Panasonic Household Massage Lounger Epma10 Operating Instructions

10
English
Confirm	that	the	main	unit	and	the	accessories	are	in	the	box.
Main	unit
Width:	Approx. 	26.8	in.	(68	cm)
Height:	Approx. 	28.3	in.	(72	cm)
Length: 	Approx. 	61.0	in.	(155	cm)
Accessories
Armrests	(Right/Left)
Left/Right	indication
Control	Panel	Stand
Fixing	screw
Contr

ol	panel	
holder
The	direction	of	the	holder	can	be	
adjusted	with	the	revolving	ball	joint.
•
Sole	Shiatsu	Sheet
This	is	installed	on	the	
sole	massage	section	
prior	to	leaving	the	
factory.•
Right	Side	CoverLeft	Side...

11
English	ASSEMBLY
1.	Attaching	the	armrests	(On	both	the	right	and	left	sides)
1	Insert	the	armrest	into	
the	unit.
Be	careful	to	avoid	pinching	your	
fingers.
1.	Align	the	protrusions	on	the	
unit	with	the	grooves	in	the	
armrest.
2.

	Align	the	front	protrusion	 on	the	armrest	with	the	
groove	on	the	unit	and	align	
the	rear	protrusion	of	the	
armrest	with	the	position	of	
A. 	
3.	Press	the	armrest	 downwards	while	
simultaneously	pushing	it	
towards	the	seat.
	 Fit	the	unit	protrusions	into	 the...

12
English
2	Fasten	the	armrest	with	the	attachment	screws.
Set	the	two	attachment	screws	in	
place	with	the	allen	key	first	and	
then	tighten	firmly.
Attachment	Screws	(M6	×	16)
Right	armrest	—	2	pcs.
Left	armrest	—	2	pcs.
Attachment	Screw
Allen	key
Turn	screws	clockwise	to	tighten.
Allen	key Attachment	Screw
BackFront
How	to	tighten	the	screws
Allen	key
Hole Put 	an	attachment	screw	on	the	edge	of	the	allen	key	and	tighten	the	screw	
horizontally	to	the	hole.
Screw	may	be	damaged	if	you	tighten	the...

13
English
3.	Attaching	the	side	covers	(On	both	the	right	and	left	sides)
The	method	for	attaching	the	covers	is	the	same	for	both	sides. 	
The	diagram	shows	the	right	side	where	the	control	panel	stand	is	
attached. Right
 	Side	Cover Left	Side	Cover
1	Insert	the	bottom	tabs	on	the	cover	
into	the	bottom	notches	on	the	
armrest.2	Insert	the	top	tabs	into	the	notches	on	 the	armrest.
Bottom	tabs
Notches Right
 	side	cover
Top	tabs
Notches
Push	the	cover	until	
you	hear	it	click.
Removing	the	side	cover...

14
English
5.	Raising	the	backrest	to	the	upright	position
1	Insert	the	power	plug	into	the	power	outlet.
2	Confirm	the	lock	switch	key	is	set	to	the	
“open” 	position.
3	Confirm	the	power	switch	is	set	to	the	 “on”	
position.
4	Press	the		button	on	the	control	panel	
twice.
Press	once,	and	then	press	again	approx. 	1	second	later.	
The
	backrest	will	rise	to	the	upright	position	automatically.
•
1
6.
	Placing	the	control	panel	into	the	control	panel	stand
1	Fit	the	groove	on	the	side	of	the	
control...

15
English	BEFORE	SITTING	DOWN
Check	the	following	before	using	the	unit
1.	Check	the	surrounding	area
Make	sure	there	are	no	objects,	people,	or	pets	in	the	vicinity	of	the	unit.
2.	Check	the	power	cord	and	the	power	plug
	See	 Warning	No. 	8	on	page	1.
3.	Be	sure	to	push	the	connector	all	the	way	into	the	appliance	inlet
4.	Switching	on	the	power	supply
1	Insert	the	power	plug	into	an	
electrical	outlet.
2	Turn	the	lock	switch	key	to	the	 “open”	
position.
3	Slide	the	power	switch	to	the	 “on”...

16
English
5.	Check	the	unit
1 3
4
1	Make	sure	the	covering	is	free	of	rips	or	tears.
2	Make	sure	there	are	no	obstacles	between	 the	parts	of	the	unit.
3	Make	sure	the	massage	heads	are	in	the	retracted	position, 	i.e.	they	are	parked	to	the	
left 	and 	right 	in 	the 	upper 	part 	of 	the 	backrest.
If	not	retracted,	press		twice	to	return	the	massage	heads	to	the	
retracted	position.
4	Make	sure	the	legrest	is	lowered. 	
Do	not	sit	on	the	legrest	when	it	is	raised. 	Doing	so	may	cause	it	to	
collapse...

17
English	SELECTING	A	MENU	AND	STARTING	THE	MASSAGE
The	illumination	will	light	up	and	sound	
will	start	when	you	sit	down.
To	stop	the	sound,	press	the		button	1.		is	lit	on	
the	display.
To	stop	the	illumination,	press	the	
	button	2.
Color
	of	the	illumination	will	change	according	to	the	operation.
If	the	illumination	does	not	light	up	and	sound	does	not	start	
after	sitting	down,	sit	back	deeply	in	the	chair.
•
•
•
•


After	15	minutes	of	use,	we	recommend	that	you	take	a	10	minute	break.
Use	the...

18
English
4	Adjusting	shoulder	position
The	massage	heads	will	move	to	the	shoulder	area	while	tapping.
Fine	adjust	the	position	of	the	massage	heads	to	the	position	of	your	shoulders	when	you	hear	beeps	and	
	starts	
flashing.	
(The

	program	will	start	after	approximately	15	seconds.)
The	shoulder	position	can	be	changed	during	the	auto	program	massage.

A	single	press	of	
the	button	will	
raise	or	lower	the	
massage	heads	
approximately	
0.6	in.	(1.5	cm).
Caution
Keep	your	head	on	the	
bac
 krest...

19
English5	Making	Adjustments
A	
Adjusting	the	intensity	of	the	upper	body	massage
Stronger
Weaker Upper
 	body	intensity	display	(3	levels)
Intensity	1 Intensity	2 Intensity	3
B	Adjusting	the	intensity	of	the	lower	body	massage
Stronger
Weaker Lo
 wer	body	intensity	display
Intensity	1 Intensity	2 Intensity	3
C	Turning	off	the	lower	body	actions
Leg/foot	massage	is	turned	off	
when	pressed.
	
It

	will	turn	back	on	by	pressing	
again.
Leg	stretch	is	turned	off	when	
pressed.	
It

	will	turn	back	on	by...