Home
>
Panasonic
>
Chair/Seating
>
Panasonic Household Massage Lounger Ep3513 Operating Instructions
Panasonic Household Massage Lounger Ep3513 Operating Instructions
Have a look at the manual Panasonic Household Massage Lounger Ep3513 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
hands/armsintensityhands/armsintensityhands/armsintensity lower bodyintensitylower bodyintensitylower bodyintensity upper bodyintensity speedupper bodyintensity speed intensity upper body lower body hands / arms 19 upper bodyintensity speed lower bodyintensity hands/armsintensity Upper body Lower body Hands/arms Strength Levels 0(No massage)123 USING THE PRE-PROGRAM AND QUICK MASSAGES – Adjusting to Your Preference to adjust. Press to toggle on/off. Press • Lower body and hand/arm massages will stop when set to zero. The display will indicate whether leg stretch and back vibration functions are turned on or off. (Lit areas indicate active functions. Unlit areas indicate inactive functions.) Leg Stretch Back Vibration Adjusting Massage Strength Turning Back Vibration and Leg Stretch Functions Off and On During a Program leg stretch off/onvibration off/on
20 Overall LooseningNeck/Shoulder ShiatsuUpper/Lower- Back ShiatsuNeck/Shoulder ShiatsuUpper/Lower- Back ShiatsuShoulder ShiatsuLower-Back ShiatsuFinishing Touches Overall LooseningNeck/Shoulder KneadingUpper/Lower- Back KneadingNeck/Shoulder KneadingUpper/Lower- Back KneadingShoulder KneadingLower-Back ShiatsuFinishing Touches Overall LooseningShoulder Focused SwedishUpper/Lower- Back Focused SwedishNeck/Shoulder Focused SwedishUpper/Lower- Back Focused SwedishOverall Swedish (Emphasis on Neck/Shoulders)Overall Swedish (Emphasis on Neck/Shoulders)Finishing Touches Overall LooseningNarrow PressingNarrow StretchingUpper/Lower- Back PressingNarrow PressingNarrow StretchingNarrow PressingFinishing Touches Overall LooseningNeck/Shoulder KneadingUpper/Lower- Back KneadingFinishing Touches • Swedish B • Tap B • Knead A • Knead E • Knead C • Shiatsu D • Shiatsu A • Swedish B• Knead A + Tap B • Full Roll • Swedish B• Swedish C • Compression A• Full Roll • Compression A • Compression B• Swedish B • Full Roll • Compression A • Full Roll • Full Roll • Compression A • Full Roll • Grasp A • Knead B • Swedish B • Swedish C • Swedish D • Swedish A • Swedish B • Knead B • Knead D • Swedish A • Swedish D • Swedish B• Swedish B • Tap B • Swedish D • Swedish A • Swedish B • Knead B • Swedish B • Swedish C • Swedish B • Knead D + Tap C • Swedish B • Swedish B • Tap B• Knead B • Swedish B + Tap B • Swedish B • Swedish B • Tap B• Swedish C • Knead C • Shiatsu D• Knead C • Shiatsu D • Knead A • Knead E • Knead D • Knead B• Knead A • Knead E • Knead D • Knead B • Knead D + Tap C• Swedish B • Tap B • Swedish C • Shiatsu C • Shiatsu A • Shiatsu D• Shiatsu A • Shiatsu D • Knead E• Swedish B • Tap B • Swedish C • Shiatsu C • Shiatsu A • Shiatsu D• Tap B • Shiatsu E • Shiatsu B • Knead E• Tap B • Shiatsu E • Shiatsu B • Knead E Overview of Pre-Program and Quick Massages (Upper Body) Additional Information Shiatsu Program (I) Deep Program (II) Swedish Program (III) Stretch Program (IV) Quick Program (V) • Swedish B • Tap B
nal lateral lower back lower body back neck/shoulderhands/arms OK self program time input lower body hands /armsintensity intensity self program ottoman reclining quick stretchself program user shiatsu deep swedish time pre-programs upper bodyintensity speed voice off/on time remaining open openself program time input manual controlsintensity focusupper body lower body hands / armsvibration off/onleg stretch off/onneck / back roller position 21 Panel Cover Open timetimetime 12 USING THE SELF PROGRAM – Basic Usage Recommended when certain areas of your body are more fatigued than others. Program Strength buttonsRoller Position button Back Vibration OFF/ON button Leg Stretch OFF/ON button Self Program Creation buttons Setting Examples for Self Program (A), (B) and (C) below are provided as examples of how you can use the self program to create a massage using different time settings for different parts of your body. (A) “My neck and shoulders are always particularly stiff, so I’ll focus the massage on my neck and shoulders.”(B) “My upper back and lower back are the only parts that feel tired today, so I’ll just massage my upper and lower back.”(C) “I’ve had a pre-program massage, but now I’d like to massage just my legs for awhile.” Reference Setting Example Setting Example Setting Example These buttons will flash.1. Press to turn on the power. • The massage heads will remain stationary until a massage program is selected.
