmatory indications
1/; /5 /6 /D /E Display during playback ( l57,  121)
// / / /
Recording Mode ( l94)

Slow Motion Mode ( l80)
00:00:30 Playback Time
NOV 15 2013 3:30PM Recording date and time
NOV 15 2013 Recording date
100-0001 Folder number/file number
Motion picture file
Audio file
Files for which protect is set ( l143)
Face detection ( l109 )
/ Panorama still picture (l 89)
////
/// Creative control (l
130)
/ Eye-Fi transfer status ( l157 )
/ Files exceeding...

- 214 -
Major confirmation/error messages to be indicated on the screen in text.
Others
Messages
CHECK CARD.
This card is not compatible or it cannot be recognized by the unit.
If this indication appears despite motion pictures, still pictures and 
audio being recorded on the SD card, the SD card may be in an 
unstable state. Re-insert the SD card and turn the unit off and on 
again.
CARD FULL.
Built-in Memory full.
There is no space on the SD card or in built-in memory. Please delete 
unneeded files or...

- 215 -
∫It is not a malfunction in following cases
Others
Troubleshooting
Object seems to be 
warped. ≥
Object seems to be warped slightly when the 
object moves across the image very fast, but 
this is because the unit is using MOS for the 
image sensor. This is not a malfunction.
White round spots 
like soap bubbles 
appear on the 
recorded picture. ≥
If you take a 
picture with the 
flash in a dark 
place or indoors, 
white round spots 
may appear on 
the picture caused by the flash reflecting of...

- 216 -
The zoom button, 
rear door, etc. 
cannot be moved≥
If the unit is used in a cold place such as a ski 
slope or high-altitude location and left it with 
snow or water droplets adhering to it, the 
frozen snow or water droplets may fill the 
gaps around the zoom button and power 
button, causing unstable operation. This is 
not a malfunction. The operation will return to 
normal when the unit regains its normal 
temperature.
Power
ProblemCheck points
This unit cannot be 
turned on.
This unit does...

- 217 -
This unit is turned 
off automatically.≥
If the unit has not been operated for 
approximately 5 minutes (settings at the 
time of purchase) when the power is turned 
on, the ECONOMY function will activate and 
switch to Standby Mode to limit power 
consumption in situations such as the user 
forgetting to turn the power off. When the 
unit is in Standby Mode, press the power 
button.
≥ If the unit turns off when you turn off the 
power to the TV using the TV remote 
control, the VIERA Link is at...

- 218 -
“ERROR 
OCCURRED. 
PLEASE TURN 
UNIT OFF, THEN 
TURN ON AGAIN.” 
is displayed.≥
Check each of the following items.
j Remove the SD card from the device and 
reinsert.
j Remove the battery and then put it in 
again.
j Change the SD card and check.
≥ If a message is still displayed after checking 
the above, detach the power connected, 
and consult the dealer who you purchased 
this unit from.
Indication
ProblemCheck points
The battery 
capacity indication 
or the elapsed time 
indication is not...

- 219 -
Recording
ProblemCheck points
The high 
temperature 
warning icon   
is displayed and 
recording is not 
possible. ≥
The battery temperature or unit internal 
temperature (excluding battery) rises. Wait 
for the temperature to drop before using the 
unit again.
When recording 
still pictures, the 
angle of view of 
the image 
displayed on the 
LCD monitor 
changes. ≥
The field of view of the image displayed on 
the LCD monitor differs for motion picture 
recording and still picture recording. At...

- 220 -
Color balance of 
images is strange 
when recording in 
a place such as a 
gymnasium.≥
In a place with multiple light sources, such 
as a gymnasium or a hall, set the White 
Balance setting to   (INDOOR 2). If you 
cannot record clearly with the   
(INDOOR 2), set it to   (WHITE SET). 
(l 115 )
Color or 
brightness of the 
image changes, or 
you may see 
horizontal bars in 
the image.
The LCD monitor 
flickers indoors. ≥
Color or brightness of the image may 
change, or you may see horizontal bars...