Home > Panasonic > Chair/Seating > Panasonic Household Massage Lounger Epma51 Operating Instructions

Panasonic Household Massage Lounger Epma51 Operating Instructions

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Household Massage Lounger Epma51 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 43
    Add page 21 to Favourites
    image text
    Enable zoom 
    							20
English
4  Adjusting the reclining angle and legrest to massage in relaxing position
To adjust the reclining angle and the legrest angle:
Adjust by pressing 
  button. To adjust the length of the legrest:Length of the legrest can be adjusted by 
pulling on the legrest slide lever and 
pushing with the soles of your feet.
[Extendab
le length to appro

x. 4.7 in. (12 cm)]
See pages 32 to 33 for description on how to adjust the reclining angle, the legrest, and the pillow.
•
5  Setting the Off/On of the Lower Body or Hand/Arm air massage, or Off/On of 
the Leg Stretch
Operation can be turned off/on by pressing    button.
(Off: button lamp off, On: button lamp on)
3   Massaging neck and shoulders only/Massaging back and lower back only
Neck/Shoulder massage will be turned off by pressing 
 button.
Back/Lower Back massage will be turned off by pressing 
 button.
It will resume by pressing it again.
You cannot turn off both Neck/Shoulder and Back/Lower Back 
at the same time.Lamp Off
Display for the position will be turned off when you turn 
off that position. 
(Above display shows only neck and shoulder 
massage)
•
6  
Changing the intensity of the air massage for Lower Body or Hand/Arm
Lower Body
When performing an air massage on the lower body,
(
 will flash at this time)
Adjust by pressing the 
 button.
Hand/Arm
When performing an air massage on the hand and arm,
(
 will flash at this time)
Adjust by pressing the 
 button.
Intensity of the Leg Stretch cannot be adjusted.
Lamps for intensity will be off while performing the Leg Stretch.
See pages 28 to 31 for effective method for usage and operations of the air massage and Leg Stretch.
•
• •
    Add page 22 to Favourites
    image text
    Enable zoom 
    							21
English
1 Press the  button while massaging.
Flash
2 Press the button you want to register from 
, , or .
Settings that can be registered
Intensity for each position (intensity of the program for Stretch 
program)
Off/on of the Ultra deep mode
Off/on of the Neck/Shoulder and Back/Lower back
Off/on and the intensity of the air massage
Off/on of the Leg Stretch
*    Setting at the point when 
, , or  is pressed will be 
registered.
•
•
•
•
•
Beware that the contents registered will not be saved when the power 
switch is turned off or the power cord is unplugged while the massage 
is in progress.
•
1
2
When you want to register the Auto program with 
intensity of massage adjusted to your preference
User Memory Program
    Add page 23 to Favourites
    image text
    Enable zoom 
    							22
English1 Press the  button to turn on the 
power.
The registered button will flash.
2  Select your favorite program.
Press
Massage for the registered program will start after the body 
scanning.
To change and overwrite the registered settings
Press  button.
To delete the registered settings
1  Press the  button to turn on the power.
The registered button will flash.
2 Press the button you want to delete for more than 
3 seconds.
Press
3  Press again if only the pressed button changes to 
flashing.
Press Delete is completed once 
the flashing stops.
1
2
To start the registered program
    Add page 24 to Favourites
    image text
    Enable zoom 
    							23
English When you want the hip area stretched
Stretch Program
2
1
About the Stretch program
This is a program to flex the muscles around the pelvis by twisting 
or lifting using the airbags built-in in the backrest and seat.
•
1 
Press the  button to turn on the 
power.
Flash
The power will turn off automatically if the massage does not start 
within 3  

minutes after turning on the power.
2 Press the  button.
The unit will recline to the massage position automatically. 
(See page 18 for massage position)
Massage heads will press around the lower back to confirm 
someone is seated.
Sit all the way back with your head on the pillow
1 Neck2 Shoulder3 Back4 Lower back
2
3
4
1
Massage heads will return to the retracted position, and the 
Stretch program will start. (about 15 minutes) Stretch program is a program specialized to flex the muscles 
around your pelvis and lower body. 
To be effective, massage for the upper body with massage heads 
and Hand/Arm air massage will not be performed at the same 
time.
• •
•
•
    Add page 25 to Favourites
    image text
    Enable zoom 
    							24
English
Operations of the Stretch program
It will press on the muscles around the pelvis, making the body twist and arch.
It starts off with mild movement, increasing the intensity gradually.
TwistArch
To use the Stretch program effectively
It will be more effective by reclining the backrest.
Press the 
 button.
See pages 32 to 33 for description on how to adjust the reclining angle, the legrest, and the pillow.
•
To customize
Adjusting the intensity of the Stretch program
Intensity can be adjusted with the dial 
on the controller. (4 steps)
Step 4 Step 1
Step 2
Step 3
    Add page 26 to Favourites
    image text
    Enable zoom 
    							25
English
When you want a concentrated massage of a particular 
body part with a specific massage mode, such as 
“Kneading on the Neck” or “Tapping on the Shoulder”
Manual Operation
1 Press the  button to turn on the 
power.
The power will turn off automatically if the massage does not start 
within 3 minutes after turning on the power.
2  Open the cover.
3 Select the part of body you want to 
massage (
).
Select the  button to perform the “Full Roll” or “operation 
combining the Full Roll”.
List of massages operation display that can be 
selected is displayed. 
(Example) When “SHOULDER” is selected•
4  Select the massage operation you prefer.
Massage operation display will change every time 
the button is pressed.
The one flashing is the currently selected operation.
•
•
5 
Press the  button to start the action.
The massage heads will move to selected position automatically 
to start the massage after the body scanning is completed.
Body scanning for Manual Operation
Neck/Shoulder/Full roll 
 ...Normal body scanning.
Back/Lower back   ...   Simple body scanning.  (The massage heads will not come up to 
the shoulder position.)
•
•
•
1
3
5
    Add page 27 to Favourites
    image text
    Enable zoom 
    							26
English
To change an action in the middle of a massage
Select your favorite one again in Steps 3 to 5.
Press the 
 button within approximately 30 seconds after reselecting an action in Step 3, otherwise the reselection will be 
cancelled automatically.
•
1
4 3
5
6
7
2
1 Adjusting the intensity of the massage
Intensity of the massage can be adjusted by 
turning the dial on the controller.
For Manual Operation 
Intensity Sensor is turned off except for Full Roll. 
(See page 19 about the Intensity Sensor for 
Auto Program.)
Intensity is displayed in 8 steps.
Intensity will not change further even if you keep 
turning the dial when the intensity is set to 
maxim
um (8

