Panasonic Home Theater Audio System Sc-hte80 Owners Manual

							RQT9860-1Y
Owner’s Manual
Home Theater Audio System
Model No.
 SC-HTE80
PPThank you for purchasing this product. 
For optimum performance and safety, please read these instructions 
carefully.
Please keep this manual for future reference.
If you have any questions, visit:
U.S.A. and Puerto Rico: www.panasonic.com/support
Canada: www.panasonic.ca/english/support
Register online at www.panasonic.com/register (U.S. customers only)RQT9860-Y_en_us.fm  Page 1  Monday, February 10, 2014  10:05 AM 
						

							2RQT9860User memo:Supplied accessoriesCheck and identify the supplied accessories.
Use numbers indicated in parentheses when asking for 
replacement parts. (Product numbers correct as of 
November 2013. This may be subject to change.)
For U.S.A. and Puerto Rico: To order accessories, refer 
to “Accessory Purchases (United States and Puerto 
Rico)” on page 16.
For Canada: To order accessories, call the dealer from 
whom you have made your purchase.1 AC power supply cord
(K2CB2CB00022)1 Remote control (with a battery)
(N2QAYC000098)
(Only for Canada)
The included Canadian French label sheet corresponds 
to the English printing on the main unit and remote 
control.Do the procedures with the remote control. You can 
also use the buttons on the main unit if they are the 
same.
Your system and the illustrations can look differently.
The model number and serial number of this product 
can be found on either the back or the bottom of the 
unit. Please note them in the space provided below and 
keep for future reference.
MODEL NUMBER SC-HTE80
SERIAL NUMBER
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
IMPORTANT SAFETY 
INSTRUCTIONSRead these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the 
applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as 
radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. 
If the provided plug does not fit into your outlet, 
consult an electrician for replacement of the obsolete 
outlet.10. Protect the power cord from being walked on or 
pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus.
11. Only use attachments/accessories specified by the 
manufacturer.
12. Use only with the cart, stand, tripod, 
bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, 
use caution when moving the 
cart/apparatus combination to 
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or 
when unused for long periods of time.
14. Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.
RQT9860-Y_en_us.fm  Page 2  Monday, February 10, 2014  10:05 AM 
						

							3RQT9860
Safety precautionsWARNING!Unit
• To reduce the risk of fire, electric shock or product 
damage,
– Do not expose this unit to rain, moisture, dripping or 
splashing.
– Do not place objects filled with liquids, such as 
vases, on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to 
qualified service personnel.
AC power supply cord
• The power plug is the disconnecting device. 
Install this unit so that the power plug can be 
unplugged from the socket outlet immediately.
Button-type battery (Lithium battery)
• Risk of fire, explosion and burns. Do not disassemble, 
heat above 60°C (140°F) or incinerate.CAUTION!Unit
• To reduce the risk of fire, electric shock or product 
damage,
– Do not install or place this unit in a bookcase, built-in 
cabinet or in another confined space. Ensure this 
unit is well ventilated.
– Do not obstruct this unit’s ventilation openings with 
newspapers, tablecloths, curtains, and similar items.
– Do not place sources of naked flames, such as 
lighted candles, on this unit.
• Do not touch the bottom of the unit. It might be hot 
when you use it for a long period.Button-type battery (Lithium battery)
• Insert with poles aligned.
• Do not touch the terminals (+ and –) with metal objects.
• Do not recharge, disassemble, remodel, heat or throw 
into fire.
• Keep out of reach of children.
• If any electrolyte should come into contact with your 
hands or clothes, wash it off thoroughly with water.
• If any electrolyte should come into contact with your 
eyes, never rub the eyes. Rinse eyes thoroughly with 
water, and then consult a doctor.
• Danger of explosion if battery is incorrectly replaced. 
Replace only with the type recommended by the 
manufacturer.
• When disposing the batteries, please contact your 
local authorities or dealer and ask for the correct 
method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct 
sunlight for a long period of time with doors and 
windows closed.
DO NOT INGEST BATTERY, 
CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the 
coin/button cell battery is swallowed, it can cause 
severe internal burns in just 2 hours and can lead to 
death. Keep new and used batteries away from 
children. If the battery compartment does not close 
securely, stop using the product and keep it away from 
children. If you think batteries might have been 
swallowed or placed inside any part of the body, seek 
immediate medical attention.