22 self program time The display will flash. lower back lower body back neck/shoulderhands/arms OK self program time input(1) Set the time for each area of the body. • The time will change, as shown below, according to the number of times pressed. (2) Press after completing settings for each body area. • The selected program will be configured to reflect your time settings. 2. Press . 3. Open the cover and input the time settings. 4. Close the cover. • If the cover is left open, you will be unable to use the Leg Stretch OFF/ON, Back Vibration OFF/ON, Program Strength or Focus buttons during the massage. OK From this point on the instructions for operation are the same as those for those once a massage program is selected, as covered starting from step 2 of page 16. Strength adjustment, on/off switching of leg stretch and back vibration functions are performed in the same way. (See Page 19) • The duration of a massage in the self program mode is approximately 15 minutes. • Body scanning is not performed when all time settings for the upper body are set to zero. Upper-body vibration will also be inactive in this case. • If time settings for the lower body are set to zero, the massage will commence with leg stretch function set to off. This function may be turned on by pressing the Leg Stretch OFF/ON button.
lower back lower body back neck/shoulderhands/arms OK self program time input user user user user self program time user 23 USING THE SELF PROGRAM Changing Time Settings Part Way through a Massage 1. Open the cover and input the time settings. (1) Open the cover and input the time settings you want to change. (2) Press after completing setting adjustments. The program will be reconfigured to reflect the change(s) made to settings. (1) Press . (2) Press the button used to record your data. (3) Press . Changing Recorded Time Settings See “Changing Time Settings Part Way through a Massage” above. • The recorded time settings will be displayed. The program with the recorded time settings will begin immediately. OK 2. Close the cover. • If the cover is left open, you will be unable to use the Leg Stretch OFF/ON, Back Vibration OFF/ON, Program Strength or Focus buttons during the massage. • This indicates that settings have already been recorded using that User Memory button. To record over the existing data, press the same button once more. (The existing data will be deleted.) To keep the existing data, press another User Memory button. Saving Time by Recording Time Settings Advanced Usage Recording Time Settings Beginning a Massage Using Recorded Time Settings When the Selected Button Flashes Rapidly After the massage finishes or is pressed to finish the massage, proceed as follows. When the buttons flash… Press the User Memory button you want to record your settings to. Rapid FlashingOnly Pressed Button Flashes Recording Complete
24 Uses mainly Shiatsu A to undo knots of tension. Uses mainly Knead B to manipulate and relax muscles. Uses mainly rubbing actions like Swedish B to gently massage and alleviate fatigue. Uses mainly Shiatsu E to undo knots of tension. Uses mainly Knead A and Knead B to broadly manipulate and relax muscles. Uses mainly rubbing actions like Swedish A to gently massage and alleviate fatigue. Uses mainly Shiatsu E and Knead E to undo knots of tension. Uses mainly light, penetrating actions to briskly loosen muscles. Uses mainly rubbing actions like Swedish D to gently massage and alleviate fatigue. Uses mainly slow, powerful actions to vigorously loosen muscles. Uses mainly light, penetrating actions to briskly loosen muscles. Uses mainly strong upward strokes to promote circulation and alleviate tiredness. Uses mainly rhythmical loosening actions to thoroughly relax muscles. After using rhythmical loosening, thorough kneading is used to promote circulation. Uses mainly strong upward strokes to promote circulation and alleviate tiredness. Order of Massage for Upper Body About the Time Settings in Self Program • The type and duration of massage actions in self program are determined according to different areas of the body based on the time settings. • Areas are massaged in order of the longest to the shortest time setting. • When two areas are set to the same time setting, the massage will proceed in order of the neck and shoulders, the upper back and the lower back areas. When the Time Setting is Zero • An area of the body set at zero will not receive any massage. In the case of the upper body, however, the massage heads may travel over that area as they move to the next massage area. • The upper body will not receive any massage when all settings for the upper back, lower back, and neck and shoulders are at zero. Order of Massage for Hands/Arms and Lower Body • Massaged in order of lower body then hands and arms, regardless of time settings. Additional Information Overview of Massages in the Self Program Additional Information Neck/Shoulders Upper Back Lower Back Lower Body Hands/Arms
lower body hands /armsintensity intensity self program ottoman reclining quick stretchself program user shiatsu deep swedish time pre-programs upper bodyintensity speed voice off/on time remaining open openself program time input manual controlsintensity focusupper body lower body hands / armsvibration off/onleg stretch off/onneck / back roller position 25 Press to adjust. Flashes when action repeated. Adjusted direction flashes. neck / back roller position Animation on Controller Display Animation on Controller Display Press . focus 1 3 21. Begin a massage program as described on pages 15 to 22. • Select one of the pre-program massages or the quick or self program massage. • The massage action in progress when the button is pressed is repeated. • The same action at the same position within the program is repeated. • The program is modified to increase the massage action at the point on the body when the button was pressed. • The orientation of the massage heads touching the body is adjusted. (See page 28 for the adjustable range.) • The massage heads automatically shift to the same position they were adjusted to within the program. • The adjustment is also reflected in other massage programs. 2. Making adjustments to your liking during the massage. When you find a spot that feels good… ADVANCED USAGE WITH THE USER MEMORY FUNCTION A function that allows you to create customized programs for massages better suited to your needs. Change and record massage programs according to your preference. When the position of the massage heads is a little off… user user useruser • This indicates that settings have already been recorded using that User Memory button. To record over the existing data, press the same button once more. (The existing data will be deleted.) To keep the existing data, press another User Memory button. When the Selected Button Flashes Rapidly After the massage finishes or is pressed to finish the massage, proceed as follows. When the buttons flash… Press the User Memory button you want to record your settings to. Rapid Flashing 3. Record the adjustments you have made. Recording Complete Animation on Controller DisplayOnly Pressed Button Flashes