 bars are displayed) or minimum 
(1 bar is displayed).
•
•
•
Caution
Intensity might increase drastically when the intensity is increased in multiple 
steps. Always increase the intensity one step at a time, checking how it feels.
For safety reasons, it is designed not to increase the intensity drastically even if  the dial is turned rapidly.
•
To customize
2  
Stretching your full back with the Full Roll
During a Full Roll operation,  
By pressing the 
 button, it will change to full stretch feeling by the 
adjustment of intensity, as mentioned above.
It will be deactivated by pressing it again. Ultra Deep Mode is a mode that is set to massage with a stronger intensity t\
han 
the setting of the Intensity Sensor. The display of the intensity mentioned above 
will not change even if this button is pressed.
The Ultra Deep Mode cannot be used in the Manual Operation except for the Full Roll.
•
•
3  
Adjusting the reclining angle and legrest to 
massage in relaxing position
To adjust the reclining angle 
and the legrest angle:
Adjust by pressing  
  button. To adjust the length of the legrest:
Length of the legrest can 
be adjusted by pulling on 
the legrest slide lever and 
pushing with the soles of 
your feet.
[Extendable length to 
appro
x.

 4.7 in. (12 cm)]
See pages 32 to 33 for description on how to adjust the reclining angle, the 
legrest, and the pillow.
•
    Add page 28 to Favourites
    image text
    Enable zoom 
    							27
English
5 Fine adjustment of the position
It can be adjusted with the  button.
4 Adding tapping actions to the current operation
Press the  button.
Select with steps 3 to 5 on page 25 if you only want the tapping actions to be performed.
•
6  Using Lower Body air massage, Hand/Arm air massage and/or Leg Stretch 
together
Operation can be turned off/on by pressing    button.
(Off: button lamp off, On: button lamp on)
7   Changing the intensity of the air massage for Lower Body or Hand/Arm
Lower Body
When performing an air massage on the lower body,
(
 will flash at this time)
Adjust by pressing the 
 button.
Hand/Arm
When performing an air massage on the hand and arm,
(
 will flash at this time)
Adjust by pressing the 
 button.
Intensity of the Leg Stretch cannot be adjusted.
Lamps for intensity will be off while performing the Leg Stretch.
See pages 28 to 31 for effective method for usage and operations of the air massage and Leg Stretch.
•
• •
    Add page 29 to Favourites
    image text
    Enable zoom 
    							28
English
When you want to perform Lower Body air 
massage, Hand/Arm air massage and/or Leg Stretch
Air Massage
1
3
1 Press the  button to turn on the 
power.
The power will turn off automatically if the massage does not start 
within 3 minutes after turning on the power.
2  Open the cover.
3 Select the operation with  and/or 
 buttons.
(Off: button lamp off, On: button lamp on) •
  Changing the intensity of the air massage 
for Lower Body or Hand/Arm
Lower Body
When performing an air massage on the lower body,
(
 will flash at this time)
Adjust by pressing the 
 button.
Lower 
back
Seat
Thigh
Leg/Sole
Hand/Arm
When performing an air massage on the hand and arm,
(
 will flash at this time)
Adjust by pressing the 
 button.
Hand/Arm
Intensity of the Leg Stretch cannot be adjusted.
Lamps for intensity will be off while performing the Leg Stretch.
See pages 28 to 31 for effective method for usage and operations of 
the air massage and Leg Stretch.
•
•
•
    Add page 30 to Favourites
    image text
    Enable zoom 
    							29
English
For the sole reflexology plate
The plates are removable.
OpeningTo insert the plate
Each plate is different slightly. Be sure to follow the pictures 
below to insert correctly.
Projections are on 
the upper side. Toe
Heel
For the left foot For the right foot
Effective method for using the Lower Body massage
See page 31 for details about the operations of the Lower Body massage.
Adjust the legrest so that your sole fits on it completely.
For a person with small body dimensionsFor a person with large body dimensions
If the legrest is raised, it is easier to fit your sole on it.
Press the 
 button.
• Knees will not be lifted as much if you adjust the length of the 
legrest.
Pull the legrest 
slide lever.
Push with the soles 
of your feet to slide 
the legrest out.
Lift your soles slightly 
and the legrest returns.
Knees will not be lifted as much also by lowering the legrest.
Press the 
 button.
•
•
It is possible to massage your leg completely by 
laying the sole section flat.
Sole section
•
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Household Massage Lounger Epma51 Operating Instructions