This product contains a CR Coin Cell Lithium Battery 
which contains Perchlorate Material ‒ special handling 
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
.
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS 
INSIDE.
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.
The lightning flash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the 
presence of uninsulated “dangerous 
voltage” within the product’s enclosure 
that may be of sufficient magnitude to 
constitute a risk of electric shock to 
persons.
The exclamation point within an 
equilateral triangle is intended to alert 
the user to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance.
ENGLISH
RQT9860-Y_en_us.fm  Page 3  Monday, February 10, 2014  10:05 AM 
						

							4RQT9860THE FOLLOWING APPLIES ONLY IN THE U.S.A. THE FOLLOWING APPLIES ONLY IN CANADA 
THE FOLLOWING APPLIES IN THE U.S.A. AND 
CANADA
Table of contentsSupplied accessories  . . . . . . . . . . . . . . . . . . . . .  2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . .  2
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . .  3
About Bluetooth
®. . . . . . . . . . . . . . . . . . . . . . . . .  5
Overview of controls . . . . . . . . . . . . . . . . . . . . . .  6
Preparing the remote control  . . . . . . . . . . . . . . .  7
Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Basic controls  . . . . . . . . . . . . . . . . . . . . . . . . . .  10
One-Touch Connection (NFC) . . . . . . . . . . . . . .  10
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Linked operations with the TV (VIERA Link™ 
HDAVI Control™) . . . . . . . . . . . . . . . . . . . . . . . .  12
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .  13
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
Limited Warranty (ONLY FOR U.S.A. AND 
PUERTO RICO) . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Limited Warranty (ONLY FOR CANADA) . . . . .  17
FCC Note:
This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules.
These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause 
harmful interference to radio communications. 
However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following 
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and 
receiver.
• Connect the equipment into an outlet on a circuit 
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV 
technician for help.
Any unauthorized changes or modifications to this 
equipment would void the user’s authority to operate 
this device.
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, 
and (2) this device must accept any interference 
received, including interference that may cause 
undesired operation.
Responsible Party:
Panasonic Corporation of North America
Two Riverfront Plaza, Newark, NJ 07102-5490
Support Contact: 
http://www.panasonic.com/contactinfo
Conforms to UL STD 60065.
CAN ICES-3(B)/NMB-3(B)
Certified to CAN-CSA STD C22.2 No.60065.
This device complies with RSS-GEN, RSS-210 of the 
IC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful 
interference, (2) This device must accept any 
interference received, including interference that may 
cause undesired operation of the device.
This transmitter must not be co-located or operated in 
conjunction with any other antenna or transmitter.
This equipment complies with FCC/IC radiation 
exposure limits set forth for an uncontrolled 
environment and meets the FCC radio frequency (RF) 
Exposure Guidelines in Supplement C to OET65 and 
RSS-102 of the IC radio frequency (RF) Exposure 
rules. This equipment has very low levels of RF energy 
that is deemed to comply without maximum permissive 
exposure evaluation (MPE). But it is desirable that it 
should be installed and operated keeping the radiator 
at least 20 cm (7⅞”) or more away from person’s body 
(excluding extremities: hands, wrists, feet and ankles).
RQT9860-Y_en_us.fm  Page 4  Monday, February 10, 2014  10:05 AM 
						