Displayed when is lit up self program time upper body lower body hands/arms intensity intensity speed intensity time remaining lower body hands /armsintensity intensity self program ottoman reclining quick stretchself program user shiatsu deep swedish time pre-programs upper bodyintensity speed voice off/on time remaining open openself program time input manual controlsintensity focusupper body lower body hands / armsvibration off/onleg stretch off/onneck / back roller position 26 Program Selection Buttons Display Buttons light up in order from left to right. Settings shown are those of the Massage Program button that is lit up. The volume setting of the voice guidance is also recorded. • Settings can be recorded when the program finishes or is pressed to finish the massage. (Setting changes cannot be recorded when the program is finished by pressing or when the changes to settings were made in manual operation.) • Setting changes are recorded in the same way as described in “Change and record massage programs according to your preference.” Recordable Settings • Settings are divided between those that are recorded for individual programs and those that are recorded as settings shared by all programs. Record changes made to individual settings during a massage program. Leg Stretch OFF/ON button Voice Guidance Volume Setting Program Strength SettingsBack Vibration OFF/ON Setting About Recorded Massage Settings Shown on the Display • The settings you record after a massage finishes or is pressed to finish a massage are displayed on the control panel. • Setting adjustments shown on the display do not indicate changes made to recorded settings unless the above procedure has been performed (“3. Record the adjustments you have made.”). Additional Information self program time Program Strength Settings (Hands/Arms, Lower Body)Back Vibration OFF/ON SettingsProgram Strength Settings (Upper Body) Time Settings Body Scanning DataLeg Stretch OFF/ON Setting
lower body hands /armsintensity intensity self program ottoman reclining quick stretchself program user shiatsu deep swedish time pre-programs upper bodyintensity speed voice off/on time remaining open openself program time input manual controlsintensity focusupper body lower body hands / armsvibration off/onleg stretch off/onneck / back roller position 27 3 2 1 1. Press to turn on the power. 2. Press the button used to record your data. • The massage lounger will carry out body scanning to check whether or not someone with the same physical characteristics is using the unit. • The program will start immediately if the occupant is determined to have the same physical characteristics. • The body scanning will be performed if physical characteristics are determined to be different due to the occupant’s sitting position, etc. (See Page 16)If time settings are recorded… A massage using the recorded time settings will start. To change time settings, please see page 23.If time settings are not recorded… Set time settings according to the steps given on pages 21 to 22. When You Want to Use Your Recorded Massage Settings user 3. Press one of the flashing buttons ( , , , , or ) to select a program. When , , , or Are SelectedWhen Is Selected Creating a Customized Program Adjust settings as desired and record to the same User Memory button using the steps given in “Change and record massage programs according to your preference.” on page 25.
useruser user user user 28 user Flashing Approx. 0.9 (2.4 cm) Approx. 0.9 (2.4 cm)Approx. 0.4 (1.0 cm) 0.2 (0.5 cm) 0.5 (1.2 cm) 0.5 (1.2 cm) 0.2 (0.5 cm) Approx. 0.4 (1.0 cm) 4. Press the button once again while it is flashing. Change to steady light indicates completion. Only the button pressed lights up. 3. When the Program Selection buttons light up… Press the same button again and hold for 3 or more seconds. 2. Press the button corre- sponding to the data you wish to delete. 1. Turn on the power. Erasing Recorded Data Number of Times an Action Is Repeated About the Focus Function • Action in progress when the Focus button is pressed is repeated twice. (The duration of the program will not be extended.) Memory Available for Recording Repeated Actions • Eight repeated actions can be memorized. • After 8 actions, new ones are recorded by overwriting the oldest action in memory. Additional Information Range of Roller Position button About the Massage Position Adjustment Function Vertical or lateral adjustment by pressing up to 2 times in any direction (up, down, left or right) The above adjustments cannot be made in the case of certain massage actions or massage on certain of the body. Adjustable Range Vertical movement: 0.9 in. (2.4 cm) (up and down) Lateral movement: 0.4 in (1.0 cm) (left and right) Additional Information neck / back roller position The pre-program massages were created based on massages practiced by professional massage therapists in accordance with the aim of each program. The user memory function preserves the basic massage actions of these programs and allows them to be used as a base upon which to build personalized massages. For this reason, the maximum number of repeated actions that may be recorded is eight, so that a massage cannot be focused on one area of the body. Please use either the self program or manual operation when you want a massage that focuses on a particular area of the body. Two Times Two TimesTwo Times Two Times