Panasonic Hx A100 Owners Manual

- 31 -
“LUMIX CLUB” settings
If you intend to broadcast a live motion picture or use WEB services with an iOS device, you are 
required to register “LUMIX CLUB” and WEB services you use because uploading or live 
broadcasting is done via “LUMIX CLUB”.
Perform service user registration (free of charge) for the “LUMIX CLUB”, acquire a login ID, and set 
the registered content on this unit.
1When this unit and a smartphone are connected directly (l17), turn 
off the Wi-Fi setting of the smartphone to make...

- 32 -
4Close (or hide) the Image App, turn on the Wi-Fi setting, and connect 
this unit and smartphone (l17)
When you perform a live broadcast with USTREAM, you are required to synchronize the “LUMIX 
CLUB” settings with this unit.
Ta p    # [Playback settings]  # [LUMIX CLUB settings]  # [Manage 
login ID] and tap [Register the same LUMIX CLUB login ID as the 
camera].
Picture Share settings
To upload on a WEB service from the Image App, you are required to make the Picture Share 
settings.
Picture...

- 33 -
Uploads motion/still pictures stored on this unit to WEB services.
“LUMIX CLUB” settings, etc. are required for uploading. (l31) Refer to “Required settings 
for sending data, etc.” ( l30).
≥ For more information, refer to the help of the Image App.
1Ta p  .≥Thumbnails of motion picture or still picture stored in this unit are displayed. ( l27)
2Tap and hold the thumbnail of the motion picture or still picture you 
intend to upload.
≥Tabs are displayed on four sides.
3Drag and drop the thumbnail...

- 34 -
≥If 3G or other mobile connections are used for uploading motion pictures or still pictures, high 
data charges may be incurred depending on the content of your data plan. 
Uploading on WEB services can also be done with an access point connection. ( l41) 

- 35 -
Adv anc ed
This is the connection method for Live broadcasting using the “LUMIX CLUB” and “USTREAM” 
services.
≥Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or 
IEEE802.11n.
≥ Access point settings are required specially for Live broadcasting.
* Only the smartphone compatible with tethering is available.
Connecting this unit with an access point (such as a 
wireless router)
Please read the manual of your access point and  check if the access point is compatible...

- 36 -
Enter SSID (Wireless network name) and password of your access point to connect this unit to the 
access point.
1Check the SSID and password of your access point.≥The SSID and password of the access point (e.g. a wireless router) you use are described on the 
access point device or in its manual. For details, refer to the access point manual.
2Ta p    # [Camera Wi-Fi settings]  # [Live mode settings] # [Set 
connect. dest.] on the Image App screen and enter the SSID and 
password of your access...

- 37 -
Using the “LUMIX CLUB” and “USTREAM” services, you can broadcast live motion pictures. (Live 
broadcasting)
≥For the connection, refer to “Setting the connection destination for Live broadcasting (Connecting 
in Live broadcast mode)” ( l35).
* Only the smartphone compatible with tethering is available.
Setting for Live broadcasting
Make the settings for performing a live broadcast on this unit.
For “LUMIX CLUB” settings, etc., refer to “Required settings for sending data, etc.” ( l30).
1Using the...

- 38 -
Set the line quality, etc. for when in Live broadcast mode. (Direct connection to the smartphone is 
required for the settings. (l17))
From the Image App, tap    # [Camera Wi-Fi settings] #  [Live mode settings], and make 
the settings.
≥ Depending on the e-mail rejection or firewall setting at the destination address, e-mails may not 
be delivered.
Settings on this unit
ItemsContents
Set connect. dest. Up to three SSIDs can be registered for live broadcasting. Each of them 
will make a connection...

- 39 -
∫
About Line quality for Live broadcasting
Set the Line Quality from the following.
When [AUTO] is set, the line quality is checked and is automatically set to one of the options.
(When broadcasting motion pictures or sound are interrupted or the line is disconnected, set the line 
quality according to your communication environment.)
*1 Recommended optimal speed (upstream) for the broadband line, mobile router (tethering), etc. 
connected to this unit (For information on the optimal speed,...

- 40 -
Performing a live broadcast
Press the Wi-Fi/WPS button continuously to change 
the Wi-Fi mode lamp to [ ].
≥Wi-Fi mode lamp [ ] will turn on when the connection is completed.
≥ A live broadcast starts.
≥ If [E-mail Setup] is enabled, a broadcast  notification e-mail is sent to the 
addresses that have been set.
∫ To stop a live broadcast
Press the Wi-Fi/WPS button, and turn off the Wi-Fi mode lamp.
≥If recording is taking place on this unit during a live broadcast, the live broadcast cannot be...