							5RQT9860
About Bluetooth
®
Frequency band
• This system uses the 2.4 GHz frequency band.
Certification
• This system conforms to the frequency restrictions and 
has received certification based on frequency laws. 
Thus, a wireless permit is not necessary.
• The actions below are punishable by law:
– Taking apart or modifying the main unit.
– Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
® 
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth 
SIG, Inc.
• Depending on the specifications and settings of a 
device, it can fail to connect or some operations can be 
different.
• This system supports Bluetooth
® security features. But 
depending on the operating environment and/or 
settings, this security is possibly not sufficient. 
Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
® 
device.
Range of use
• Use this device at a maximum range of 10 m (33 ft).
• The range can decrease depending on the 
environment, obstacles or interference.Interference from other devices
• This system may not function properly and troubles 
such as noise and sound jumps may arise due to radio 
wave interference if this unit is located too close to 
other Bluetooth
® devices or the devices that use the 
2.4 GHz band.
• This system may not function properly if radio waves 
from a nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.• Do not use this system near an equipment or in an 
environment that is sensitive to radio frequency 
interference (example: airports, hospitals, laboratories, 
etc.). Panasonic bears no responsibility for data and/or 
information that can possibly be compromised during a 
wireless transmission.
Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are 
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 
5,956,674; 5,974,380; 6,487,535 & other U.S. and 
worldwide patents issued & pending. DTS, the Symbol, 
& DTS and the Symbol together are registered 
trademarks & DTS Digital Surround and the DTS logos 
are trademarks of DTS, Inc. Product includes software. 
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition Multimedia 
Interface are trademarks or registered trademarks of 
HDMI Licensing LLC in the United States and other 
countries.
HDAVI Control™ is a trademark of Panasonic 
Corporation.
VIERA LINK™ is a trademark of Panasonic 
Corporation.
EZ Sync™ is a trademark of Panasonic Corporation.
The Bluetooth
® word mark and logos are owned by the 
Bluetooth SIG, Inc. and any use of such marks by 
Panasonic Corporation is under license. Other 
trademarks and trade names are those of their 
respective owners.
Google Play and Android are trademarks of Google Inc.
ENGLISH
RQT9860-Y_en_us.fm  Page 5  Monday, February 10, 2014  10:05 AM 
						

							6RQT9860Over view of controls
MUTE
SETUPINPUT
SOUND
OKPAIRING
IJ
B F A K
Front panelSide view
L
MNO P Q
Rear panel
A
Standby/on switch [`], [1]
Press to turn the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a 
small amount of power.
B
Select input source
C
View setup menu
D
View sound menu
E
Select Bluetooth
® mode
Start Bluetooth® pairing mode
F
Adjust the volume of the system
G
Mute the sound of the system
To cancel, press the button again.
“MUTE” is also canceled when you adjust the volume 
or when you turn off the system.
H
Select and confirm the option
I
Remote control sensor
Distance: Within approximately 7 m (23 ft)
Angle: Approximately 20° up and down, 30° left and 
right
J
Display panel
K
NFC touch area
L
AC IN terminal
M
HDMI IN terminal (BD/DVD)
N
HDMI OUT terminal (ARC compatible)
O
DIGITAL AUDIO IN (TV) terminal
P
USB port (for service use only)
Q
AUX IN terminal
TV BD/DVDBLUETOOTH
AUX
RQT9860-Y_en_us.fm  Page 6  Monday, February 10, 2014  10:05 AM 
						

