Panasonic Hx Wa30 Basic Owners Manual

							 VQT4X05 31
If the screen to set the date and time appears when you turn on the unit, 
skip to step 2 and follow the steps to set the date and time.
1Select the menu. (l38)
2Select an item ([DATE]/[TIME]/[DISP]) using the SET 
button and then tilt the SET button to the right or 
press the SET button.
3(When [DATE] or [TIME] is selected)
Tilt the SET button to the left or right to select the 
desired item and then up and down to set the 
numerical values.
e.g.: When [DATE] is selected
≥The year can be set between 2000 and 2039.
Preparation
Setting date and time
[MENU]:   # [CLOCK SET]1
HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  31 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							32 VQT4X05
(When [DISP] is selected)
Select the date format display method using the SET 
button.
4Press the SET button.
5Select [SAVE DATE AND TIME] using the SET button 
and then press the SET button.
6(At the time of purchase only)
After setting [CLOCK SET], notes for underwater use 
are displayed. Check them to maintain the waterproof 
performance.
≥After the notes are displayed, the recording mode setting screen is 
automatically displayed. To move to the next display, press the SET 
button.
≥  / 
After the notes are displayed, the recording standby screen is 
automatically displayed. To exit the display, press the MENU button.
7
(At the time of purchase only)
Select the desired recording mode using the SET 
button and then press the SET button.
8
(At the time of purchase only)
Configure the Wi-Fi settings.
HX-WA30
HX-WA3HX-WA03
HX-WA30
HX-WA30
HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  32 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							 VQT4X05 33
≥Motion pictures are recorded to the SD card if one is inserted. If no SD 
card is inserted, the motion pictures are recorded to the built-in memory.
1Open the LCD monitor.
2Press the REC/  button to change to recording 
mode.
3Press the recording start/stop button to start 
recording.
AWhen you begin recording,  ¥ appears.
4Press the recording start/stop button again to pause 
recording.
Basic
Recording motion pictures
000:00:00000:00:00000:00:00

HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  33 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							34 VQT4X05
≥Still pictures are recorded to SD card if one is inserted. If no SD card is 
inserted, the still pictures are recorded to the built-in memory.
1Open the LCD monitor.
2Press the REC/  button to change to recording 
mode.
3(For Auto Focus only) 
Press the   button halfway.
A Focus area (area inside brackets)
4Press the   button fully.
≥If you continue to hold down the   button, you can check the 
recorded image on the LCD monitor.
Basic
Recording still pictures
F2.8F2.8F2.8
1/301/301/30

HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  34 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							 VQT4X05 35
≥Audio is recorded to the SD card if one is inserted. If no SD card is 
inserted, the audio is recorded to the built-in memory.
1Open the LCD monitor.
2Press the REC/  button to change to recording 
mode.
3Select the menu. ( l38)
4Start recording by pressing the recording start/stop 
button.
5Press the recording start/stop button again to stop 
recording.
The modes (appropriate for the condition) are set just by pointing the unit 
to what you want to record.
Basic
Recording audio
[MENU]:   # [REC MODE]  # [ (VOICE RECORD)]
Basic
Intelligent Auto Mode
1
Press the   button to 
switch to Intelligent Auto 
Mode.
HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  35 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							36 VQT4X05
1Press the REC/  button to change to Playback 
Mode.
2Select the file to play back using the SET button and 
press the SET button.
AThe information for the file in the yellow frame is displayed.
≥ Tilt and hold the SET button up or down to display the next (or 
previous) page.
Basic
Motion picture/Still picture/Audio 
playback
Thumbnail display

HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  36 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							 VQT4X05 37
3Play back using the SET button.
BOperation icon*
* If the operation icon disappears, perform a SET button operation to  display it.
≥ Tilt the SET button up to start/pause playback of motion pictures.
Watching Video/Pictures on your TV
Connect the unit to a TV using the AV cable (supplied) or 
a HDMI micro cable (optional).
≥Connecting the AV cable in the wrong direction may cause damage to 
the USB/AV terminal of the unit. If the terminal has become damaged, 
it may not operate correctly, including failure to recognize the cable 
even if it has been connected.


A USB/AV connector
B HDMI micro connector
HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  37 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							38 VQT4X05
1Press the MENU button. 
2Tilt the SET button to the left. 
3Select tab A using the SET button, and tilt the SET 
button to the right or press the SET button.
4Select from menu items B using the SET button, and 
tilt the SET button to the right, or press the SET 
button.
Basic
Using the menu screen
MENU
MENU


HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  38 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							 VQT4X05 39
5Select the setting content using the SET button and 
press the SET button to set.
∫ About applicable mode indicator
In the recording menu, the Recording Mode that reflects the currently 
displayed setting is displayed.
C Applicable mode indicator
: Setting is applied to still picture and motion picture recording.
:  Setting is applied to still picture recording.
:  Setting is applied to motion picture recording.
To get back to the previous screenPress the MENU button.
To end the menu settingPress the MENU button several times.

HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  39 ページ  ２０１３年１月１６日　水曜日　午後５時２９分 
						

							40 VQT4X05
Language selection
You can select the language on the screen display and the menu screen.
Formatting
Please be aware that if a medium is formatted, then all the data recorded 
on the medium will be erased and cannot be restored. Back up important 
data on a PC, disc, etc.[MENU]:  
# [LANGUAGE]
[MENU]:   # [FORMAT]
2
2
HX-WA30&WA3&WA03_PP&PU-VQT4X05_mst.book  40 ページ  ２０１３年１月１６日　水曜日　午後５時２９分