Panasonic Hx Dc3 Owners Manual

- 101 -
≥Set to Playback Mode. ( l22)
1Select the menu.
2Using the SET button, select [DELETE SELECTED], 
[DELETE ALL] or [DELETE FOLDER] and press the 
SET button.
∫ Deleting selected files
3(When [DELETE SELECTED] is selected in Step 2)
Select the file to delete using the SET button and 
press the SET button.
≥  will appear on the selected file. To cancel, press the SET button 
again.
≥ You can continue selecting up to maximum of 100 files.
4Press the   button or the recording start/stop 
button.
≥A...

- 102 -
∫
Deleting all files
3 (When [DELETE ALL] is selected in Step 2)
Select [DELETE] using the SET button and press the 
SET button.
≥A delete confirmation screen appears.
4Select [YES] using the SET button and press the SET 
button.
≥All the files will be deleted.
∫ Deleting a folder
3 (When [DELETE FOLDER] is selected in Step 2)
Select the folder to delete using the SET button and 
press the SET button.
≥A delete confirmation screen appears.
4Select [YES] using the SET button and press the SET...

- 103 -
Protecting a file
Files can be protected so that they are not deleted by mistake. (Even if 
you protect some files, formatting the media will delete them.)
≥ Set to Playback Mode. ( l22)
1Select the menu.
* When you are using an Eye-Fi card which has already been set to 
selective forwarding with a PC, [TRANSFER/PROTECT] is displayed.
2Select the file you wish to protect using the SET 
button and press the SET button.
≥  appears. To cancel the selection, press the SET button again.
3Press the...

- 104 -
≥Always use the supplied AV cable.
≥ HDMI is the interface for digital devices. If you connect this unit to a 
HDMI compatible high definition TV and then play back the recorded 
high-definition images, you can enjoy them in high resolution with high 
quality sound.
≥ Turn down the volume before connecting.
1Connect this unit to a TV.
Advanced (Playback)
Watching Video/Pictures on your 
TV
Confirm the terminals on your TV and use a cable compatible 
with the terminals. Image quality may vary with...

- 105 -
≥Check that the plugs are inserted as far as they go.
≥ Connecting the AV cable in the wrong direction may cause damage to 
the USB/AV connector of the unit. If the terminal has become 
damaged, it may not operate correctly, including failure to recognize 
the cable even if it has been connected.
≥ Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, 
RP-CDHM30: optional).
≥ Do not use any other AV cables except the supplied one.
2Select the video input on the TV.
≥Example:
Select the...

- 106 -
3Play back from the unit.
≥The volume cannot be adjusted on the unit. Please adjust the volume 
on the TV.
≥ Setting the [TV SYSTEM] to [NTSC] will not display the screen of the 
unit during recording standby. ( l108) Please check on the TV screen 
instead.
≥ About the video output
The video output destination varies depending on the status of 
the unit.
≤: Output
—: No output Connection 
cable Video output 
destination
TV 
SYSTEM  (
l108)
Recording ModePlayback  Mode
StandbyRecording
AV cable...

- 107 -
∫
To watch images on a regular TV (4:3) or when both 
sides of the images do not appear on the screen
Change the menu setting to display the images correctly. (Check the TV 
setting.)
Example of images with a [16:9] aspect ratio on a regular TV (4:3)
≥If a wide-screen TV is connected, adjust the aspect setting on the TV. 
(Refer to the operating instructions of the TV for details.)
[MENU]:  
# [TV OUTPUT]  # [TV ASPECT] #  [4:3]
[TV ASPECT] setting
[16:9][4:3]
Refer to the following support site...

- 108 -
Connecting with an HDMI mini cable
Select the desired method of HDMI output.
≥[AUTO] determines the output resolution automatically based on 
information from the connected TV.
If the images are not output on the TV when the setting is [AUTO], 
switch to the method [720p], [1080i] or [480p] which enables the 
images to be displayed on your TV. (Please read the operating 
instructions for the TV.)
TV format setting
Set the format of the video signal output from the USB/AV connector.[MENU]:  
# [TV...

- 109 -
≥Set to Playback Mode. ( l22)
1Select the menu.
≥If you are not using VIERA Link, set to [OFF].
2Connect this unit to a Panasonic TV compatible with 
VIERA Link using an HDMI mini cable. ( l104)
≥It is recommended to connect this unit to an HDMI terminal other than 
the HDMI1 if there are 2 or more HDMI input terminals on the TV.
≥ VIERA Link must be activated on the connected TV. (Read the 
operating instructions of the TV for how to set etc.)
≥ Always use a genuine Panasonic HDMI mini cable...

- 110 -
3Operate with the remote control for the TV.
∫ Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also 
turns off.
Automatic input switching:
If you connect with an HDMI mini cable and then turn on this unit, the 
input channel on the TV automatically switches to this unit’s screen. If the 
TV’s power is in standby status, it will turn on automatically (if [Set] has 
been selected for the TV’s [Power on link] setting)....