							7RQT9860
Preparing the remote controlBefore usingRemove the insulation sheet before you use the remote 
control for the first time.Replacing the batteryReplace the remote control battery when it stops working 
or when the range is decreased. Replace with a new 
battery (CR2025 3V lithium battery) only.1
While pressing the stopper, pull out the battery 
holder.
2
Insert a new battery with the (+) side facing up.
3
Push back battery holder completely.
CAUTION!
Keep the button-type battery out of reach of children to 
prevent swallowing.Insulation 
sheet
PlacementWhen the TV is less than 30 kg (66 lbs), and the pedestal 
of the TV is within 460 mm (18⅛″) (width) by 280 mm 
(11″) (depth), then you can put the TV on top of the 
system.Otherwise, put the system on the right side 
(recommended) of the TV or on a rack.
Note:
• Do not put the system in a metal cabinet.
• Keep other 2.4 GHz frequency band electronic devices 
such as wireless router, cordless phone, etc. at least 
2 m (6½ ft) away from this system to avoid wireless 
interference.
• If uneven colors are displayed on the TV, turn off the 
TV for 30 minutes. If the demagnetizing of the TV does 
not correct the problem, increase the distance between 
this system and the TV.
• Keep magnetized items away from the system. 
Magnetized cards, watches, etc., can be damaged if it 
is too near to the system. CAUTION!
• Keep the TV within the distance of the system. Be 
careful not to tip over the TV as it can cause injury.
• Install the anti-tip device for your TV. For installation 
details, refer to the owner’s manual for the TV. If your 
TV does not come with an anti-tip device, consult 
your dealer.
• Moving the TV on the surface of the system can 
scratch the system. Lift the TV when you need to 
move it.
32 1
460 mm (18
é
Ž)
280 mm


						

							8RQT9860ConnectionTurn off all equipment before connecting.
Components and cables are sold separately.
Connect the AC power supply cord only after all the 
other connections have been made.Connecting the TVConnect an ARC compatible TVConnect an ARC compatible terminal of the TV with an 
ARC compatible high speed HDMI cable.
ARC (Audio Return Channel)
ARC is an HDMI function that lets you enjoy both sound 
and TV pictures with one HDMI cable.
Connect a non-ARC compatible TVNote:
The HDMI connection supports VIERA Link “HDAVI 
Control” when connected with a Panasonic TV 
(Z“Linked operations with the TV (VIERA Link™ HDAVI 
Control™)”).
Connecting an HDMI compatible deviceYou can connect a Blu-ray Disc Player or DVD Player 
and listen to the audio through this system.
HDMI standby pass-through
In standby mode, the audio and video signal from the 
connected device can be sent to the connected TV. No 
sound will be output from this system.
3D compatibility
The system can pass through the 3D video signal of a 3D 
compatible Blu-ray Disc player to a FULL HD 3D TV.
Note:
Refer to the operating instructions of the device for video 
and audio signal output settings.
HDMI IN (ARC)
HDMI cable
HDMI IN 
OPTICAL OUT
Optical digital audio 
cable HDMI 
cable
HDMI OUT
HDMI cable
e.g., Blu-ray Disc player
RQT9860-Y_en_us.fm  Page 8  Monday, February 10, 2014  10:05 AM 
						

							9RQT9860
Connecting other equipment (AUX)You can connect other equipment such as Blu-ray 
Players, DVD Players, game consoles, set-top boxes, 
etc., and listen to the audio through this system.
Connecting the AC power supply cordDo not use an AC power supply cord from other 
equipment.
Conserving power
The system consumes a small amount of power 
(Z“Specifications”) when it is in standby mode. 
Disconnect the power supply cord if you do not use the 
system.Bluetooth
® connection
You can connect and play an audio device wirelessly 
through Bluetooth
®.
Preparation
• Turn on the Bluetooth
® feature on the device and place 
the device near the system.
• Press [`] to turn on the system.
Pairing a device1
Press [ ] to select “BLUETOOTH”.
If “PAIRING” is shown, continue with step 3.
2
Press and hold [ ] until “PAIRING” is shown.
3
Select “SC-HTE80” from the Bluetooth
® menu of 
the device.
If prompted for a passkey, input “0000”.
The device connects with this system automatically 
after pairing is complete.
The name of the connected device is shown.
Note:
• A device must be paired to connect.
• You can pair up to 8 devices with this system.
If a 9th device is paired, the device that has not been 
used the longest will be replaced.
Connecting a paired devicePreparation
If this system is connected to a Bluetooth
® device, 
disconnect it.
1
Press [ ] to enter Bluetooth
® mode.
“BLUETOOTH READY” is shown.
2
Select “SC-HTE80” from the Bluetooth
® menu of 
the device.
The name of the connected device is shown.
Disconnecting a device
Press and hold [ ] until “BLUETOOTH READY” is 
shown.
Note:
• The system can only connect to one device at a time.
• When “BLUETOOTH” is selected as the source, this 
system will automatically try to connect to the last 
connected device.
• The Bluetooth
® device will be disconnected when you 
select another source.
Audio cable
e.g., Set-top box
AC power supply cord (supplied)
To AC outlet
ENGLISH
RQT9860-Y_en_us.fm  Page 9  Monday, February 10, 2014  10:05 AM 
						

							10
RQT9860Basic controlsPreparation
Turn on the TV and/or connected device.1
Press [`] to turn on the system.
2
Press [INPUT] repeatedly to select the desired 
source.
3
Press [ ] to adjust the volume of the 
system.
Volume range: 0 to 100.
When “BLUETOOTH” is selected as the source
Select this system as the output speaker from the menu 
of the connected Bluetooth
® device.
When “BD/DVD” is selected as the source
On the TV, select the corresponding input of the TV that 
is connected to this system.
One-Touch Connection (NFC)For NFC-compatible Android™ devices onlyWhen you touch an NFC (Near Field Communication)-
compatible Bluetooth
® device on the NFC touch-area of 
this system, this system will automatically turn on, pair 
and connect to the Bluetooth
® device.
About NFC
NFC (Near Field Communication) is a short-range 
wireless technology that allows communication between 
NFC enabled devices with a touch.
Preparation
• Download and install the free Android™ app 
“Panasonic Music Streaming” on Google Play™.
• Enable “NFC” on your device.
1
Start the “Panasonic Music Streaming” app.
The application screen is shown. Follow the 
instructions to complete the settings.
Make sure to use the latest version of the app.
2
Touch and hold your device on the NFC touch 
area of this system until the Bluetooth
® 
connection is done.
- The device will beep. 
- A pop-up window is shown on the device.
- The name of the connected device is shown on the 
system.
Once the registration and connection of the 
Bluetooth
® device is complete, move the device 
away from the unit.
3
Start playback on your Bluetooth
® device.
Connecting another device
While connected, you can connect to another Bluetooth
® 
device by simply touching and holding it on the NFC 
touch area of this system. The previous device will be 
disconnected automatically.
Sound menu1
Press [SOUND] repeatedly to select the desired 
sound effect.
2
Press [R, T] repeatedly to select the desired 
setting and then press [OK].
TV BD/DVDBLUETOOTH
AUX
VOL
SOUND 
MODEThe various sound modes are 
enhanced with Dolby
® Virtual Speaker 
and 3D Surround effect to provide a 
surround effect similar to 5.1ch.
To cancel the Dolby Virtual Speaker 
and 3D Surround effect, select 
“STEREO”.
STANDARD
: Best suited for dramas 
and comedy shows.
STADIUM: Produces a realistic sound 
for live sports broadcasts.
MUSIC: Enhance the sound of 
musical instruments and songs.
CINEMA: Produces 
three-dimensional sound unique to 
movies.
NEWS: Enhance the voice of news 
and sports commentaries.
STEREO: Play any source of sound in 
stereo.
SUBWOOFERLEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
DIALOG Adjust the dialog level.
LEVEL 1
LEVEL 2
LEVEL 3
LEVEL 4
“DIALOG” is not shown when “3D 
CLR DIALOG” is set to “OFF”.
H.BASS Enhance the harmonic bass effect.
ON
OFF
RQT9860-Y_en_us.fm  Page 10  Monday, February 10, 2014  10:05 AM